[PATCH] ARM: imx: Do L2 errata only if the L2 cache isn't enabled

[Shawn Guo]

On Sun, Feb 14, 2016 at 09:30:06AM +0100, Dirk Behme wrote:
> On 14.02.2016 09:18, Shawn Guo wrote:
> >On Fri, Feb 12, 2016 at 04:51:00PM +0100, Dirk Behme wrote:
> >>On 12.02.2016 15:16, Russell King - ARM Linux wrote:
> >>>On Fri, Feb 12, 2016 at 08:11:33AM +0100, Dirk Behme wrote:
> >>>>All the generic L2 cache handling code is encapsulated by a
> >>>>check if the L2 cache is enabled. If it's enabled already, the code
> >>>>is skipped.
> >>>>
> >>>>For the i.MX6 specific L2 cache handling we missed this check.
> >>>>Add it.
> >>>
> >>>What's the reasoning behind this?  The prefetch register is writable
> >>>while the L2 cache is enabled, unlike the auxiliary control register.
> >>
> >> From an internal log I have the following info:
> >>
> >>The write to the L2-Cache controller from non-secure world causes an
> >>imprecise
> >>external abort. If Linux runs from normal world the cache controller
> >>is already
> >>enabled and thus no configuration is needed by Linux.
> >
> >Dirk,
> >
> >Do you have a real use case of this, i.e. running Linux on i.MX6 in
> >non-secure world?
> 
> 
> Yes, in a scenario where one of the cores runs a RTOS.

Can you please reword the commit log to have the above non-secure world
user story mentioned in there?

Shawn