[PATCH v2 11/13] iommu: exynos: add support for v5 SYSMMU
Marek Szyprowski
m.szyprowski at samsung.com
Thu Feb 18 06:12:58 PST 2016
This patch adds support for v5 of SYSMMU controller, found in Samsung
Exynos 5433 SoCs. The main difference of v5 is support for 36-bit physical
address space and some changes in register layout and core clocks hanging.
This patch also adds support for ARM64 architecture, which is used by
Exynos 5433 SoCs.
Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
---
.../devicetree/bindings/iommu/samsung,sysmmu.txt | 5 +-
drivers/iommu/Kconfig | 2 +-
drivers/iommu/exynos-iommu.c | 187 +++++++++++++++------
3 files changed, 143 insertions(+), 51 deletions(-)
diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
index f61ca25ca136..85f068805dd8 100644
--- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
+++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
@@ -35,9 +35,10 @@ Required properties:
- interrupts: An interrupt specifier for interrupt signal of System MMU,
according to the format defined by a particular interrupt
controller.
-- clock-names: Should be "sysmmu" if the System MMU is needed to gate its clock.
+- clock-names: Should be "sysmmu" or a pair of "aclk" and "pclk" to gate
+ SYSMMU core clocks.
Optional "master" if the clock to the System MMU is gated by
- another gate clock other than "sysmmu" (usually main gate clock
+ another gate clock other core (usually main gate clock
of peripheral device this SYSMMU belongs to).
- clocks: Phandles for respective clocks described by clock-names.
- power-domains: Required if the System MMU is needed to gate its power.
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index a1e75cba18e0..1674de1cfed0 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -243,7 +243,7 @@ config TEGRA_IOMMU_SMMU
config EXYNOS_IOMMU
bool "Exynos IOMMU Support"
- depends on ARCH_EXYNOS && ARM && MMU
+ depends on ARCH_EXYNOS && MMU
select IOMMU_API
select ARM_DMA_USE_IOMMU
help
diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index 8e289e2a05fb..9c8ce951158d 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -1,6 +1,5 @@
-/* linux/drivers/iommu/exynos_iommu.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2011,2016 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
@@ -55,17 +54,25 @@ typedef u32 sysmmu_pte_t;
#define lv2ent_small(pent) ((*(pent) & 2) == 2)
#define lv2ent_large(pent) ((*(pent) & 3) == 1)
-static u32 sysmmu_page_offset(sysmmu_iova_t iova, u32 size)
-{
- return iova & (size - 1);
-}
-
-#define section_phys(sent) (*(sent) & SECT_MASK)
-#define section_offs(iova) sysmmu_page_offset((iova), SECT_SIZE)
-#define lpage_phys(pent) (*(pent) & LPAGE_MASK)
-#define lpage_offs(iova) sysmmu_page_offset((iova), LPAGE_SIZE)
-#define spage_phys(pent) (*(pent) & SPAGE_MASK)
-#define spage_offs(iova) sysmmu_page_offset((iova), SPAGE_SIZE)
+/*
+ * v1.x - v3.x SYSMMU supports 32bit physical and 32bit virtual address spaces
+ * v5.0 introduced support for 36bit physical address space by shifting
+ * all page entry values by 4 bits.
+ * All SYSMMU controllers in the system support the address spaces of the same
+ * size, so PG_ENT_SHIFT can be initialized on first SYSMMU probe to proper
+ * value (0 or 4).
+ */
+static short PG_ENT_SHIFT = -1;
+#define SYSMMU_PG_ENT_SHIFT 0
+#define SYSMMU_V5_PG_ENT_SHIFT 4
+
+#define sect_to_phys(ent) (((phys_addr_t) ent) << PG_ENT_SHIFT)
+#define section_phys(sent) (sect_to_phys(*(sent)) & SECT_MASK)
+#define section_offs(iova) (iova & (SECT_SIZE - 1))
+#define lpage_phys(pent) (sect_to_phys(*(pent)) & LPAGE_MASK)
+#define lpage_offs(iova) (iova & (LPAGE_SIZE - 1))
+#define spage_phys(pent) (sect_to_phys(*(pent)) & SPAGE_MASK)
+#define spage_offs(iova) (iova & (SPAGE_SIZE - 1))
#define NUM_LV1ENTRIES 4096
#define NUM_LV2ENTRIES (SECT_SIZE / SPAGE_SIZE)
@@ -84,13 +91,12 @@ static u32 lv2ent_offset(sysmmu_iova_t iova)
#define LV2TABLE_SIZE (NUM_LV2ENTRIES * sizeof(sysmmu_pte_t))
#define SPAGES_PER_LPAGE (LPAGE_SIZE / SPAGE_SIZE)
+#define lv2table_base(sent) (sect_to_phys(*(sent) & 0xFFFFFFC0))
-#define lv2table_base(sent) (*(sent) & 0xFFFFFC00)
-
-#define mk_lv1ent_sect(pa) ((pa) | 2)
-#define mk_lv1ent_page(pa) ((pa) | 1)
-#define mk_lv2ent_lpage(pa) ((pa) | 1)
-#define mk_lv2ent_spage(pa) ((pa) | 2)
+#define mk_lv1ent_sect(pa) ((pa >> PG_ENT_SHIFT) | 2)
+#define mk_lv1ent_page(pa) ((pa >> PG_ENT_SHIFT) | 1)
+#define mk_lv2ent_lpage(pa) ((pa >> PG_ENT_SHIFT) | 1)
+#define mk_lv2ent_spage(pa) ((pa >> PG_ENT_SHIFT) | 2)
#define CTRL_ENABLE 0x5
#define CTRL_BLOCK 0x7
@@ -98,14 +104,23 @@ static u32 lv2ent_offset(sysmmu_iova_t iova)
#define CFG_LRU 0x1
#define CFG_QOS(n) ((n & 0xF) << 7)
-#define CFG_MASK 0x0150FFFF /* Selecting bit 0-15, 20, 22 and 24 */
#define CFG_ACGEN (1 << 24) /* System MMU 3.3 only */
#define CFG_SYSSEL (1 << 22) /* System MMU 3.2 only */
#define CFG_FLPDCACHE (1 << 20) /* System MMU 3.2+ only */
+/* common registers */
#define REG_MMU_CTRL 0x000
#define REG_MMU_CFG 0x004
#define REG_MMU_STATUS 0x008
+#define REG_MMU_VERSION 0x034
+
+#define MMU_MAJ_VER(val) ((val) >> 7)
+#define MMU_MIN_VER(val) ((val) & 0x7F)
+#define MMU_RAW_VER(reg) (((reg) >> 21) & ((1 << 11) - 1)) /* 11 bits */
+
+#define MAKE_MMU_VER(maj, min) ((((maj) & 0xF) << 7) | ((min) & 0x7F))
+
+/* v1.x - v3.x registers */
#define REG_MMU_FLUSH 0x00C
#define REG_MMU_FLUSH_ENTRY 0x010
#define REG_PT_BASE_ADDR 0x014
@@ -117,18 +132,14 @@ static u32 lv2ent_offset(sysmmu_iova_t iova)
#define REG_AR_FAULT_ADDR 0x02C
#define REG_DEFAULT_SLAVE_ADDR 0x030
-#define REG_MMU_VERSION 0x034
-
-#define MMU_MAJ_VER(val) ((val) >> 7)
-#define MMU_MIN_VER(val) ((val) & 0x7F)
-#define MMU_RAW_VER(reg) (((reg) >> 21) & ((1 << 11) - 1)) /* 11 bits */
-
-#define MAKE_MMU_VER(maj, min) ((((maj) & 0xF) << 7) | ((min) & 0x7F))
-
-#define REG_PB0_SADDR 0x04C
-#define REG_PB0_EADDR 0x050
-#define REG_PB1_SADDR 0x054
-#define REG_PB1_EADDR 0x058
+/* v5.x registers */
+#define REG_V5_PT_BASE_PFN 0x00C
+#define REG_V5_MMU_FLUSH_ALL 0x010
+#define REG_V5_MMU_FLUSH_ENTRY 0x014
+#define REG_V5_INT_STATUS 0x060
+#define REG_V5_INT_CLEAR 0x064
+#define REG_V5_FAULT_AR_VA 0x070
+#define REG_V5_FAULT_AW_VA 0x080
#define has_sysmmu(dev) (dev->archdata.iommu != NULL)
@@ -169,6 +180,19 @@ static const struct sysmmu_fault_info sysmmu_faults[] = {
{ 7, REG_AW_FAULT_ADDR, "AW ACCESS PROTECTION", IOMMU_FAULT_WRITE },
};
+static const struct sysmmu_fault_info sysmmu_v5_faults[] = {
+ { 0, REG_V5_FAULT_AR_VA, "AR PTW", IOMMU_FAULT_READ },
+ { 1, REG_V5_FAULT_AR_VA, "AR PAGE", IOMMU_FAULT_READ },
+ { 2, REG_V5_FAULT_AR_VA, "AR MULTI-HIT", IOMMU_FAULT_READ },
+ { 3, REG_V5_FAULT_AR_VA, "AR ACCESS PROTECTION", IOMMU_FAULT_READ },
+ { 4, REG_V5_FAULT_AR_VA, "AR SECURITY PROTECTION", IOMMU_FAULT_READ },
+ { 16, REG_V5_FAULT_AW_VA, "AW PTW", IOMMU_FAULT_WRITE },
+ { 17, REG_V5_FAULT_AW_VA, "AW PAGE", IOMMU_FAULT_WRITE },
+ { 18, REG_V5_FAULT_AW_VA, "AW MULTI-HIT", IOMMU_FAULT_WRITE },
+ { 19, REG_V5_FAULT_AW_VA, "AW ACCESS PROTECTION", IOMMU_FAULT_WRITE },
+ { 20, REG_V5_FAULT_AW_VA, "AW SECURITY PROTECTION", IOMMU_FAULT_WRITE },
+};
+
/*
* This structure is attached to dev.archdata.iommu of the master device
* on device add, contains a list of SYSMMU controllers defined by device tree,
@@ -205,6 +229,8 @@ struct sysmmu_drvdata {
struct device *master; /* master device (owner) */
void __iomem *sfrbase; /* our registers */
struct clk *clk; /* SYSMMU's clock */
+ struct clk *aclk; /* SYSMMU's aclk clock */
+ struct clk *pclk; /* SYSMMU's pclk clock */
struct clk *clk_master; /* master's device clock */
int activations; /* number of calls to sysmmu_enable */
spinlock_t lock; /* lock for modyfying state */
@@ -262,7 +288,10 @@ static bool sysmmu_block(struct sysmmu_drvdata *data)
static void __sysmmu_tlb_invalidate(struct sysmmu_drvdata *data)
{
- __raw_writel(0x1, data->sfrbase + REG_MMU_FLUSH);
+ if (MMU_MAJ_VER(data->version) < 5)
+ __raw_writel(0x1, data->sfrbase + REG_MMU_FLUSH);
+ else
+ __raw_writel(0x1, data->sfrbase + REG_V5_MMU_FLUSH_ALL);
}
static void __sysmmu_tlb_invalidate_entry(struct sysmmu_drvdata *data,
@@ -271,15 +300,23 @@ static void __sysmmu_tlb_invalidate_entry(struct sysmmu_drvdata *data,
unsigned int i;
for (i = 0; i < num_inv; i++) {
- __raw_writel((iova & SPAGE_MASK) | 1,
- data->sfrbase + REG_MMU_FLUSH_ENTRY);
+ if (MMU_MAJ_VER(data->version) < 5)
+ __raw_writel((iova & SPAGE_MASK) | 1,
+ data->sfrbase + REG_MMU_FLUSH_ENTRY);
+ else
+ __raw_writel((iova & SPAGE_MASK) | 1,
+ data->sfrbase + REG_V5_MMU_FLUSH_ENTRY);
iova += SPAGE_SIZE;
}
}
static void __sysmmu_set_ptbase(struct sysmmu_drvdata *data, phys_addr_t pgd)
{
- __raw_writel(pgd, data->sfrbase + REG_PT_BASE_ADDR);
+ if (MMU_MAJ_VER(data->version) < 5)
+ __raw_writel(pgd, data->sfrbase + REG_PT_BASE_ADDR);
+ else
+ __raw_writel(pgd >> PAGE_SHIFT,
+ data->sfrbase + REG_V5_PT_BASE_PFN);
__sysmmu_tlb_invalidate(data);
}
@@ -290,6 +327,8 @@ static void __sysmmu_get_version(struct sysmmu_drvdata *data)
clk_enable(data->clk_master);
clk_enable(data->clk);
+ clk_enable(data->pclk);
+ clk_enable(data->aclk);
ver = __raw_readl(data->sfrbase + REG_MMU_VERSION);
@@ -302,6 +341,8 @@ static void __sysmmu_get_version(struct sysmmu_drvdata *data)
dev_dbg(data->sysmmu, "hardware version: %d.%d\n",
MMU_MAJ_VER(data->version), MMU_MIN_VER(data->version));
+ clk_disable(data->aclk);
+ clk_disable(data->pclk);
clk_disable(data->clk);
clk_disable(data->clk_master);
}
@@ -326,19 +367,31 @@ static irqreturn_t exynos_sysmmu_irq(int irq, void *dev_id)
{
/* SYSMMU is in blocked state when interrupt occurred. */
struct sysmmu_drvdata *data = dev_id;
- const struct sysmmu_fault_info *finfo = sysmmu_faults;
- int i, n = ARRAY_SIZE(sysmmu_faults);
- unsigned int itype;
+ const struct sysmmu_fault_info *finfo;
+ unsigned int i, n, itype;
sysmmu_iova_t fault_addr = -1;
+ unsigned short reg_status, reg_clear;
int ret = -ENOSYS;
WARN_ON(!is_sysmmu_active(data));
+ if (MMU_MAJ_VER(data->version) < 5) {
+ reg_status = REG_INT_STATUS;
+ reg_clear = REG_INT_CLEAR;
+ finfo = sysmmu_faults;
+ n = ARRAY_SIZE(sysmmu_faults);
+ } else {
+ reg_status = REG_V5_INT_STATUS;
+ reg_clear = REG_V5_INT_CLEAR;
+ finfo = sysmmu_v5_faults;
+ n = ARRAY_SIZE(sysmmu_v5_faults);
+ }
+
spin_lock(&data->lock);
clk_enable(data->clk_master);
- itype = __ffs(__raw_readl(data->sfrbase + REG_INT_STATUS));
+ itype = __ffs(__raw_readl(data->sfrbase + reg_status));
for (i = 0; i < n; i++, finfo++)
if (finfo->bit == itype)
break;
@@ -355,7 +408,7 @@ static irqreturn_t exynos_sysmmu_irq(int irq, void *dev_id)
/* fault is not recovered by fault handler */
BUG_ON(ret != 0);
- __raw_writel(1 << itype, data->sfrbase + REG_INT_CLEAR);
+ __raw_writel(1 << itype, data->sfrbase + reg_clear);
sysmmu_unblock(data);
@@ -373,6 +426,8 @@ static void __sysmmu_disable_nocount(struct sysmmu_drvdata *data)
__raw_writel(CTRL_DISABLE, data->sfrbase + REG_MMU_CTRL);
__raw_writel(0, data->sfrbase + REG_MMU_CFG);
+ clk_disable(data->aclk);
+ clk_disable(data->pclk);
clk_disable(data->clk);
clk_disable(data->clk_master);
}
@@ -421,6 +476,8 @@ static void __sysmmu_enable_nocount(struct sysmmu_drvdata *data)
{
clk_enable(data->clk_master);
clk_enable(data->clk);
+ clk_enable(data->pclk);
+ clk_enable(data->aclk);
__raw_writel(CTRL_BLOCK, data->sfrbase + REG_MMU_CTRL);
@@ -544,22 +601,47 @@ static int __init exynos_sysmmu_probe(struct platform_device *pdev)
}
data->clk = devm_clk_get(dev, "sysmmu");
- if (IS_ERR(data->clk)) {
- dev_err(dev, "Failed to get clock!\n");
- return PTR_ERR(data->clk);
- } else {
+ if (!IS_ERR(data->clk)) {
ret = clk_prepare(data->clk);
if (ret) {
dev_err(dev, "Failed to prepare clk\n");
return ret;
}
+ } else {
+ data->clk = NULL;
+ }
+
+ data->aclk = devm_clk_get(dev, "aclk");
+ if (!IS_ERR(data->aclk)) {
+ ret = clk_prepare(data->aclk);
+ if (ret) {
+ dev_err(dev, "Failed to prepare aclk\n");
+ return ret;
+ }
+ } else {
+ data->aclk = NULL;
+ }
+
+ data->pclk = devm_clk_get(dev, "pclk");
+ if (!IS_ERR(data->pclk)) {
+ ret = clk_prepare(data->pclk);
+ if (ret) {
+ dev_err(dev, "Failed to prepare pclk\n");
+ return ret;
+ }
+ } else {
+ data->pclk = NULL;
+ }
+
+ if (!data->clk && (!data->aclk || !data->pclk)) {
+ dev_err(dev, "Failed to get device clock(s)!\n");
+ return -ENOSYS;
}
data->clk_master = devm_clk_get(dev, "master");
if (!IS_ERR(data->clk_master)) {
ret = clk_prepare(data->clk_master);
if (ret) {
- clk_unprepare(data->clk);
dev_err(dev, "Failed to prepare master's clk\n");
return ret;
}
@@ -573,6 +655,13 @@ static int __init exynos_sysmmu_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, data);
__sysmmu_get_version(data);
+ if (PG_ENT_SHIFT < 0) {
+ if (MMU_MAJ_VER(data->version) < 5)
+ PG_ENT_SHIFT = SYSMMU_PG_ENT_SHIFT;
+ else
+ PG_ENT_SHIFT = SYSMMU_V5_PG_ENT_SHIFT;
+ }
+
pm_runtime_enable(dev);
return 0;
@@ -637,6 +726,8 @@ static struct iommu_domain *exynos_iommu_domain_alloc(unsigned type)
dma_addr_t handle;
int i;
+ /* Check if correct PTE offsets are initialized */
+ BUG_ON(PG_ENT_SHIFT < 0 || !dma_dev);
domain = kzalloc(sizeof(*domain), GFP_KERNEL);
if (!domain)
@@ -816,7 +907,7 @@ static sysmmu_pte_t *alloc_lv2entry(struct exynos_iommu_domain *domain,
bool need_flush_flpd_cache = lv1ent_zero(sent);
pent = kmem_cache_zalloc(lv2table_kmem_cache, GFP_ATOMIC);
- BUG_ON((unsigned int)pent & (LV2TABLE_SIZE - 1));
+ BUG_ON((phys_addr_t)pent & (LV2TABLE_SIZE - 1));
if (!pent)
return ERR_PTR(-ENOMEM);
--
1.9.2
More information about the linux-arm-kernel
mailing list