[PATCH v5 1/1] USB: core: let USB device know device node

[Philipp Zabel]

Hi Peter,

Am Dienstag, den 16.02.2016, 16:42 +0800 schrieb Peter Chen:
> From: Peter Chen <peter.chen at freescale.com>
> 
> Although most of USB devices are hot-plug's, there are still some devices
> are hard wired on the board, eg, for HSIC and SSIC interface USB devices.
> If these kinds of USB devices are multiple functions, and they can supply
> other interfaces like i2c, gpios for other devices, we may need to
> describe these at device tree.
> 
> In this commit, it uses "reg" in dts as physical port number to match
> the phyiscal port number decided by USB core, if they are the same,
> then the device node is for the device we are creating for USB core.
> 
> Signed-off-by: Peter Chen <peter.chen at freescale.com>
> ---
> Changes for v5:
> - Refine the code how to get the device node at usb_alloc_dev according
>   to Alan's comment.
> - Point out "usbVID,PID" is the recommented compatible, and others
>   compatibles at binding doc could also be used.
> 
> Changes for v4:
> - The range of "reg" should be 1-31, changing device node address
>   style as in lower case hexadecimal with leading zeroes suppressed
>   [binding doc, usb-device.txt]
> - Improve the example at binding doc, it describes node from the top
>   (the controller)
> - Delete the struct of_node * within struct usb_device
> - Using usb_hcd_find_raw_port_number to get raw port number under root
>   hub port
> 
> Changes for v3:
> - typo: s/descirbe/describe/
> 
> Changes for v2:
> - Fix build error reported by kbuild robot, lack of "static" for
>   inline usb_of_get_child_node
> - Fix typo, "devcie_node" -> "device_node"
> - Add kernel-doc for of_node at struct usb_device
> 
> Changes from RFC:
> - Fix the error address for binding doc, and add compatible for binding doc
> - Change get child node API from "usb_of_find_node" to
>   "usb_of_get_child_node"
> - Delete unecessary header files
> - One typo
> 
>  .../devicetree/bindings/usb/usb-device.txt         | 26 ++++++++++++
>  drivers/usb/core/Makefile                          |  2 +-
>  drivers/usb/core/of.c                              | 47 ++++++++++++++++++++++
>  drivers/usb/core/usb.c                             | 10 +++++
>  include/linux/usb/of.h                             |  7 ++++
>  5 files changed, 91 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/usb/usb-device.txt
>  create mode 100644 drivers/usb/core/of.c
> 
> diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt
> new file mode 100644
> index 0000000..a997a23
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/usb-device.txt
> @@ -0,0 +1,26 @@
> +Generic USB Device Properties
> +
> +Usually, we only use device tree for hard wired USB device.
> +The reference binding doc is from:
> +http://www.firmware.org/1275/bindings/usb/usb-1_0.ps
> +
> +Required properties:
> +- compatible: usbVID,PID. The other compatible strings from the above
> +  standard binding could also be used, but a device adhering to this
> +  binding may leave out all except for usbVID,PID.

I asked to document the format of VID and PID ("lower case hexadecimal
with leading zeroes suppressed") here.

> +- reg: the port number which this device is connecting to, the range
> +  is 1-31.
> +
> +Example:
> +
> +&usb1 {
> +	status = "okay";
> +
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	hub: genesys at 1 {
> +		compatible = "usb05e3,0608";

This should be:
		compatible = "usb5e3,608";

After those two issues are fixed,
Acked-by: Philipp Zabel <p.zabel at pengutronix.de>

best regards
Philipp