[PATCH v8 0/2] Add Rockchip Inno-HDMI driver

[Yakir Yang]

Hi Mark,

Thanks for your apply ;)

- Yakir

On 02/18/2016 02:12 PM, Mark yao wrote:
> On 2016年01月29日 14:42, Yakir Yang wrote:
>> Here are a brief introduction to Innosilicon HDMI IP:
>>    - Support HDMI 1.4a, HDCP 1.2 and DVI 1.0 standard compliant 
>> transmitter
>>    - Support HDMI1.4 a/b 3D function defined in HDMI 1.4 a/b spec
>>    - Digital video interface supports a pixel size of 24, 30, 36, 
>> 48bits color depth in RGB
>>    - S/PDIF output supports PCM, Dolby Digital, DTS digital audio 
>> transmission
>>      (32-192kHz Fs) using IEC60958 and IEC 61937
>>    - The EDID and CEC function are also supported by Innosilicon HDMI 
>> Transmitter Controlle
>>
>> Changes in v8:
>> - Don't check whether encoder output format is RGB colorspace, cause 
>> driver
>>    default configure the output colorspace to RGB. (ZhengYang)
>> - Correct the check condition in inno_hdmi_config_video_csc() 
>> (ZhengYang)
>>      - if (data->enc_out_format == data->enc_out_format) {
>>      + if (data->enc_in_format == data->enc_out_format) {
>>
>> Changes in v7:
>> - Correct the module licnese statement (Paul)
>>       - MODULE_LICENSE("GPL");
>>       + MODULE_LICENSE("GPLv2");
>> - Start indentation with tabs and fix the misspell in Kconfig (Paul)
>> - Carry the lost device-binding document (Heiko)
>>
>> Changes in v6:
>> - Rebase the Makefile/Kconfig files which add by Chris's 
>> rockchip-mipi driver (Caeser)
>>
>> Changes in v5:
>> - Use hdmi_infoframe helper functions to packed the infoframe (Russell)
>> - Remove the unused double wait_for_completion_timeout for ddc 
>> transfer (Russell)
>> - Remove the unused local variable in "inno_hdmi_i2c_write()" 
>> function (Russell)
>>
>> Changes in v4:
>> - Modify the commit title "drm/rockchip: hdmi: ..." (Mark)
>> - Correct the "DKMS" to "DPMS" (Mark)
>> - Fix over 80 characters problems (Mark)
>> - Remove encoder .prepare/.commit helper functions, and move the vop 
>> mode
>> configure function into encoder .enable helper functions. (Mark)
>>
>> Changes in v3:
>> - Use encoder enable/disable function, and remove the encoder DPMS 
>> function
>> - Keep HDMI PLL power on in standby mode
>>
>> Changes in v2:
>> - Using DRM atomic helper functions for connector init (Mark)
>> - Remove "hdmi->connector.encoder = encoder;" (Mark)
>> - Add the Acked-by tags from Rob
>> - Correct the misspell "rk3036-dw-hdmi" (Heiko)
>>
>> Yakir Yang (2):
>>    drm/rockchip: hdmi: add Innosilicon HDMI support
>>    dt-bindings: add document for Innosilicon HDMI on Rockchip platform
>>
>>   .../display/rockchip/inno_hdmi-rockchip.txt        |  50 ++
>>   drivers/gpu/drm/rockchip/Kconfig                   |   8 +
>>   drivers/gpu/drm/rockchip/Makefile                  |   1 +
>>   drivers/gpu/drm/rockchip/inno_hdmi.c               | 939 
>> +++++++++++++++++++++
>>   drivers/gpu/drm/rockchip/inno_hdmi.h               | 362 ++++++++
>>   5 files changed, 1360 insertions(+)
>>   create mode 100644 
>> Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt
>>   create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.c
>>   create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.h
>>
>
> Applied to my branch :-) .
>
> Thanks.
>