[PATCH] ARM: dts: add support for gpio buttons for exynos5422-odroidxu3

[Anand Moon]

Hi Krzysztof,

On 23 February 2016 at 17:32, Krzysztof Kozlowski
<k.kozlowski at samsung.com> wrote:
> 2016-02-23 18:17 GMT+09:00 Anand Moon <linux.amoon at gmail.com>:
>> Hi Krzysztof,
>>
>> On 23 February 2016 at 14:03, Krzysztof Kozlowski
>>>>>      };
>>>>> +
>>>>> +    gpio_keys {
>>>>> +            compatible = "gpio-keys";
>>>>> +            pinctrl-names = "default";
>>>>> +            pinctrl-0 = <&gpio_power_key>;
>>>>> +
>>>>> +            power_key {
>>>>> +                    interrupt-parent = <&gpx0>;
>>>>> +                    interrupts = <3 IRQ_TYPE_NONE>;
>>>>
>>>> Hmmm.... why you specify the interrupts?
>>>>
>>>>> +                    gpios = <&gpx0 3 GPIO_ACTIVE_LOW>;
>>>
>>> Please, explain it to me. The SW2 key is connected to PWRON of PMIC.
>>> However you are adding a GPIO key for external interrupt source 3
>>> (XE.INT3)... which comes from PMIC's ONOB.
>>>
>>> It's interesting.... how does it work? The PMIC will generate ONOB
>>> interrupt on PWRON low->high change (when PWRHOLD is high)?
>>>
>>> Best regards,
>>> Krzysztof
>>>
>>
>> I have re-base my changes on HK dts.
>> I could not find much details for the schematic diagram.
>> I don't know much low level detains on this.
>
> If I understand this correctly: you just took some vendor code,
> similar to existing code of Odroid U3, and without full understanding
> of the code nor checking with public schematics, you sent it.
>
> Taking vendor stuff is okay but you need to think about it, use it as
> an example and deliver proper solution based on that. Not copy-paste.
>
>> How dose this works: This changes will initial the shudown/reboot on Ubuntu.
>> I have also tested this similar feature on Odroid U3.
>
> Great :), yes it works because ONOB interrupt from PMIC is generated
> on key press. However this is not a strictly speaking key... I don't
> really know what to do with this commit and your explanation
> (Hardkernel has such code) is not sufficient to convince me.
>
> Best regards,
> Krzysztof

Nothing come easy to me, I had to do bit of work on this.
Internally I might not know the detail of the board and features of
the registers of the PMIC.
I have to improvise some time for changes. I don't know who is the
original author of the code.

It's relay hard to convince you on the changes, as I continue to
repeat the mistake.
I will try to improve my commits a be specific to the changes in the future.

Best Regards,
-Anand Moon