[PATCH 3/3] ARM: realview: support all the RealView EB board variants
Linus Walleij
linus.walleij at linaro.org
Thu Feb 18 05:46:51 PST 2016
The ARM RealView Evaluation Baseboards are basically these:
- The original ARMv5 EB board with an ARM926EJ-S, ARM1136 or
ARM1176 core tile here described in arm-realview-eb.dts
no matter which of these core tiles is being used. This
can be emulated by QEMU "realview-eb" machine, which by
default will have the ARM926EJ-S core tile.
- The same board with one of three MPCore Core tiles:
ARM11MPCore, not to be confused with the similar ARM
PB11MPCore ARM11MPCore test system. This exist in
two revisions:
- Revision A modeled in arm-realview-eb-11mp.dts
- Revision B modeled arm-realview-eb-11mp-revb.dts
Revision B can be emulated by the QEMU
"realview-eb-mpcore" machine, but to match the hardware
also the argument -smp cpus=4 must be passed so that
it has four CPU cores, like the hardware.
There is also evidently from the code in the kernel a
Cortex-A9 core tile for the EB, and this is modeled in
arm-realview-eb-a9mp.dts based on the kernel boardfile.
I have not found a user guide for this EB core tile on
the ARM website and it seems uncommon. It is however
included for completeness.
Cc: Arnd Bergmann <arnd at arndb.de>
Cc: Pawel Moll <pawel.moll at arm.com>
Cc: Peter Maydell <peter.maydell at linaro.org>
Cc: Marc Zyngier <marc.zyngier at arm.com>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
arch/arm/boot/dts/Makefile | 6 +-
arch/arm/boot/dts/arm-realview-eb-11mp-revb.dts | 86 +++++
arch/arm/boot/dts/arm-realview-eb-11mp.dts | 74 ++++
arch/arm/boot/dts/arm-realview-eb-a9mp.dts | 70 ++++
arch/arm/boot/dts/arm-realview-eb-mp.dtsi | 224 ++++++++++++
arch/arm/boot/dts/arm-realview-eb.dts | 166 +++++++++
arch/arm/boot/dts/arm-realview-eb.dtsi | 453 ++++++++++++++++++++++++
7 files changed, 1078 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/arm-realview-eb-11mp-revb.dts
create mode 100644 arch/arm/boot/dts/arm-realview-eb-11mp.dts
create mode 100644 arch/arm/boot/dts/arm-realview-eb-a9mp.dts
create mode 100644 arch/arm/boot/dts/arm-realview-eb-mp.dtsi
create mode 100644 arch/arm/boot/dts/arm-realview-eb.dts
create mode 100644 arch/arm/boot/dts/arm-realview-eb.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 76baaa51080c..39deb1741465 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -533,7 +533,11 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8974-sony-xperia-honami.dtb
dtb-$(CONFIG_ARCH_REALVIEW) += \
arm-realview-pb1176.dtb \
- arm-realview-pb11mp.dtb
+ arm-realview-pb11mp.dtb \
+ arm-realview-eb.dtb \
+ arm-realview-eb-11mp.dtb \
+ arm-realview-eb-11mp-revb.dtb \
+ arm-realview-eb-a9mp.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3036-evb.dtb \
rk3036-kylin.dtb \
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-revb.dts b/arch/arm/boot/dts/arm-realview-eb-11mp-revb.dts
new file mode 100644
index 000000000000..02b16e93b9cf
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-11mp-revb.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-11mp.dts"
+
+/ {
+ model = "ARM RealView EB ARM11MPCore Revision B";
+};
+
+&intc {
+ compatible = "arm,eb11mp-revb-gic";
+ reg = <0x10101000 0x1000>,
+ <0x10100100 0x100>;
+};
+
+&L2 {
+ reg = <0x10102000 0x1000>;
+};
+
+&scu {
+ reg = <0x10100000 0x100>;
+};
+
+&twd_timer {
+ reg = <0x10100600 0x20>;
+};
+
+&twd_wdog {
+ reg = <0x10100620 0x20>;
+};
+
+/*
+ * On revision B, we cannot reach the secondary interrupt
+ * controller, as a result, some peripherals that are dependent
+ * on their IRQ cannot be reached, so disable them.
+ */
+&intc_second {
+ status = "disabled";
+};
+
+&gpio0 {
+ status = "disabled";
+};
+
+&gpio1 {
+ status = "disabled";
+};
+
+&gpio2 {
+ status = "disabled";
+};
+
+&serial2 {
+ status = "disabled";
+};
+
+&serial3 {
+ status = "disabled";
+};
+
+&ssp {
+ status = "disabled";
+};
+
+&wdog {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp.dts b/arch/arm/boot/dts/arm-realview-eb-11mp.dts
new file mode 100644
index 000000000000..f2a2ffede0b0
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-11mp.dts
@@ -0,0 +1,74 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-eb-mp.dtsi"
+
+/ {
+ model = "ARM RealView EB ARM11MPCore";
+ arm,hbi = <0x146>;
+
+ /*
+ * This is the ARM11 MPCore tile (HBI-0146) used with the RealView EB.
+ * Reference: ARM DUI 0318F
+ *
+ * To run this machine with QEMU, specify the following:
+ * qemu-system-arm -M realview-eb-mpcore -smp cpus=4
+ */
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "arm,realview-smp";
+
+ MP11_0: cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,arm11mpcore";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ MP11_1: cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,arm11mpcore";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+
+ MP11_2: cpu at 2 {
+ device_type = "cpu";
+ compatible = "arm,arm11mpcore";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ };
+
+ MP11_3: cpu at 3 {
+ device_type = "cpu";
+ compatible = "arm,arm11mpcore";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
+
+&pmu {
+ interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-a9mp.dts b/arch/arm/boot/dts/arm-realview-eb-a9mp.dts
new file mode 100644
index 000000000000..967684b3636c
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-a9mp.dts
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-eb-mp.dtsi"
+
+/ {
+ model = "ARM RealView EB Cortex A9 MPCore";
+
+ /*
+ * This is the Cortex A9 MPCore tile used with the
+ * RealView EB.
+ */
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "arm,realview-smp";
+
+ A9_0: cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ A9_1: cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+
+ A9_2: cpu at 2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ };
+
+ A9_3: cpu at 3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
+
+&pmu {
+ interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi b/arch/arm/boot/dts/arm-realview-eb-mp.dtsi
new file mode 100644
index 000000000000..6e172895c7e5
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-mp.dtsi
@@ -0,0 +1,224 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "arm-realview-eb.dtsi"
+
+/*
+ * This is the common include file for all MPCore variants of the
+ * Evaluation Baseboard, i.e. ARM11MPCore, ARM11MPCore Revision B
+ * and Cortex-A9 MPCore.
+ */
+/ {
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,realview-eb-soc", "simple-bus";
+ regmap = <&syscon>;
+ ranges;
+
+ intc: interrupt-controller at 1f000100 {
+ compatible = "arm,eb11mp-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0x1f001000 0x1000>,
+ <0x1f000100 0x100>;
+ };
+
+ /* Secondary interrupt controller on the FPGA */
+ intc_second: interrupt-controller at 10040000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0x10041000 0x1000>,
+ <0x10040000 0x100>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ L2: l2-cache {
+ compatible = "arm,l220-cache";
+ reg = <0x1f002000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>,
+ <0 30 IRQ_TYPE_LEVEL_HIGH>,
+ <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ cache-unified;
+ cache-level = <2>;
+ /*
+ * Override default cache size, sets and
+ * associativity as these may be erroneously set
+ * up by boot loader(s), probably for safety
+ * since th outer sync operation can cause the
+ * cache to hang unless disabled.
+ */
+ cache-size = <1048576>; // 1MB
+ cache-sets = <4096>;
+ cache-line-size = <32>;
+ arm,shared-override;
+ arm,parity-enable;
+ arm,outer-sync-disable;
+ };
+
+ scu: scu at 1f000000 {
+ compatible = "arm,arm11mp-scu";
+ reg = <0x1f000000 0x100>;
+ };
+
+ twd_timer: timer at 1f000600 {
+ compatible = "arm,arm11mp-twd-timer";
+ reg = <0x1f000600 0x20>;
+ interrupt-parent = <&intc>;
+ interrupts = <1 13 0xf04>;
+ };
+
+ twd_wdog: watchdog at 1f000620 {
+ compatible = "arm,arm11mp-twd-wdt";
+ reg = <0x1f000620 0x20>;
+ interrupt-parent = <&intc>;
+ interrupts = <1 14 0xf04>;
+ };
+
+ /* PMU with one IRQ line per core */
+ pmu: pmu at 0 {
+ compatible = "arm,arm11mpcore-pmu";
+ interrupt-parent = <&intc>;
+ interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+};
+
+/*
+ * This adapts all the peripherals to the interrupt routing
+ * to the GIC on the core tile.
+ */
+
+ðernet {
+ interrupt-parent = <&intc>;
+ interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+ interrupt-parent = <&intc>;
+ interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+ interrupt-parent = <&intc>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+ interrupt-parent = <&intc>;
+ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&charlcd {
+ interrupt-parent = <&intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial0 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+ interrupt-parent = <&intc>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+/*
+ * On revision A, these peripherals does not have their IRQ lines
+ * routed to the core tile, but they can be reached on the secondary
+ * GIC.
+ */
+&gpio0 {
+ interrupt-parent = <&intc_second>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+ interrupt-parent = <&intc_second>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+ interrupt-parent = <&intc_second>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+ interrupt-parent = <&intc_second>;
+ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+};
+
+&serial3 {
+ interrupt-parent = <&intc_second>;
+ interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+};
+
+&ssp {
+ interrupt-parent = <&intc_second>;
+ interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+};
+
+&wdog {
+ interrupt-parent = <&intc_second>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb.dts b/arch/arm/boot/dts/arm-realview-eb.dts
new file mode 100644
index 000000000000..764bc5b7b958
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb.dts
@@ -0,0 +1,166 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "arm-realview-eb.dtsi"
+
+/ {
+ model = "ARM RealView EB";
+ compatible = "arm,realview-eb";
+ arm,hbi = <0x140>;
+
+ /*
+ * This is the core tile with the CPU and GIC etc for the
+ * ARM926EJ-S, ARM1136, ARM1176 that does not have L2 cache
+ * or PMU.
+ *
+ * To run this machine with QEMU, specify the following:
+ * qemu-system-arm -M realview-eb
+ * Unless specified, QEMU will emulate an ARM926EJ-S core tile.
+ * Switches -cpu arm1136 or -cpu arm1176 emulates the other
+ * core tiles.
+ */
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,realview-eb-soc", "simple-bus";
+ regmap = <&syscon>;
+ ranges;
+
+ intc: interrupt-controller at 10040000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0x10041000 0x1000>,
+ <0x10040000 0x100>;
+ };
+ };
+};
+
+/*
+ * This adapts all the peripherals to the interrupt routing
+ * to the GIC on the core tile.
+ */
+
+ðernet {
+ interrupt-parent = <&intc>;
+ interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+ interrupt-parent = <&intc>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+ interrupt-parent = <&intc>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+ interrupt-parent = <&intc>;
+ interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&charlcd {
+ interrupt-parent = <&intc>;
+ interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial0 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial3 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&ssp {
+ interrupt-parent = <&intc>;
+ interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog {
+ interrupt-parent = <&intc>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio0 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+ interrupt-parent = <&intc>;
+ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&clcd {
+ interrupt-parent = <&intc>;
+ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
new file mode 100644
index 000000000000..1c6a040218e3
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -0,0 +1,453 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "arm,realview-eb";
+
+ chosen { };
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ i2c0 = &i2c;
+ };
+
+ memory {
+ /* 128 MiB memory @ 0x0 */
+ reg = <0x00000000 0x08000000>;
+ };
+
+ /* The voltage to the MMC card is hardwired at 3.3V */
+ vmmc: fixedregulator at 0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ veth: fixedregulator at 0 {
+ compatible = "regulator-fixed";
+ regulator-name = "veth";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ xtal24mhz: xtal24mhz at 24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ timclk: timclk at 1M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <24>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ mclk: mclk at 24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ kmiclk: kmiclk at 24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ sspclk: sspclk at 24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ uartclk: uartclk at 24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ wdogclk: wdogclk at 24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ /* FIXME: this actually hangs off the PLL clocks */
+ pclk: pclk at 0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ flash0 at 40000000 {
+ /* 2 * 32MiB NOR Flash memory */
+ compatible = "arm,versatile-flash", "cfi-flash";
+ reg = <0x40000000 0x04000000>;
+ bank-width = <4>;
+ };
+
+ flash1 at 44000000 {
+ /* 2 * 32MiB NOR Flash memory */
+ compatible = "arm,versatile-flash", "cfi-flash";
+ reg = <0x44000000 0x04000000>;
+ bank-width = <4>;
+ };
+
+ /* SMSC 9118 ethernet with PHY and EEPROM */
+ ethernet: ethernet at 4e000000 {
+ compatible = "smsc,lan9118", "smsc,lan9115";
+ reg = <0x4e000000 0x10000>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ vdd33a-supply = <&veth>;
+ vddvario-supply = <&veth>;
+ };
+
+ usb: usb at 4f000000 {
+ compatible = "nxp,usb-isp1761";
+ reg = <0x4f000000 0x20000>;
+ port1-otg;
+ };
+
+ /* These peripherals are inside the FPGA */
+ fpga {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ syscon: syscon at 10000000 {
+ compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd";
+ reg = <0x10000000 0x1000>;
+
+ led at 08.0 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x01>;
+ label = "versatile:0";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ led at 08.1 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x02>;
+ label = "versatile:1";
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+ led at 08.2 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x04>;
+ label = "versatile:2";
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+ led at 08.3 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x08>;
+ label = "versatile:3";
+ default-state = "off";
+ };
+ led at 08.4 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x10>;
+ label = "versatile:4";
+ default-state = "off";
+ };
+ led at 08.5 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x20>;
+ label = "versatile:5";
+ default-state = "off";
+ };
+ led at 08.6 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x40>;
+ label = "versatile:6";
+ default-state = "off";
+ };
+ led at 08.7 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x80>;
+ label = "versatile:7";
+ default-state = "off";
+ };
+ oscclk0: osc0 at 0c {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x0C>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk1: osc1 at 10 {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x10>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk2: osc2 at 14 {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x14>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk3: osc3 at 18 {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x18>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk4: osc4 at 1c {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x1c>;
+ clocks = <&xtal24mhz>;
+ };
+ };
+
+ i2c: i2c at 10002000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "arm,versatile-i2c";
+ reg = <0x10002000 0x1000>;
+
+ rtc at 68 {
+ compatible = "dallas,ds1338";
+ reg = <0x68>;
+ };
+ };
+
+ aaci: aaci at 10004000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x10004000 0x1000>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ mmc: mmcsd at 10005000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x10005000 0x1000>;
+
+ /* Due to frequent FIFO overruns, use just 500 kHz */
+ max-frequency = <500000>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ clocks = <&mclk>, <&pclk>;
+ clock-names = "mclk", "apb_pclk";
+ vmmc-supply = <&vmmc>;
+ cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ kmi0: kmi at 10006000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x10006000 0x1000>;
+ clocks = <&kmiclk>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ kmi1: kmi at 10007000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x10007000 0x1000>;
+ clocks = <&kmiclk>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ charlcd: fpga_charlcd: charlcd at 10008000 {
+ compatible = "arm,versatile-lcd";
+ reg = <0x10008000 0x1000>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ serial0: serial at 10009000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x10009000 0x1000>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ serial1: serial at 1000a000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1000a000 0x1000>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ serial2: serial at 1000b000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1000b000 0x1000>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ serial3: serial at 1000c000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1000c000 0x1000>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ ssp: ssp at 1000d000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x1000d000 0x1000>;
+ clocks = <&sspclk>, <&pclk>;
+ clock-names = "SSPCLK", "apb_pclk";
+ };
+
+ wdog: watchdog at 10010000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x10010000 0x1000>;
+ clocks = <&wdogclk>, <&pclk>;
+ clock-names = "wdogclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ timer01: timer at 10011000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10011000 0x1000>;
+ clocks = <&timclk>, <&timclk>, <&pclk>;
+ clock-names = "timer1", "timer2", "apb_pclk";
+ };
+
+ timer23: timer at 10012000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10012000 0x1000>;
+ clocks = <&timclk>, <&timclk>, <&pclk>;
+ clock-names = "timer1", "timer2", "apb_pclk";
+ };
+
+ gpio0: gpio at 10013000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x10013000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio1: gpio at 10014000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x10014000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio2: gpio at 10015000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x10015000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ rtc: rtc at 10017000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x10017000 0x1000>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ clcd: clcd at 10020000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x10020000 0x1000>;
+ interrupt-names = "combined";
+ clocks = <&oscclk0>, <&pclk>;
+ clock-names = "clcdclk", "apb_pclk";
+
+ port {
+ clcd_pads: endpoint {
+ remote-endpoint = <&clcd_panel>;
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+ };
+ };
+
+ panel {
+ compatible = "panel-dpi";
+
+ port {
+ clcd_panel: endpoint {
+ remote-endpoint = <&clcd_pads>;
+ };
+ };
+
+ /* Standard 640x480 VGA timings */
+ panel-timing {
+ clock-frequency = <25175000>;
+ hactive = <640>;
+ hback-porch = <48>;
+ hfront-porch = <16>;
+ hsync-len = <96>;
+ vactive = <480>;
+ vback-porch = <33>;
+ vfront-porch = <10>;
+ vsync-len = <2>;
+ };
+ };
+ };
+ };
+};
--
2.4.3
More information about the linux-arm-kernel
mailing list