[PATCH] ARM: at91: avoid defining CONFIG_* symbols in source code

[Arnd Bergmann]

In an invalid randconfig build (fixed by another patch),
I ran across this warning:

arch/arm/include/debug/at91.S:18:0: error: "CONFIG_DEBUG_UART_VIRT" redefined [-Werror]
 #define CONFIG_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS)

As Russell pointed out, we should never #define a macro starting
with CONFIG_ in a source file, as that is rather confusing.

This renames the macro to avoid the symbol clash.

Signed-off-by: Arnd Bergmann <arnd at arndb.de>
Suggested-by: Russell King <linux at arm.linux.org.uk>
---
 arch/arm/include/debug/at91.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S
index 43243be94cfc..d4ae3b8e2426 100644
--- a/arch/arm/include/debug/at91.S
+++ b/arch/arm/include/debug/at91.S
@@ -15,7 +15,7 @@
 #define AT91_IO_P2V(x) (x)
 #endif
 
-#define CONFIG_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS)
+#define AT91_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS)
 
 #define AT91_DBGU_SR		(0x14)	/* Status Register */
 #define AT91_DBGU_THR		(0x1c)	/* Transmitter Holding Register */
@@ -24,7 +24,7 @@
 
 	.macro	addruart, rp, rv, tmp
 	ldr	\rp, =CONFIG_DEBUG_UART_PHYS		@ System peripherals (phys address)
-	ldr	\rv, =CONFIG_DEBUG_UART_VIRT		@ System peripherals (virt address)
+	ldr	\rv, =AT91_DEBUG_UART_VIRT		@ System peripherals (virt address)
 	.endm
 
 	.macro	senduart,rd,rx
-- 
2.7.0