[PATCH 2/3] serial: amba-pl011: complete support to ZTE uart
Jun Nie
jun.nie at linaro.org
Mon Feb 15 04:13:13 PST 2016
Complete support to ZTE uart with adding specific registers
mask.
Signed-off-by: Jun Nie <jun.nie at linaro.org>
---
drivers/tty/serial/amba-pl011.c | 70 ++++++++++++++++++++++++++++++++++-------
include/linux/amba/serial.h | 4 +++
2 files changed, 62 insertions(+), 12 deletions(-)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index f52a243..72ae785 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -97,6 +97,10 @@ struct vendor_data {
const u16 *reg_offset;
const struct uart_ops *uart_pops;
unsigned int ifls;
+ unsigned int fr_busy;
+ unsigned int fr_dsr;
+ unsigned int fr_cts;
+ unsigned int fr_ri;
bool access_32b;
bool oversampling;
bool dma_threshold;
@@ -115,6 +119,10 @@ static unsigned int get_fifosize_arm(struct amba_device *dev)
static struct vendor_data vendor_arm = {
.reg_offset = pl011_std_offsets,
.ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+ .fr_busy = UART01x_FR_BUSY,
+ .fr_dsr = UART01x_FR_DSR,
+ .fr_cts = UART01x_FR_CTS,
+ .fr_ri = UART011_FR_RI,
.oversampling = false,
.dma_threshold = false,
.cts_event_workaround = false,
@@ -130,6 +138,10 @@ static unsigned int get_fifosize_sbsa(struct amba_device *dev)
static struct vendor_data vendor_sbsa = {
.reg_offset = pl011_std_offsets,
+ .fr_busy = UART01x_FR_BUSY,
+ .fr_dsr = UART01x_FR_DSR,
+ .fr_cts = UART01x_FR_CTS,
+ .fr_ri = UART011_FR_RI,
.uart_pops = &sbsa_uart_pops,
.oversampling = false,
.dma_threshold = false,
@@ -174,6 +186,10 @@ static unsigned int get_fifosize_st(struct amba_device *dev)
static struct vendor_data vendor_st = {
.reg_offset = pl011_st_offsets,
.ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
+ .fr_busy = UART01x_FR_BUSY,
+ .fr_dsr = UART01x_FR_DSR,
+ .fr_cts = UART01x_FR_CTS,
+ .fr_ri = UART011_FR_RI,
.oversampling = true,
.dma_threshold = true,
.cts_event_workaround = true,
@@ -198,12 +214,26 @@ static const u16 pl011_zte_offsets[REG_ARRAY_SIZE] = {
[REG_DMACR] = ZX_UART011_DMACR,
};
+static unsigned int get_fifosize_zte(struct amba_device *dev)
+{
+ return 16;
+}
+
static struct vendor_data vendor_zte __maybe_unused = {
.reg_offset = pl011_zte_offsets,
.uart_pops = &amba_pl011_pops,
.access_32b = true,
.ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
- .get_fifosize = get_fifosize_arm,
+ .fr_busy = ZX_UART01x_FR_BUSY,
+ .fr_dsr = ZX_UART01x_FR_DSR,
+ .fr_cts = ZX_UART01x_FR_CTS,
+ .fr_ri = ZX_UART011_FR_RI,
+ .oversampling = false,
+ .dma_threshold = false,
+ .cts_event_workaround = false,
+ .always_enabled = false,
+ .fixed_options = false,
+ .get_fifosize = get_fifosize_zte,
};
/* Deals with DMA transactions */
@@ -248,6 +278,10 @@ struct uart_amba_port {
unsigned int im; /* interrupt mask */
unsigned int old_status;
unsigned int fifosize; /* vendor-specific */
+ unsigned int fr_busy; /* vendor-specific */
+ unsigned int fr_dsr; /* vendor-specific */
+ unsigned int fr_cts; /* vendor-specific */
+ unsigned int fr_ri; /* vendor-specific */
unsigned int old_cr; /* state during shutdown */
bool autorts;
unsigned int fixed_baud; /* vendor-set fixed baud rate */
@@ -1178,7 +1212,7 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap)
return;
/* Disable RX and TX DMA */
- while (pl011_read(uap, REG_FR) & UART01x_FR_BUSY)
+ while (pl011_read(uap, REG_FR) & uap->fr_busy)
cpu_relax();
spin_lock_irq(&uap->port.lock);
@@ -1427,11 +1461,11 @@ static void pl011_modem_status(struct uart_amba_port *uap)
if (delta & UART01x_FR_DCD)
uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD);
- if (delta & UART01x_FR_DSR)
+ if (delta & uap->fr_dsr)
uap->port.icount.dsr++;
- if (delta & UART01x_FR_CTS)
- uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
+ if (delta & uap->fr_cts)
+ uart_handle_cts_change(&uap->port, status & uap->fr_cts);
wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
}
@@ -1504,7 +1538,7 @@ static unsigned int pl011_tx_empty(struct uart_port *port)
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
unsigned int status = pl011_read(uap, REG_FR);
- return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
+ return status & (uap->fr_busy | UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
}
static unsigned int pl011_get_mctrl(struct uart_port *port)
@@ -1519,9 +1553,9 @@ static unsigned int pl011_get_mctrl(struct uart_port *port)
result |= tiocmbit
TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR);
- TIOCMBIT(UART01x_FR_DSR, TIOCM_DSR);
- TIOCMBIT(UART01x_FR_CTS, TIOCM_CTS);
- TIOCMBIT(UART011_FR_RI, TIOCM_RNG);
+ TIOCMBIT(uap->fr_dsr, TIOCM_DSR);
+ TIOCMBIT(uap->fr_cts, TIOCM_CTS);
+ TIOCMBIT(uap->fr_ri, TIOCM_RNG);
#undef TIOCMBIT
return result;
}
@@ -2200,7 +2234,7 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
* Finally, wait for transmitter to become empty
* and restore the TCR
*/
- while (pl011_read(uap, REG_FR) & UART01x_FR_BUSY)
+ while (pl011_read(uap, REG_FR) & uap->fr_busy)
cpu_relax();
if (!uap->vendor->always_enabled)
pl011_write(old_cr, uap, REG_CR);
@@ -2482,8 +2516,12 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
return PTR_ERR(uap->clk);
uap->reg_offset = vendor->reg_offset;
- uap->vendor = vendor;
- uap->fifosize = vendor->get_fifosize(dev);
+ uap->vendor = vendor;
+ uap->fifosize = vendor->get_fifosize(dev);
+ uap->fr_busy = vendor->fr_busy;
+ uap->fr_dsr = vendor->fr_dsr;
+ uap->fr_cts = vendor->fr_cts;
+ uap->fr_ri = vendor->fr_ri;
uap->port.iotype = vendor->access_32b ? UPIO_MEM32 : UPIO_MEM;
uap->port.irq = dev->irq[0];
uap->port.ops = &amba_pl011_pops;
@@ -2568,9 +2606,17 @@ static int pl011_uart_plat_probe(struct platform_device *pdev)
if (!uap)
return -ENOMEM;
+ uap->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(uap->clk))
+ return PTR_ERR(uap->clk);
+
uap->vendor = vendor;
uap->reg_offset = vendor->reg_offset;
uap->fifosize = vendor->get_fifosize(NULL);
+ uap->fr_busy = vendor_sbsa.fr_busy;
+ uap->fr_dsr = vendor_sbsa.fr_dsr;
+ uap->fr_cts = vendor_sbsa.fr_cts;
+ uap->fr_ri = vendor_sbsa.fr_ri;
uap->port.iotype = vendor->access_32b ? UPIO_MEM32 : UPIO_MEM;
uap->port.irq = platform_get_irq(pdev, 0);
uap->port.ops = vendor->uart_pops;
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index d76a19b..750f2ef 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -103,6 +103,10 @@
#define UART01x_FR_DSR 0x002
#define UART01x_FR_CTS 0x001
#define UART01x_FR_TMSK (UART01x_FR_TXFF + UART01x_FR_BUSY)
+#define ZX_UART01x_FR_BUSY 0x300
+#define ZX_UART01x_FR_DSR 0x008
+#define ZX_UART01x_FR_CTS 0x002
+#define ZX_UART011_FR_RI 0x001
#define UART011_CR_CTSEN 0x8000 /* CTS hardware flow control */
#define UART011_CR_RTSEN 0x4000 /* RTS hardware flow control */
--
1.9.1
More information about the linux-arm-kernel
mailing list