[PATCH v3] irqchip: irq-mvebu-odmi: new driver for platform MSI on Marvell 7K/8K

Jason Cooper jason at lakedaemon.net
Fri Feb 19 06:50:26 PST 2016


On Fri, Feb 19, 2016 at 02:47:29PM +0000, Marc Zyngier wrote:
> On 19/02/16 14:28, Jason Cooper wrote:
> > On Fri, Feb 19, 2016 at 02:15:46PM +0000, Marc Zyngier wrote:
> >> On 19/02/16 13:34, Thomas Petazzoni wrote:
> >>> This commits adds a new irqchip driver that handles the ODMI
> >>> controller found on Marvell 7K/8K processors. The ODMI controller
> >>> provide MSI interrupt functionality to on-board peripherals, much like
> >>> the GIC-v2m.
> >>>
> >>> Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
> >>> ---
> >>> Changes v2 -> v2:
> >>>  - Express NODMIS_SHIFT, NODMIS_PER_FRAME, NODMIS_MASK in term of each
> >>>    other. Suggested by Marc Zyngier.
> >>>  - Rework the global bitmask allocation to make sure we allocate a
> >>>    number of longs rather than a number of bytes, to avoid having the
> >>>    bitmap API (which operates on longs) access memory we haven't
> >>>    explicitly allocated. Reported by Marc Zyngier.
> >>>
> >>> Changes v1 -> v2:
> >>>  - Better commit title, as suggested by Marc Zyngier.
> >>>  - Improve the DT binding documentation, as suggested by Marc Zingier:
> >>>    add a reference to the GIC documentation, be more specific about
> >>>    the marvell,spi-base values, and add the requirement of the
> >>>    interrupt-parent property.
> >>>  - As suggested by Marc Zyngier, use a single global bitmap to
> >>>    allocate all ODMIs, regardless of the frame they belong to. As part
> >>>    of this change, the hwirq used to identify the interrupt inside the
> >>>    ODMI irqdomain are 0-based (instead of being based on their
> >>>    corresponding SPI base value), which allows to significantly
> >>>    simplify the allocation/free logic.
> >>> ---
> >>>  .../marvell,odmi-controller.txt                    |  41 ++++
> >>>  drivers/irqchip/Kconfig                            |   4 +
> >>>  drivers/irqchip/Makefile                           |   1 +
> >>>  drivers/irqchip/irq-mvebu-odmi.c                   | 248 +++++++++++++++++++++
> >>>  4 files changed, 294 insertions(+)
> >>>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
> >>>  create mode 100644 drivers/irqchip/irq-mvebu-odmi.c
> >>
> >> Reviewed-by: Marc Zyngier <marc.zyngier at arm.com>
> >>
> >> I'll queue that for 4.6.
> > 
> > I had it on my list to queue up, but you beat me to it.  :-)
> 
> Ah, sorry! The reason I was eager to queue it is because I have some
> related changes in the GIC/GICv2m department, simplifying a few things
> there:
> 
> http://git.kernel.org/cgit/linux/kernel/git/maz/arm-platforms.git/commit/?h=irq/gic-4.6&id=9b29f74f6b4b56aa4bb5cc91474aa2451de5c628
> 
> I'll post this on the list later today.

ah, no problem.  Whichever is easiest for you.  Just let me know.

thx,

Jason.



More information about the linux-arm-kernel mailing list