[PATCH v2 2/4] regulator: lp872x: Add enable GPIO pin support

[Kim, Milo]

On 2/6/2016 3:42 AM, Paul Kocialkowski wrote:
> LP872x regulators are made active via the EN pin, which might be hooked to a
> GPIO. This adds support for driving the GPIO high when the driver is in use.
>
> Signed-off-by: Paul Kocialkowski <contact at paulk.fr>
> ---
>   .../devicetree/bindings/regulator/lp872x.txt       |  1 +
>   drivers/regulator/lp872x.c                         | 34 ++++++++++++++++++++++
>   include/linux/regulator/lp872x.h                   |  5 ++++
>   3 files changed, 40 insertions(+)

Acked-by: Milo Kim <milo.kim at ti.com>

Best regards,
Milo