[PATCH] ARM: dts: add support for gpio buttons for exynos5422-odroidxu3

[Krzysztof Kozlowski]

On 23.02.2016 17:21, Krzysztof Kozlowski wrote:
> On 23.02.2016 17:01, Anand Moon wrote:
>> Add support for gpio-based button on Odroid-XU3 boards
>> for reboot/poweroff feature.
>>
>> Signed-off-by: Anand Moon <linux.amoon at gmail.com>
>> ---
>> changes rebase based on linux next-20160222.
>>
>> Tested on Odroid-XU4
>>
>> dmesg output.
>> [    3.286068] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/power_key[0]' - status (0)
>> [    3.286206] gpio-11 (power key): gpiod_set_debounce: missing set() or set_debounce() operations
>> [    3.286600] input: gpio_keys as /devices/platform/gpio_keys/input/input0
>> ---
>>  arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 22 ++++++++++++++++++++++
>>  1 file changed, 22 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
>> index 1bd507b..db9770b 100644
>> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
>> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
>> @@ -11,6 +11,7 @@
>>  */
>>  
>>  #include <dt-bindings/clock/samsung,s2mps11.h>
>> +#include <dt-bindings/input/input.h>
>>  #include <dt-bindings/interrupt-controller/irq.h>
>>  #include <dt-bindings/gpio/gpio.h>
>>  #include <dt-bindings/sound/samsung-i2s.h>
>> @@ -54,6 +55,22 @@
>>  		#cooling-cells = <2>;
>>  		cooling-levels = <0 130 170 230>;
>>  	};
>> +
>> +	gpio_keys {
>> +		compatible = "gpio-keys";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&gpio_power_key>;
>> +
>> +		power_key {
>> +			interrupt-parent = <&gpx0>;
>> +			interrupts = <3 IRQ_TYPE_NONE>;
> 
> Hmmm.... why you specify the interrupts?
> 
>> +			gpios = <&gpx0 3 GPIO_ACTIVE_LOW>;

Please, explain it to me. The SW2 key is connected to PWRON of PMIC.
However you are adding a GPIO key for external interrupt source 3
(XE.INT3)... which comes from PMIC's ONOB.

It's interesting.... how does it work? The PMIC will generate ONOB
interrupt on PWRON low->high change (when PWRHOLD is high)?

Best regards,
Krzysztof