Using i.MX6 quad's IPU#1/DI#1 to drive parallel port #1 failed

[Juergen Borleis]

Hi Lothar,

On Wednesday 17 February 2016 15:58:14 Lothar Waßmann wrote:
> > thank you for your answer. Can you also send me your "pinctrl_disp1"
> > definition, please?
>
> 		pinctrl_disp1: disp1grp {
> 			fsl,pins = <
> 				MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK	0x10
> 				MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15	0x10

The "PIN15" was the key. With your definition it now works here as well.

Thank you for your help.

Regards,
Juergen