[PATCH 3/3] ARM64: zynqmp: Use 64bit size cell format
Michal Simek
michal.simek at xilinx.com
Thu Feb 11 04:26:28 PST 2016
Use 64bit size cell format instead of 32bit for memory
description. Change 64bit sizes also for all others IPs.
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 63 ++++++++++++++---------------
2 files changed, 32 insertions(+), 33 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
index acb0527fdc4a..358089687a69 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
@@ -29,7 +29,7 @@
memory {
device_type = "memory";
- reg = <0x0 0x0 0x40000000>;
+ reg = <0x0 0x0 0x0 0x40000000>;
};
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index e595f22e7e4b..ef8fe8e6c868 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -14,7 +14,7 @@
/ {
compatible = "xlnx,zynqmp";
#address-cells = <2>;
- #size-cells = <1>;
+ #size-cells = <2>;
cpus {
#address-cells = <1>;
@@ -74,16 +74,15 @@
amba_apu {
compatible = "simple-bus";
#address-cells = <2>;
- #size-cells = <1>;
+ #size-cells = <2>;
ranges;
-
gic: interrupt-controller at f9010000 {
compatible = "arm,gic-400", "arm,cortex-a15-gic";
#interrupt-cells = <3>;
- reg = <0x0 0xf9010000 0x10000>,
- <0x0 0xf902f000 0x2000>,
- <0x0 0xf9040000 0x20000>,
- <0x0 0xf906f000 0x2000>;
+ reg = <0x0 0xf9010000 0x0 0x10000>,
+ <0x0 0xf902f000 0x0 0x2000>,
+ <0x0 0xf9040000 0x0 0x20000>,
+ <0x0 0xf906f000 0x0 0x2000>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <1 9 0xf04>;
@@ -93,14 +92,14 @@
amba: amba {
compatible = "simple-bus";
#address-cells = <2>;
- #size-cells = <1>;
+ #size-cells = <2>;
ranges;
can0: can at ff060000 {
compatible = "xlnx,zynq-can-1.0";
status = "disabled";
clock-names = "can_clk", "pclk";
- reg = <0x0 0xff060000 0x1000>;
+ reg = <0x0 0xff060000 0x0 0x1000>;
interrupts = <0 23 4>;
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
@@ -111,7 +110,7 @@
compatible = "xlnx,zynq-can-1.0";
status = "disabled";
clock-names = "can_clk", "pclk";
- reg = <0x0 0xff070000 0x1000>;
+ reg = <0x0 0xff070000 0x0 0x1000>;
interrupts = <0 24 4>;
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
@@ -123,7 +122,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 57 4>, <0 57 4>;
- reg = <0x0 0xff0b0000 0x1000>;
+ reg = <0x0 0xff0b0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
@@ -134,7 +133,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 59 4>, <0 59 4>;
- reg = <0x0 0xff0c0000 0x1000>;
+ reg = <0x0 0xff0c0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
@@ -145,7 +144,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 61 4>, <0 61 4>;
- reg = <0x0 0xff0d0000 0x1000>;
+ reg = <0x0 0xff0d0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
@@ -156,7 +155,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 63 4>, <0 63 4>;
- reg = <0x0 0xff0e0000 0x1000>;
+ reg = <0x0 0xff0e0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
@@ -170,7 +169,7 @@
interrupts = <0 16 4>;
interrupt-controller;
#interrupt-cells = <2>;
- reg = <0x0 0xff0a0000 0x1000>;
+ reg = <0x0 0xff0a0000 0x0 0x1000>;
};
i2c0: i2c at ff020000 {
@@ -178,7 +177,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 17 4>;
- reg = <0x0 0xff020000 0x1000>;
+ reg = <0x0 0xff020000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
};
@@ -188,7 +187,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 18 4>;
- reg = <0x0 0xff030000 0x1000>;
+ reg = <0x0 0xff030000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
};
@@ -196,7 +195,7 @@
sata: ahci at fd0c0000 {
compatible = "ceva,ahci-1v84";
status = "disabled";
- reg = <0x0 0xfd0c0000 0x2000>;
+ reg = <0x0 0xfd0c0000 0x0 0x2000>;
interrupt-parent = <&gic>;
interrupts = <0 133 4>;
};
@@ -206,7 +205,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 48 4>;
- reg = <0x0 0xff160000 0x1000>;
+ reg = <0x0 0xff160000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
};
@@ -215,13 +214,13 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 49 4>;
- reg = <0x0 0xff170000 0x1000>;
+ reg = <0x0 0xff170000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
};
smmu: smmu at fd800000 {
compatible = "arm,mmu-500";
- reg = <0x0 0xfd800000 0x20000>;
+ reg = <0x0 0xfd800000 0x0 0x20000>;
#global-interrupts = <1>;
interrupt-parent = <&gic>;
interrupts = <0 157 4>,
@@ -236,7 +235,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 19 4>;
- reg = <0x0 0xff040000 0x1000>;
+ reg = <0x0 0xff040000 0x0 0x1000>;
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
#size-cells = <0>;
@@ -247,7 +246,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 20 4>;
- reg = <0x0 0xff050000 0x1000>;
+ reg = <0x0 0xff050000 0x0 0x1000>;
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
#size-cells = <0>;
@@ -258,7 +257,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
- reg = <0x0 0xff110000 0x1000>;
+ reg = <0x0 0xff110000 0x0 0x1000>;
timer-width = <32>;
};
@@ -267,7 +266,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
- reg = <0x0 0xff120000 0x1000>;
+ reg = <0x0 0xff120000 0x0 0x1000>;
timer-width = <32>;
};
@@ -276,7 +275,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
- reg = <0x0 0xff130000 0x1000>;
+ reg = <0x0 0xff130000 0x0 0x1000>;
timer-width = <32>;
};
@@ -285,7 +284,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
- reg = <0x0 0xff140000 0x1000>;
+ reg = <0x0 0xff140000 0x0 0x1000>;
timer-width = <32>;
};
@@ -294,7 +293,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 21 4>;
- reg = <0x0 0xff000000 0x1000>;
+ reg = <0x0 0xff000000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
};
@@ -303,7 +302,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 22 4>;
- reg = <0x0 0xff010000 0x1000>;
+ reg = <0x0 0xff010000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
};
@@ -312,7 +311,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 65 4>;
- reg = <0x0 0xfe200000 0x40000>;
+ reg = <0x0 0xfe200000 0x0 0x40000>;
clock-names = "clk_xin", "clk_ahb";
};
@@ -321,7 +320,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 70 4>;
- reg = <0x0 0xfe300000 0x40000>;
+ reg = <0x0 0xfe300000 0x0 0x40000>;
clock-names = "clk_xin", "clk_ahb";
};
@@ -330,7 +329,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 52 1>;
- reg = <0x0 0xfd4d0000 0x1000>;
+ reg = <0x0 0xfd4d0000 0x0 0x1000>;
timeout-sec = <10>;
};
};
--
1.9.1
More information about the linux-arm-kernel
mailing list