[PATCH v3 2/7] ARM: dts: r8a7790: Add L2 cache-controller nodes
Geert Uytterhoeven
geert+renesas at glider.be
Mon Feb 15 12:38:30 PST 2016
Add device nodes for the L2 caches, and link the CPU nodes to them.
The L2 cache for the Cortex-A15 CPU cores is 2 MiB large (organized as
128 KiB x 16 ways).
The L2 cache for the Cortex-A7 CPU cores is 512 KiB large (organized as
64 KiB x 8 ways).
Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
v3:
- Drop "arm,data-latency" and "arm,tag-latency" properties, as they
may not be valid when using virtualization,
- Change one-line summary prefix to match current arm-soc practices,
v2:
- Drop (incorrect) optional cache-{size,sets,{block,line}-size}
properties, as this information is auto-detected,
- Integrate linking CPUs to L2 caches into this patch,
- Extracted from series "[PATCH/RFC 00/15] ARM: shmobile: R-Car: Add
SYSC PM Domain DT Support".
---
arch/arm/boot/dts/r8a7790.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 76ddf5c6cca79c3c..e40aa6585831c520 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -52,6 +52,7 @@
voltage-tolerance = <1>; /* 1% */
clocks = <&cpg_clocks R8A7790_CLK_Z>;
clock-latency = <300000>; /* 300 us */
+ next-level-cache = <&L2_CA15>;
/* kHz - uV - OPPs unknown yet */
operating-points = <1400000 1000000>,
@@ -67,6 +68,7 @@
compatible = "arm,cortex-a15";
reg = <1>;
clock-frequency = <1300000000>;
+ next-level-cache = <&L2_CA15>;
};
cpu2: cpu at 2 {
@@ -74,6 +76,7 @@
compatible = "arm,cortex-a15";
reg = <2>;
clock-frequency = <1300000000>;
+ next-level-cache = <&L2_CA15>;
};
cpu3: cpu at 3 {
@@ -81,6 +84,7 @@
compatible = "arm,cortex-a15";
reg = <3>;
clock-frequency = <1300000000>;
+ next-level-cache = <&L2_CA15>;
};
cpu4: cpu at 4 {
@@ -88,6 +92,7 @@
compatible = "arm,cortex-a7";
reg = <0x100>;
clock-frequency = <780000000>;
+ next-level-cache = <&L2_CA7>;
};
cpu5: cpu at 5 {
@@ -95,6 +100,7 @@
compatible = "arm,cortex-a7";
reg = <0x101>;
clock-frequency = <780000000>;
+ next-level-cache = <&L2_CA7>;
};
cpu6: cpu at 6 {
@@ -102,6 +108,7 @@
compatible = "arm,cortex-a7";
reg = <0x102>;
clock-frequency = <780000000>;
+ next-level-cache = <&L2_CA7>;
};
cpu7: cpu at 7 {
@@ -109,9 +116,22 @@
compatible = "arm,cortex-a7";
reg = <0x103>;
clock-frequency = <780000000>;
+ next-level-cache = <&L2_CA7>;
};
};
+ L2_CA15: cache-controller at 0 {
+ compatible = "cache";
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ L2_CA7: cache-controller at 1 {
+ compatible = "cache";
+ cache-unified;
+ cache-level = <2>;
+ };
+
gic: interrupt-controller at f1001000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
--
1.9.1
More information about the linux-arm-kernel
mailing list