[PATCH v2 04/10] regulator: axp20x: Use of_match name as default regulator name

[Chen-Yu Tsai]

Originally the helper macros used uppercase regulator names, which
are primarily used to expand to the regulator ID enum, as the default
names. This is aestheticly unpleasent.

Since the of_match bits are the same, just lowercase, use that as the
default names instead.

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
 drivers/regulator/axp20x-regulator.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 81f25383f2d5..40cd894e4df5 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -39,7 +39,7 @@
 #define AXP_DESC_IO(_family, _id, _match, _supply, _min, _max, _step, _vreg,	\
 		    _vmask, _ereg, _emask, _enable_val, _disable_val)		\
 	[_family##_##_id] = {							\
-		.name		= #_id,						\
+		.name		= (_match),					\
 		.supply_name	= (_supply),					\
 		.of_match	= of_match_ptr(_match),				\
 		.regulators_node = of_match_ptr("regulators"),			\
@@ -61,7 +61,7 @@
 #define AXP_DESC(_family, _id, _match, _supply, _min, _max, _step, _vreg,	\
 		 _vmask, _ereg, _emask) 					\
 	[_family##_##_id] = {							\
-		.name		= #_id,						\
+		.name		= (_match),					\
 		.supply_name	= (_supply),					\
 		.of_match	= of_match_ptr(_match),				\
 		.regulators_node = of_match_ptr("regulators"),			\
@@ -80,7 +80,7 @@
 
 #define AXP_DESC_SW(_family, _id, _match, _supply, _ereg, _emask)		\
 	[_family##_##_id] = {							\
-		.name		= #_id,						\
+		.name		= (_match),					\
 		.supply_name	= (_supply),					\
 		.of_match	= of_match_ptr(_match),				\
 		.regulators_node = of_match_ptr("regulators"),			\
@@ -94,7 +94,7 @@
 
 #define AXP_DESC_FIXED(_family, _id, _match, _supply, _volt)			\
 	[_family##_##_id] = {							\
-		.name		= #_id,						\
+		.name		= (_match),					\
 		.supply_name	= (_supply),					\
 		.of_match	= of_match_ptr(_match),				\
 		.regulators_node = of_match_ptr("regulators"),			\
@@ -109,7 +109,7 @@
 #define AXP_DESC_RANGES(_family, _id, _match, _supply, _ranges, _n_voltages,	\
 			_vreg, _vmask, _ereg, _emask)				\
 	[_family##_##_id] = {							\
-		.name		= #_id,						\
+		.name		= (_match),					\
 		.supply_name	= (_supply),					\
 		.of_match	= of_match_ptr(_match),				\
 		.regulators_node = of_match_ptr("regulators"),			\
-- 
2.7.0