[PATCH 3/3] ARM: zynq: Use earlycon instead of earlyprintk
Michal Simek
michal.simek at xilinx.com
Mon Feb 15 08:05:19 PST 2016
Use early console instead of earlyprintk which is supposed to use for
very early debugging (DEBUG_LL).
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
arch/arm/boot/dts/zynq-parallella.dts | 2 +-
arch/arm/boot/dts/zynq-zc702.dts | 2 +-
arch/arm/boot/dts/zynq-zc706.dts | 2 +-
arch/arm/boot/dts/zynq-zed.dts | 2 +-
arch/arm/boot/dts/zynq-zybo.dts | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts
index 9efd16cb2859..307ed201d658 100644
--- a/arch/arm/boot/dts/zynq-parallella.dts
+++ b/arch/arm/boot/dts/zynq-parallella.dts
@@ -34,7 +34,7 @@
};
chosen {
- bootargs = "earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
+ bootargs = "earlycon root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
stdout-path = "serial0:115200n8";
};
};
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index cb64209bca08..e96959b2e67a 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -30,7 +30,7 @@
};
chosen {
- bootargs = "earlyprintk";
+ bootargs = "earlycon";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index abf5d238ae04..be6a986bbbd8 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -30,7 +30,7 @@
};
chosen {
- bootargs = "earlyprintk";
+ bootargs = "earlycon";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts
index b9f2522012e8..7250c1eac7f9 100644
--- a/arch/arm/boot/dts/zynq-zed.dts
+++ b/arch/arm/boot/dts/zynq-zed.dts
@@ -29,7 +29,7 @@
};
chosen {
- bootargs = "earlyprintk";
+ bootargs = "earlycon";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts
index 16c9cacd668d..bd992e036aa9 100644
--- a/arch/arm/boot/dts/zynq-zybo.dts
+++ b/arch/arm/boot/dts/zynq-zybo.dts
@@ -29,7 +29,7 @@
};
chosen {
- bootargs = "earlyprintk";
+ bootargs = "earlycon";
stdout-path = "serial0:115200n8";
};
--
1.9.1
More information about the linux-arm-kernel
mailing list