[PATCH V2 3/4] ARM: dts: imx6ul: Add GPMI nand controller support

[Lothar Waßmann]

Hi,

On Sun, 21 Feb 2016 12:29:53 +0100 Michael Trimarchi wrote:
> Add support for GPMI nand controller.
> 
> Signed-off-by: Michael Trimarchi <michael at amarulasolutions.com>
> ---
> Changes V2:
> 	- drop special IMXUL type because seems that is compatible
> 	  with IMX6Q
> 
>  arch/arm/boot/dts/imx6ul.dtsi | 33 +++++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
> index f4daf97..1a486ac 100644
> --- a/arch/arm/boot/dts/imx6ul.dtsi
> +++ b/arch/arm/boot/dts/imx6ul.dtsi
> @@ -142,6 +142,39 @@
>  			reg = <0x00900000 0x20000>;
>  		};
>  
> +		dma_apbh: dma-apbh at 01804000 {
> +			compatible = "fsl,imx6ul-dma-apbh", "fsl,imx28-dma-apbh";
> +			reg = <0x01804000 0x2000>;
> +			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
> +			#dma-cells = <1>;
> +			dma-channels = <4>;
> +			clocks = <&clks IMX6UL_CLK_APBHDMA>;
> +		};
> +
> +		gpmi: gpmi-nand at 01806000 {
> +			compatible = "fsl,imx6q-gpmi-nand";
>
You should still add an imx6ul specific compatible (likewise to the
dma_apbh).



Lothar Waßmann