[PATCH v5 04/11] drm/hisilicon: Add plane driver for ADE
Xinliang Liu
xinliang.liu at linaro.org
Mon Feb 22 19:00:24 PST 2016
Add plane funcs and helper funcs for ADE.
v5: None.
v4: None.
v3:
- A few cleanup.
v2:
- Remove abtraction layer.
Signed-off-by: Xinliang Liu <xinliang.liu at linaro.org>
---
drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c | 535 +++++++++++++++++++++++-
1 file changed, 534 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
index dbdeb1fc33e3..fae5f0afadb8 100644
--- a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
+++ b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
@@ -27,13 +27,23 @@
#include <drm/drm_crtc_helper.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
+#include <drm/drm_plane_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_fb_cma_helper.h>
#include "kirin_drm_drv.h"
#include "kirin_ade_reg.h"
+#define PRIMARY_CH ADE_CH1 /* primary plane */
+#define OUT_OVLY ADE_OVLY2 /* output overlay compositor */
+#define ADE_DEBUG 1
+
#define to_ade_crtc(crtc) \
container_of(crtc, struct ade_crtc, base)
+#define to_ade_plane(plane) \
+ container_of(plane, struct ade_plane, base)
+
struct ade_hw_ctx {
void __iomem *base;
struct regmap *noc_regmap;
@@ -52,11 +62,76 @@ struct ade_crtc {
u32 out_format;
};
+struct ade_plane {
+ struct drm_plane base;
+ void *ctx;
+ u8 ch; /* channel */
+};
+
struct ade_data {
struct ade_crtc acrtc;
+ struct ade_plane aplane[ADE_CH_NUM];
struct ade_hw_ctx ctx;
};
+/* ade-format info: */
+struct ade_format {
+ u32 pixel_format;
+ enum ade_fb_format ade_format;
+};
+
+static const struct ade_format ade_formats[] = {
+ /* 16bpp RGB: */
+ { DRM_FORMAT_RGB565, ADE_RGB_565 },
+ { DRM_FORMAT_BGR565, ADE_BGR_565 },
+ /* 24bpp RGB: */
+ { DRM_FORMAT_RGB888, ADE_RGB_888 },
+ { DRM_FORMAT_BGR888, ADE_BGR_888 },
+ /* 32bpp [A]RGB: */
+ { DRM_FORMAT_XRGB8888, ADE_XRGB_8888 },
+ { DRM_FORMAT_XBGR8888, ADE_XBGR_8888 },
+ { DRM_FORMAT_RGBA8888, ADE_RGBA_8888 },
+ { DRM_FORMAT_BGRA8888, ADE_BGRA_8888 },
+ { DRM_FORMAT_ARGB8888, ADE_ARGB_8888 },
+ { DRM_FORMAT_ABGR8888, ADE_ABGR_8888 },
+};
+
+static const u32 channel_formats1[] = {
+ /* channel 1,2,3,4 */
+ DRM_FORMAT_RGB565, DRM_FORMAT_BGR565, DRM_FORMAT_RGB888,
+ DRM_FORMAT_BGR888, DRM_FORMAT_XRGB8888, DRM_FORMAT_XBGR8888,
+ DRM_FORMAT_RGBA8888, DRM_FORMAT_BGRA8888, DRM_FORMAT_ARGB8888,
+ DRM_FORMAT_ABGR8888
+};
+
+u32 ade_get_channel_formats(u8 ch, const u32 **formats)
+{
+ switch (ch) {
+ case ADE_CH1:
+ *formats = channel_formats1;
+ return ARRAY_SIZE(channel_formats1);
+ default:
+ DRM_ERROR("no this channel %d\n", ch);
+ *formats = NULL;
+ return 0;
+ }
+}
+
+/* convert from fourcc format to ade format */
+static u32 ade_get_format(u32 pixel_format)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ade_formats); i++)
+ if (ade_formats[i].pixel_format == pixel_format)
+ return ade_formats[i].ade_format;
+
+ /* not found */
+ DRM_ERROR("Not found pixel format!!fourcc_format= %d\n",
+ pixel_format);
+ return ADE_FORMAT_NOT_SUPPORT;
+}
+
static void ade_update_reload_bit(void __iomem *base, u32 bit_num, u32 val)
{
u32 bit_ofst, reg_num;
@@ -89,7 +164,7 @@ static void ade_init(struct ade_hw_ctx *ctx)
/* clear overlay */
writel(0, base + ADE_OVLY1_TRANS_CFG);
writel(0, base + ADE_OVLY_CTL);
- writel(0, base + ADE_OVLYX_CTL(ADE_OVLY2));
+ writel(0, base + ADE_OVLYX_CTL(OUT_OVLY));
/* clear reset and reload regs */
writel(MASK(32), base + ADE_SOFT_RST_SEL(0));
writel(MASK(32), base + ADE_SOFT_RST_SEL(1));
@@ -147,6 +222,10 @@ static void ade_ldi_set_mode(struct ade_crtc *acrtc,
mode->clock * 1000, ret);
adj_mode->clock = clk_get_rate(ctx->ade_pix_clk) / 1000;
+ /* set overlay compositor output size */
+ writel(((width - 1) << OUTPUT_XSIZE_OFST) | (height - 1),
+ base + ADE_OVLY_OUTPUT_SIZE(OUT_OVLY));
+
/* ctran6 setting */
writel(CTRAN_BYPASS_ON, base + ADE_CTRAN_DIS(ADE_CTRAN6));
/* the configured value is actual value - 1 */
@@ -219,6 +298,10 @@ static void ade_display_enable(struct ade_crtc *acrtc)
void __iomem *base = ctx->base;
u32 out_fmt = acrtc->out_format;
+ /* enable output overlay compositor */
+ writel(ADE_ENABLE, base + ADE_OVLYX_CTL(OUT_OVLY));
+ ade_update_reload_bit(base, OVLY_OFST + OUT_OVLY, 0);
+
/* display source setting */
writel(DISP_SRC_OVLY2, base + ADE_DISP_SRC_CFG);
@@ -232,6 +315,97 @@ static void ade_display_enable(struct ade_crtc *acrtc)
writel(DSI_PCLK_ON, base + LDI_HDMI_DSI_GT);
}
+#if ADE_DEBUG
+static void ade_rdma_dump_regs(void __iomem *base, u32 ch)
+{
+ u32 reg_ctrl, reg_addr, reg_size, reg_stride, reg_space, reg_en;
+ u32 val;
+
+ reg_ctrl = RD_CH_CTRL(ch);
+ reg_addr = RD_CH_ADDR(ch);
+ reg_size = RD_CH_SIZE(ch);
+ reg_stride = RD_CH_STRIDE(ch);
+ reg_space = RD_CH_SPACE(ch);
+ reg_en = RD_CH_EN(ch);
+
+ val = ade_read_reload_bit(base, RDMA_OFST + ch);
+ DRM_DEBUG_DRIVER("[rdma%d]: reload(%d)\n", ch + 1, val);
+ val = readl(base + reg_ctrl);
+ DRM_DEBUG_DRIVER("[rdma%d]: reg_ctrl(0x%08x)\n", ch + 1, val);
+ val = readl(base + reg_addr);
+ DRM_DEBUG_DRIVER("[rdma%d]: reg_addr(0x%08x)\n", ch + 1, val);
+ val = readl(base + reg_size);
+ DRM_DEBUG_DRIVER("[rdma%d]: reg_size(0x%08x)\n", ch + 1, val);
+ val = readl(base + reg_stride);
+ DRM_DEBUG_DRIVER("[rdma%d]: reg_stride(0x%08x)\n", ch + 1, val);
+ val = readl(base + reg_space);
+ DRM_DEBUG_DRIVER("[rdma%d]: reg_space(0x%08x)\n", ch + 1, val);
+ val = readl(base + reg_en);
+ DRM_DEBUG_DRIVER("[rdma%d]: reg_en(0x%08x)\n", ch + 1, val);
+}
+
+static void ade_clip_dump_regs(void __iomem *base, u32 ch)
+{
+ u32 val;
+
+ val = ade_read_reload_bit(base, CLIP_OFST + ch);
+ DRM_DEBUG_DRIVER("[clip%d]: reload(%d)\n", ch + 1, val);
+ val = readl(base + ADE_CLIP_DISABLE(ch));
+ DRM_DEBUG_DRIVER("[clip%d]: reg_clip_disable(0x%08x)\n", ch + 1, val);
+ val = readl(base + ADE_CLIP_SIZE0(ch));
+ DRM_DEBUG_DRIVER("[clip%d]: reg_clip_size0(0x%08x)\n", ch + 1, val);
+ val = readl(base + ADE_CLIP_SIZE1(ch));
+ DRM_DEBUG_DRIVER("[clip%d]: reg_clip_size1(0x%08x)\n", ch + 1, val);
+}
+
+static void ade_compositor_routing_dump_regs(void __iomem *base, u32 ch)
+{
+ u8 ovly_ch = 0; /* TODO: Only primary plane now */
+ u32 val;
+
+ val = readl(base + ADE_OVLY_CH_XY0(ovly_ch));
+ DRM_DEBUG_DRIVER("[overlay ch%d]: reg_ch_xy0(0x%08x)\n", ovly_ch, val);
+ val = readl(base + ADE_OVLY_CH_XY1(ovly_ch));
+ DRM_DEBUG_DRIVER("[overlay ch%d]: reg_ch_xy1(0x%08x)\n", ovly_ch, val);
+ val = readl(base + ADE_OVLY_CH_CTL(ovly_ch));
+ DRM_DEBUG_DRIVER("[overlay ch%d]: reg_ch_ctl(0x%08x)\n", ovly_ch, val);
+}
+
+static void ade_dump_overlay_compositor_regs(void __iomem *base, u32 comp)
+{
+ u32 val;
+
+ val = ade_read_reload_bit(base, OVLY_OFST + comp);
+ DRM_DEBUG_DRIVER("[overlay%d]: reload(%d)\n", comp + 1, val);
+ writel(ADE_ENABLE, base + ADE_OVLYX_CTL(comp));
+ DRM_DEBUG_DRIVER("[overlay%d]: reg_ctl(0x%08x)\n", comp + 1, val);
+ val = readl(base + ADE_OVLY_CTL);
+ DRM_DEBUG_DRIVER("ovly_ctl(0x%08x)\n", val);
+}
+
+static void ade_dump_regs(void __iomem *base)
+{
+ u32 i;
+
+ /* dump channel regs */
+ for (i = 0; i < ADE_CH_NUM; i++) {
+ /* dump rdma regs */
+ ade_rdma_dump_regs(base, i);
+
+ /* dump clip regs */
+ ade_clip_dump_regs(base, i);
+
+ /* dump compositor routing regs */
+ ade_compositor_routing_dump_regs(base, i);
+ }
+
+ /* dump overlay compositor regs */
+ ade_dump_overlay_compositor_regs(base, OUT_OVLY);
+}
+#else
+static void ade_dump_regs(void __iomem *base) { }
+#endif
+
static void ade_crtc_enable(struct drm_crtc *crtc)
{
struct ade_crtc *acrtc = to_ade_crtc(crtc);
@@ -249,6 +423,7 @@ static void ade_crtc_enable(struct drm_crtc *crtc)
ade_set_medianoc_qos(acrtc);
ade_display_enable(acrtc);
+ ade_dump_regs(ctx->base);
acrtc->enable = true;
}
@@ -303,6 +478,7 @@ static void ade_crtc_atomic_flush(struct drm_crtc *crtc,
/* only crtc is eanbled regs take effect */
if (acrtc->enable) {
+ ade_dump_regs(base);
/* flush ade regitsters */
writel(ADE_ENABLE, base + ADE_EN);
}
@@ -359,6 +535,338 @@ static int ade_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
return 0;
}
+static void ade_rdma_set(void __iomem *base, struct drm_framebuffer *fb,
+ u32 ch, u32 y, u32 in_h, u32 fmt)
+{
+ struct drm_gem_cma_object *obj = drm_fb_cma_get_gem_obj(fb, 0);
+ u32 reg_ctrl, reg_addr, reg_size, reg_stride, reg_space, reg_en;
+ u32 stride = fb->pitches[0];
+ u32 addr = (u32)obj->paddr + y * stride;
+
+ DRM_DEBUG_DRIVER("rdma%d: (y=%d, height=%d), stride=%d, paddr=0x%x\n",
+ ch + 1, y, in_h, stride, (u32)obj->paddr);
+ DRM_DEBUG_DRIVER("addr=0x%x, fb:%dx%d, pixel_format=%d(%s)\n",
+ addr, fb->width, fb->height, fmt,
+ drm_get_format_name(fb->pixel_format));
+
+ /* get reg offset */
+ reg_ctrl = RD_CH_CTRL(ch);
+ reg_addr = RD_CH_ADDR(ch);
+ reg_size = RD_CH_SIZE(ch);
+ reg_stride = RD_CH_STRIDE(ch);
+ reg_space = RD_CH_SPACE(ch);
+ reg_en = RD_CH_EN(ch);
+
+ /*
+ * TODO: set rotation
+ */
+ writel((fmt << 16) & 0x1f0000, base + reg_ctrl);
+ writel(addr, base + reg_addr);
+ writel((in_h << 16) | stride, base + reg_size);
+ writel(stride, base + reg_stride);
+ writel(in_h * stride, base + reg_space);
+ writel(ADE_ENABLE, base + reg_en);
+ ade_update_reload_bit(base, RDMA_OFST + ch, 0);
+}
+
+static void ade_rdma_disable(void __iomem *base, u32 ch)
+{
+ u32 reg_en;
+
+ /* get reg offset */
+ reg_en = RD_CH_EN(ch);
+ writel(0, base + reg_en);
+ ade_update_reload_bit(base, RDMA_OFST + ch, 1);
+}
+
+static void ade_clip_set(void __iomem *base, u32 ch, u32 fb_w, u32 x,
+ u32 in_w, u32 in_h)
+{
+ u32 disable_val;
+ u32 clip_left;
+ u32 clip_right;
+
+ /*
+ * clip width, no need to clip height
+ */
+ if (fb_w == in_w) { /* bypass */
+ disable_val = 1;
+ clip_left = 0;
+ clip_right = 0;
+ } else {
+ disable_val = 0;
+ clip_left = x;
+ clip_right = fb_w - (x + in_w) - 1;
+ }
+
+ DRM_DEBUG_DRIVER("clip%d: clip_left=%d, clip_right=%d\n",
+ ch + 1, clip_left, clip_right);
+
+ writel(disable_val, base + ADE_CLIP_DISABLE(ch));
+ writel((fb_w - 1) << 16 | (in_h - 1), base + ADE_CLIP_SIZE0(ch));
+ writel(clip_left << 16 | clip_right, base + ADE_CLIP_SIZE1(ch));
+ ade_update_reload_bit(base, CLIP_OFST + ch, 0);
+}
+
+static void ade_clip_disable(void __iomem *base, u32 ch)
+{
+ writel(1, base + ADE_CLIP_DISABLE(ch));
+ ade_update_reload_bit(base, CLIP_OFST + ch, 1);
+}
+
+static bool has_Alpha_channel(int format)
+{
+ switch (format) {
+ case ADE_ARGB_8888:
+ case ADE_ABGR_8888:
+ case ADE_RGBA_8888:
+ case ADE_BGRA_8888:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static void ade_get_blending_params(u32 fmt, u8 glb_alpha, u8 *alp_mode,
+ u8 *alp_sel, u8 *under_alp_sel)
+{
+ bool has_alpha = has_Alpha_channel(fmt);
+
+ /*
+ * get alp_mode
+ */
+ if (has_alpha && glb_alpha < 255)
+ *alp_mode = ADE_ALP_PIXEL_AND_GLB;
+ else if (has_alpha)
+ *alp_mode = ADE_ALP_PIXEL;
+ else
+ *alp_mode = ADE_ALP_GLOBAL;
+
+ /*
+ * get alp sel
+ */
+ *alp_sel = ADE_ALP_MUL_COEFF_3; /* 1 */
+ *under_alp_sel = ADE_ALP_MUL_COEFF_2; /* 0 */
+}
+
+static void ade_compositor_routing_set(void __iomem *base, u8 ch,
+ u32 x0, u32 y0,
+ u32 in_w, u32 in_h, u32 fmt)
+{
+ u8 ovly_ch = 0; /* TODO: This is the zpos, only one plane now */
+ u8 glb_alpha = 255;
+ u32 x1 = x0 + in_w - 1;
+ u32 y1 = y0 + in_h - 1;
+ u32 val;
+ u8 alp_sel;
+ u8 under_alp_sel;
+ u8 alp_mode;
+
+ ade_get_blending_params(fmt, glb_alpha, &alp_mode, &alp_sel,
+ &under_alp_sel);
+
+ /* overlay routing setting
+ */
+ writel(x0 << 16 | y0, base + ADE_OVLY_CH_XY0(ovly_ch));
+ writel(x1 << 16 | y1, base + ADE_OVLY_CH_XY1(ovly_ch));
+ val = (ch + 1) << CH_SEL_OFST | BIT(CH_EN_OFST) |
+ alp_sel << CH_ALP_SEL_OFST |
+ under_alp_sel << CH_UNDER_ALP_SEL_OFST |
+ glb_alpha << CH_ALP_GBL_OFST |
+ alp_mode << CH_ALP_MODE_OFST;
+ writel(val, base + ADE_OVLY_CH_CTL(ovly_ch));
+ /* connect this plane/channel to overlay2 compositor */
+ ade_update_bits(base + ADE_OVLY_CTL, CH_OVLY_SEL_OFST(ovly_ch),
+ CH_OVLY_SEL_MASK, CH_OVLY_SEL_VAL(OUT_OVLY));
+}
+
+static void ade_compositor_routing_disable(void __iomem *base, u32 ch)
+{
+ u8 ovly_ch = 0; /* TODO: Only primary plane now */
+
+ /* disable this plane/channel */
+ ade_update_bits(base + ADE_OVLY_CH_CTL(ovly_ch), CH_EN_OFST,
+ MASK(1), 0);
+ /* dis-connect this plane/channel of overlay2 compositor */
+ ade_update_bits(base + ADE_OVLY_CTL, CH_OVLY_SEL_OFST(ovly_ch),
+ CH_OVLY_SEL_MASK, 0);
+}
+
+/*
+ * Typicaly, a channel looks like: DMA-->clip-->scale-->ctrans-->compositor
+ */
+static void ade_update_channel(struct ade_plane *aplane,
+ struct drm_framebuffer *fb, int crtc_x,
+ int crtc_y, unsigned int crtc_w,
+ unsigned int crtc_h, u32 src_x,
+ u32 src_y, u32 src_w, u32 src_h)
+{
+ struct ade_hw_ctx *ctx = aplane->ctx;
+ void __iomem *base = ctx->base;
+ u32 fmt = ade_get_format(fb->pixel_format);
+ u32 ch = aplane->ch;
+ u32 in_w;
+ u32 in_h;
+
+ DRM_DEBUG_DRIVER("channel%d: src:(%d, %d)-%dx%d, crtc:(%d, %d)-%dx%d",
+ ch + 1, src_x, src_y, src_w, src_h,
+ crtc_x, crtc_y, crtc_w, crtc_h);
+
+ /* 1) DMA setting */
+ in_w = src_w;
+ in_h = src_h;
+ ade_rdma_set(base, fb, ch, src_y, in_h, fmt);
+
+ /* 2) clip setting */
+ ade_clip_set(base, ch, fb->width, src_x, in_w, in_h);
+
+ /* 3) TODO: scale setting for overlay planes */
+
+ /* 4) TODO: ctran/csc setting for overlay planes */
+
+ /* 5) compositor routing setting */
+ ade_compositor_routing_set(base, ch, crtc_x, crtc_y, in_w, in_h, fmt);
+}
+
+static void ade_disable_channel(struct ade_plane *aplane)
+{
+ struct ade_hw_ctx *ctx = aplane->ctx;
+ void __iomem *base = ctx->base;
+ u32 ch = aplane->ch;
+
+ DRM_DEBUG_DRIVER("disable channel%d\n", ch + 1);
+
+ /* disable read DMA */
+ ade_rdma_disable(base, ch);
+
+ /* disable clip */
+ ade_clip_disable(base, ch);
+
+ /* disable compositor routing */
+ ade_compositor_routing_disable(base, ch);
+}
+
+static int ade_plane_prepare_fb(struct drm_plane *plane,
+ const struct drm_plane_state *new_state)
+{
+ /* do nothing */
+ return 0;
+}
+
+static void ade_plane_cleanup_fb(struct drm_plane *plane,
+ const struct drm_plane_state *old_state)
+{
+ /* do nothing */
+}
+
+static int ade_plane_atomic_check(struct drm_plane *plane,
+ struct drm_plane_state *state)
+{
+ struct drm_framebuffer *fb = state->fb;
+ struct drm_crtc *crtc = state->crtc;
+ struct drm_crtc_state *crtc_state;
+ u32 src_x = state->src_x >> 16;
+ u32 src_y = state->src_y >> 16;
+ u32 src_w = state->src_w >> 16;
+ u32 src_h = state->src_h >> 16;
+ int crtc_x = state->crtc_x;
+ int crtc_y = state->crtc_y;
+ u32 crtc_w = state->crtc_w;
+ u32 crtc_h = state->crtc_h;
+ u32 fmt;
+
+ if (!crtc || !fb)
+ return 0;
+
+ fmt = ade_get_format(fb->pixel_format);
+ if (fmt == ADE_FORMAT_NOT_SUPPORT)
+ return -EINVAL;
+
+ crtc_state = drm_atomic_get_crtc_state(state->state, crtc);
+ if (IS_ERR(crtc_state))
+ return PTR_ERR(crtc_state);
+
+ if (src_w != crtc_w || src_h != crtc_h) {
+ DRM_ERROR("Scale not support!!!\n");
+ return -EINVAL;
+ }
+
+ if (src_x + src_w > fb->width ||
+ src_y + src_h > fb->height)
+ return -EINVAL;
+
+ if (crtc_x < 0 || crtc_y < 0)
+ return -EINVAL;
+
+ if (crtc_x + crtc_w > crtc_state->adjusted_mode.hdisplay ||
+ crtc_y + crtc_h > crtc_state->adjusted_mode.vdisplay)
+ return -EINVAL;
+
+ return 0;
+}
+
+static void ade_plane_atomic_update(struct drm_plane *plane,
+ struct drm_plane_state *old_state)
+{
+ struct drm_plane_state *state = plane->state;
+ struct ade_plane *aplane = to_ade_plane(plane);
+
+ ade_update_channel(aplane, state->fb, state->crtc_x, state->crtc_y,
+ state->crtc_w, state->crtc_h,
+ state->src_x >> 16, state->src_y >> 16,
+ state->src_w >> 16, state->src_h >> 16);
+}
+
+static void ade_plane_atomic_disable(struct drm_plane *plane,
+ struct drm_plane_state *old_state)
+{
+ struct ade_plane *aplane = to_ade_plane(plane);
+
+ ade_disable_channel(aplane);
+}
+
+static const struct drm_plane_helper_funcs ade_plane_helper_funcs = {
+ .prepare_fb = ade_plane_prepare_fb,
+ .cleanup_fb = ade_plane_cleanup_fb,
+ .atomic_check = ade_plane_atomic_check,
+ .atomic_update = ade_plane_atomic_update,
+ .atomic_disable = ade_plane_atomic_disable,
+};
+
+static struct drm_plane_funcs ade_plane_funcs = {
+ .update_plane = drm_atomic_helper_update_plane,
+ .disable_plane = drm_atomic_helper_disable_plane,
+ .set_property = drm_atomic_helper_plane_set_property,
+ .destroy = drm_plane_cleanup,
+ .reset = drm_atomic_helper_plane_reset,
+ .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
+};
+
+static int ade_plane_init(struct drm_device *dev, struct ade_plane *aplane,
+ enum drm_plane_type type)
+{
+ const u32 *fmts;
+ u32 fmts_cnt;
+ int ret = 0;
+
+ /* get properties */
+ fmts_cnt = ade_get_channel_formats(aplane->ch, &fmts);
+ if (ret)
+ return ret;
+
+ ret = drm_universal_plane_init(dev, &aplane->base, 1, &ade_plane_funcs,
+ fmts, fmts_cnt, type, NULL);
+ if (ret) {
+ DRM_ERROR("fail to init plane, ch=%d\n", aplane->ch);
+ return ret;
+ }
+
+ drm_plane_helper_add(&aplane->base, &ade_plane_helper_funcs);
+
+ return 0;
+}
+
static int ade_dts_parse(struct platform_device *pdev, struct ade_hw_ctx *ctx)
{
struct resource *res;
@@ -416,7 +924,10 @@ int ade_drm_init(struct drm_device *dev)
struct ade_data *ade;
struct ade_hw_ctx *ctx;
struct ade_crtc *acrtc;
+ struct ade_plane *aplane;
+ enum drm_plane_type type;
int ret;
+ int i;
ade = devm_kzalloc(dev->dev, sizeof(*ade), GFP_KERNEL);
if (!ade) {
@@ -434,6 +945,28 @@ int ade_drm_init(struct drm_device *dev)
if (ret)
return ret;
+ /*
+ * plane init
+ * TODO: Now only support primary plane, overlay planes
+ * need to do.
+ */
+ for (i = 0; i < ADE_CH_NUM; i++) {
+ aplane = &ade->aplane[i];
+ aplane->ch = i;
+ aplane->ctx = ctx;
+ type = i == PRIMARY_CH ? DRM_PLANE_TYPE_PRIMARY :
+ DRM_PLANE_TYPE_OVERLAY;
+
+ ret = ade_plane_init(dev, aplane, type);
+ if (ret)
+ return ret;
+ }
+
+ /* crtc init */
+ ret = ade_crtc_init(dev, &acrtc->base, &ade->aplane[PRIMARY_CH].base);
+ if (ret)
+ return ret;
+
return 0;
}
--
1.9.1
More information about the linux-arm-kernel
mailing list