[PATCH] ARM: dts: sun4i: Enable USB DRC on Hyundai-a7hd

[Peter Korsgaard]

Enable the OTG USB controller on the A7HD.

Signed-off-by: Peter Korsgaard <peter at korsgaard.com>
---
 arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts | 34 ++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
index 43f58fb..9103864 100644
--- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
@@ -87,6 +87,30 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0_id_detect_pin at 0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin at 0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb2_vbus {
 	gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
 	status = "okay";
@@ -102,7 +126,17 @@
 	allwinner,pins = "PH6";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
 };
-- 
2.1.4