[PATCH 1/2] usb: dwc2: Move register save and restore functions
John Youn
John.Youn at synopsys.com
Tue Feb 23 00:42:02 PST 2016
Move the register save and restore functions into the host and gadget
specific files.
Signed-off-by: John Youn <johnyoun at synopsys.com>
---
drivers/usb/dwc2/core.c | 183 ----------------------------------------------
drivers/usb/dwc2/core.h | 13 ++++
drivers/usb/dwc2/gadget.c | 102 ++++++++++++++++++++++++++
drivers/usb/dwc2/hcd.c | 64 ++++++++++++++++
4 files changed, 179 insertions(+), 183 deletions(-)
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index 3c9c0b2..dc60339 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -56,189 +56,6 @@
#include "core.h"
#include "hcd.h"
-#if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
-/**
- * dwc2_backup_host_registers() - Backup controller host registers.
- * When suspending usb bus, registers needs to be backuped
- * if controller power is disabled once suspended.
- *
- * @hsotg: Programming view of the DWC_otg controller
- */
-static int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg)
-{
- struct dwc2_hregs_backup *hr;
- int i;
-
- dev_dbg(hsotg->dev, "%s\n", __func__);
-
- /* Backup Host regs */
- hr = &hsotg->hr_backup;
- hr->hcfg = dwc2_readl(hsotg->regs + HCFG);
- hr->haintmsk = dwc2_readl(hsotg->regs + HAINTMSK);
- for (i = 0; i < hsotg->core_params->host_channels; ++i)
- hr->hcintmsk[i] = dwc2_readl(hsotg->regs + HCINTMSK(i));
-
- hr->hprt0 = dwc2_read_hprt0(hsotg);
- hr->hfir = dwc2_readl(hsotg->regs + HFIR);
- hr->valid = true;
-
- return 0;
-}
-
-/**
- * dwc2_restore_host_registers() - Restore controller host registers.
- * When resuming usb bus, device registers needs to be restored
- * if controller power were disabled.
- *
- * @hsotg: Programming view of the DWC_otg controller
- */
-static int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg)
-{
- struct dwc2_hregs_backup *hr;
- int i;
-
- dev_dbg(hsotg->dev, "%s\n", __func__);
-
- /* Restore host regs */
- hr = &hsotg->hr_backup;
- if (!hr->valid) {
- dev_err(hsotg->dev, "%s: no host registers to restore\n",
- __func__);
- return -EINVAL;
- }
- hr->valid = false;
-
- dwc2_writel(hr->hcfg, hsotg->regs + HCFG);
- dwc2_writel(hr->haintmsk, hsotg->regs + HAINTMSK);
-
- for (i = 0; i < hsotg->core_params->host_channels; ++i)
- dwc2_writel(hr->hcintmsk[i], hsotg->regs + HCINTMSK(i));
-
- dwc2_writel(hr->hprt0, hsotg->regs + HPRT0);
- dwc2_writel(hr->hfir, hsotg->regs + HFIR);
- hsotg->frame_number = 0;
-
- return 0;
-}
-#else
-static inline int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg)
-{ return 0; }
-
-static inline int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg)
-{ return 0; }
-#endif
-
-#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
- IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
-/**
- * dwc2_backup_device_registers() - Backup controller device registers.
- * When suspending usb bus, registers needs to be backuped
- * if controller power is disabled once suspended.
- *
- * @hsotg: Programming view of the DWC_otg controller
- */
-static int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg)
-{
- struct dwc2_dregs_backup *dr;
- int i;
-
- dev_dbg(hsotg->dev, "%s\n", __func__);
-
- /* Backup dev regs */
- dr = &hsotg->dr_backup;
-
- dr->dcfg = dwc2_readl(hsotg->regs + DCFG);
- dr->dctl = dwc2_readl(hsotg->regs + DCTL);
- dr->daintmsk = dwc2_readl(hsotg->regs + DAINTMSK);
- dr->diepmsk = dwc2_readl(hsotg->regs + DIEPMSK);
- dr->doepmsk = dwc2_readl(hsotg->regs + DOEPMSK);
-
- for (i = 0; i < hsotg->num_of_eps; i++) {
- /* Backup IN EPs */
- dr->diepctl[i] = dwc2_readl(hsotg->regs + DIEPCTL(i));
-
- /* Ensure DATA PID is correctly configured */
- if (dr->diepctl[i] & DXEPCTL_DPID)
- dr->diepctl[i] |= DXEPCTL_SETD1PID;
- else
- dr->diepctl[i] |= DXEPCTL_SETD0PID;
-
- dr->dieptsiz[i] = dwc2_readl(hsotg->regs + DIEPTSIZ(i));
- dr->diepdma[i] = dwc2_readl(hsotg->regs + DIEPDMA(i));
-
- /* Backup OUT EPs */
- dr->doepctl[i] = dwc2_readl(hsotg->regs + DOEPCTL(i));
-
- /* Ensure DATA PID is correctly configured */
- if (dr->doepctl[i] & DXEPCTL_DPID)
- dr->doepctl[i] |= DXEPCTL_SETD1PID;
- else
- dr->doepctl[i] |= DXEPCTL_SETD0PID;
-
- dr->doeptsiz[i] = dwc2_readl(hsotg->regs + DOEPTSIZ(i));
- dr->doepdma[i] = dwc2_readl(hsotg->regs + DOEPDMA(i));
- }
- dr->valid = true;
- return 0;
-}
-
-/**
- * dwc2_restore_device_registers() - Restore controller device registers.
- * When resuming usb bus, device registers needs to be restored
- * if controller power were disabled.
- *
- * @hsotg: Programming view of the DWC_otg controller
- */
-static int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg)
-{
- struct dwc2_dregs_backup *dr;
- u32 dctl;
- int i;
-
- dev_dbg(hsotg->dev, "%s\n", __func__);
-
- /* Restore dev regs */
- dr = &hsotg->dr_backup;
- if (!dr->valid) {
- dev_err(hsotg->dev, "%s: no device registers to restore\n",
- __func__);
- return -EINVAL;
- }
- dr->valid = false;
-
- dwc2_writel(dr->dcfg, hsotg->regs + DCFG);
- dwc2_writel(dr->dctl, hsotg->regs + DCTL);
- dwc2_writel(dr->daintmsk, hsotg->regs + DAINTMSK);
- dwc2_writel(dr->diepmsk, hsotg->regs + DIEPMSK);
- dwc2_writel(dr->doepmsk, hsotg->regs + DOEPMSK);
-
- for (i = 0; i < hsotg->num_of_eps; i++) {
- /* Restore IN EPs */
- dwc2_writel(dr->diepctl[i], hsotg->regs + DIEPCTL(i));
- dwc2_writel(dr->dieptsiz[i], hsotg->regs + DIEPTSIZ(i));
- dwc2_writel(dr->diepdma[i], hsotg->regs + DIEPDMA(i));
-
- /* Restore OUT EPs */
- dwc2_writel(dr->doepctl[i], hsotg->regs + DOEPCTL(i));
- dwc2_writel(dr->doeptsiz[i], hsotg->regs + DOEPTSIZ(i));
- dwc2_writel(dr->doepdma[i], hsotg->regs + DOEPDMA(i));
- }
-
- /* Set the Power-On Programming done bit */
- dctl = dwc2_readl(hsotg->regs + DCTL);
- dctl |= DCTL_PWRONPRGDONE;
- dwc2_writel(dctl, hsotg->regs + DCTL);
-
- return 0;
-}
-#else
-static inline int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg)
-{ return 0; }
-
-static inline int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg)
-{ return 0; }
-#endif
-
/**
* dwc2_backup_global_registers() - Backup global controller registers.
* When suspending usb bus, registers needs to be backuped
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 1159259..606629a 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -1295,6 +1295,8 @@ extern void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg);
extern void dwc2_hsotg_disconnect(struct dwc2_hsotg *dwc2);
extern int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode);
#define dwc2_is_device_connected(hsotg) (hsotg->connected)
+int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg);
+int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg);
#else
static inline int dwc2_hsotg_remove(struct dwc2_hsotg *dwc2)
{ return 0; }
@@ -1312,6 +1314,10 @@ static inline int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg,
int testmode)
{ return 0; }
#define dwc2_is_device_connected(hsotg) (0)
+static inline int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg)
+{ return 0; }
+static inline int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg)
+{ return 0; }
#endif
#if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
@@ -1320,6 +1326,8 @@ extern int dwc2_hcd_get_future_frame_number(struct dwc2_hsotg *hsotg, int us);
extern void dwc2_hcd_connect(struct dwc2_hsotg *hsotg);
extern void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force);
extern void dwc2_hcd_start(struct dwc2_hsotg *hsotg);
+int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg);
+int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg);
#else
static inline int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg)
{ return 0; }
@@ -1332,6 +1340,11 @@ static inline void dwc2_hcd_start(struct dwc2_hsotg *hsotg) {}
static inline void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) {}
static inline int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq)
{ return 0; }
+static inline int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg)
+{ return 0; }
+static inline int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg)
+{ return 0; }
+
#endif
#endif /* __DWC2_CORE_H__ */
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 422ab7d..e9940dd 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3668,3 +3668,105 @@ int dwc2_hsotg_resume(struct dwc2_hsotg *hsotg)
return 0;
}
+
+/**
+ * dwc2_backup_device_registers() - Backup controller device registers.
+ * When suspending usb bus, registers needs to be backuped
+ * if controller power is disabled once suspended.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg)
+{
+ struct dwc2_dregs_backup *dr;
+ int i;
+
+ dev_dbg(hsotg->dev, "%s\n", __func__);
+
+ /* Backup dev regs */
+ dr = &hsotg->dr_backup;
+
+ dr->dcfg = dwc2_readl(hsotg->regs + DCFG);
+ dr->dctl = dwc2_readl(hsotg->regs + DCTL);
+ dr->daintmsk = dwc2_readl(hsotg->regs + DAINTMSK);
+ dr->diepmsk = dwc2_readl(hsotg->regs + DIEPMSK);
+ dr->doepmsk = dwc2_readl(hsotg->regs + DOEPMSK);
+
+ for (i = 0; i < hsotg->num_of_eps; i++) {
+ /* Backup IN EPs */
+ dr->diepctl[i] = dwc2_readl(hsotg->regs + DIEPCTL(i));
+
+ /* Ensure DATA PID is correctly configured */
+ if (dr->diepctl[i] & DXEPCTL_DPID)
+ dr->diepctl[i] |= DXEPCTL_SETD1PID;
+ else
+ dr->diepctl[i] |= DXEPCTL_SETD0PID;
+
+ dr->dieptsiz[i] = dwc2_readl(hsotg->regs + DIEPTSIZ(i));
+ dr->diepdma[i] = dwc2_readl(hsotg->regs + DIEPDMA(i));
+
+ /* Backup OUT EPs */
+ dr->doepctl[i] = dwc2_readl(hsotg->regs + DOEPCTL(i));
+
+ /* Ensure DATA PID is correctly configured */
+ if (dr->doepctl[i] & DXEPCTL_DPID)
+ dr->doepctl[i] |= DXEPCTL_SETD1PID;
+ else
+ dr->doepctl[i] |= DXEPCTL_SETD0PID;
+
+ dr->doeptsiz[i] = dwc2_readl(hsotg->regs + DOEPTSIZ(i));
+ dr->doepdma[i] = dwc2_readl(hsotg->regs + DOEPDMA(i));
+ }
+ dr->valid = true;
+ return 0;
+}
+
+/**
+ * dwc2_restore_device_registers() - Restore controller device registers.
+ * When resuming usb bus, device registers needs to be restored
+ * if controller power were disabled.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg)
+{
+ struct dwc2_dregs_backup *dr;
+ u32 dctl;
+ int i;
+
+ dev_dbg(hsotg->dev, "%s\n", __func__);
+
+ /* Restore dev regs */
+ dr = &hsotg->dr_backup;
+ if (!dr->valid) {
+ dev_err(hsotg->dev, "%s: no device registers to restore\n",
+ __func__);
+ return -EINVAL;
+ }
+ dr->valid = false;
+
+ dwc2_writel(dr->dcfg, hsotg->regs + DCFG);
+ dwc2_writel(dr->dctl, hsotg->regs + DCTL);
+ dwc2_writel(dr->daintmsk, hsotg->regs + DAINTMSK);
+ dwc2_writel(dr->diepmsk, hsotg->regs + DIEPMSK);
+ dwc2_writel(dr->doepmsk, hsotg->regs + DOEPMSK);
+
+ for (i = 0; i < hsotg->num_of_eps; i++) {
+ /* Restore IN EPs */
+ dwc2_writel(dr->diepctl[i], hsotg->regs + DIEPCTL(i));
+ dwc2_writel(dr->dieptsiz[i], hsotg->regs + DIEPTSIZ(i));
+ dwc2_writel(dr->diepdma[i], hsotg->regs + DIEPDMA(i));
+
+ /* Restore OUT EPs */
+ dwc2_writel(dr->doepctl[i], hsotg->regs + DOEPCTL(i));
+ dwc2_writel(dr->doeptsiz[i], hsotg->regs + DOEPTSIZ(i));
+ dwc2_writel(dr->doepdma[i], hsotg->regs + DOEPDMA(i));
+ }
+
+ /* Set the Power-On Programming done bit */
+ dctl = dwc2_readl(hsotg->regs + DCTL);
+ dctl |= DCTL_PWRONPRGDONE;
+ dwc2_writel(dctl, hsotg->regs + DCTL);
+
+ return 0;
+}
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 2b5a706..b403f6a 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -3433,3 +3433,67 @@ void dwc2_hcd_remove(struct dwc2_hsotg *hsotg)
kfree(hsotg->frame_num_array);
#endif
}
+
+/**
+ * dwc2_backup_host_registers() - Backup controller host registers.
+ * When suspending usb bus, registers needs to be backuped
+ * if controller power is disabled once suspended.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg)
+{
+ struct dwc2_hregs_backup *hr;
+ int i;
+
+ dev_dbg(hsotg->dev, "%s\n", __func__);
+
+ /* Backup Host regs */
+ hr = &hsotg->hr_backup;
+ hr->hcfg = dwc2_readl(hsotg->regs + HCFG);
+ hr->haintmsk = dwc2_readl(hsotg->regs + HAINTMSK);
+ for (i = 0; i < hsotg->core_params->host_channels; ++i)
+ hr->hcintmsk[i] = dwc2_readl(hsotg->regs + HCINTMSK(i));
+
+ hr->hprt0 = dwc2_read_hprt0(hsotg);
+ hr->hfir = dwc2_readl(hsotg->regs + HFIR);
+ hr->valid = true;
+
+ return 0;
+}
+
+/**
+ * dwc2_restore_host_registers() - Restore controller host registers.
+ * When resuming usb bus, device registers needs to be restored
+ * if controller power were disabled.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg)
+{
+ struct dwc2_hregs_backup *hr;
+ int i;
+
+ dev_dbg(hsotg->dev, "%s\n", __func__);
+
+ /* Restore host regs */
+ hr = &hsotg->hr_backup;
+ if (!hr->valid) {
+ dev_err(hsotg->dev, "%s: no host registers to restore\n",
+ __func__);
+ return -EINVAL;
+ }
+ hr->valid = false;
+
+ dwc2_writel(hr->hcfg, hsotg->regs + HCFG);
+ dwc2_writel(hr->haintmsk, hsotg->regs + HAINTMSK);
+
+ for (i = 0; i < hsotg->core_params->host_channels; ++i)
+ dwc2_writel(hr->hcintmsk[i], hsotg->regs + HCINTMSK(i));
+
+ dwc2_writel(hr->hprt0, hsotg->regs + HPRT0);
+ dwc2_writel(hr->hfir, hsotg->regs + HFIR);
+ hsotg->frame_number = 0;
+
+ return 0;
+}
--
2.6.3
More information about the linux-arm-kernel
mailing list