[PATCH] ARM: dts: Move syscon reboot/poweroff to common dtsi for Exynos

Javier Martinez Canillas javier at osg.samsung.com
Tue Feb 9 10:30:05 PST 2016


All Exynos SoCs have the same syscon reboot and poweroff device nodes so
there is no need to duplicate the same on each SoC dtsi and can be moved
to a common dtsi that can be included by all the SoCs dtsi files.

Signed-off-by: Javier Martinez Canillas <javier at osg.samsung.com>

---
Hello,

The patch was tested on an Exynos5800 Peach Pi Chromebook and an
Exynos5422 Odroid XU4 board. Reboot and poweroff worked for both.

But testing on Exynos3 and Exynos4 will be highly appreciated.

Best regards,
Javier

 arch/arm/boot/dts/exynos-syscon-restart.dtsi | 23 +++++++++++++++++++++++
 arch/arm/boot/dts/exynos3250.dtsi            | 15 +--------------
 arch/arm/boot/dts/exynos4.dtsi               | 15 +--------------
 arch/arm/boot/dts/exynos5.dtsi               | 15 +--------------
 arch/arm/boot/dts/exynos5410.dtsi            | 15 +--------------
 5 files changed, 27 insertions(+), 56 deletions(-)
 create mode 100644 arch/arm/boot/dts/exynos-syscon-restart.dtsi

diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
new file mode 100644
index 000000000000..2b8acf554881
--- /dev/null
+++ b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
@@ -0,0 +1,23 @@
+/*
+ * Samsung's Exynos SoC syscon reboot/poweroff nodes common definition.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	poweroff: syscon-poweroff {
+		compatible = "syscon-poweroff";
+		regmap = <&pmu_system_controller>;
+		offset = <0x330C>; /* PS_HOLD_CONTROL */
+		mask = <0x5200>; /* reset value */
+	};
+
+	reboot: syscon-reboot {
+		compatible = "syscon-reboot";
+		regmap = <&pmu_system_controller>;
+		offset = <0x0400>; /* SWRESET */
+		mask = <0x1>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 18e3deffbf48..d9c221517935 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -19,6 +19,7 @@
 
 #include "skeleton.dtsi"
 #include "exynos4-cpu-thermal.dtsi"
+#include "exynos-syscon-restart.dtsi"
 #include <dt-bindings/clock/exynos3250.h>
 
 / {
@@ -152,20 +153,6 @@
 			interrupt-parent = <&gic>;
 		};
 
-		poweroff: syscon-poweroff {
-			compatible = "syscon-poweroff";
-			regmap = <&pmu_system_controller>;
-			offset = <0x330C>; /* PS_HOLD_CONTROL */
-			mask = <0x5200>; /* Reset value */
-		};
-
-		reboot: syscon-reboot {
-			compatible = "syscon-reboot";
-			regmap = <&pmu_system_controller>;
-			offset = <0x0400>; /* SWRESET */
-			mask = <0x1>;
-		};
-
 		mipi_phy: video-phy at 10020710 {
 			compatible = "samsung,s5pv210-mipi-video-phy";
 			#phy-cells = <1>;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index ca621a92319e..e6f6939ccdfa 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -21,6 +21,7 @@
 
 #include <dt-bindings/clock/exynos4.h>
 #include <dt-bindings/clock/exynos-audss-clk.h>
+#include "exynos-syscon-restart.dtsi"
 #include "skeleton.dtsi"
 
 / {
@@ -163,20 +164,6 @@
 		interrupt-parent = <&gic>;
 	};
 
-	poweroff: syscon-poweroff {
-		compatible = "syscon-poweroff";
-		regmap = <&pmu_system_controller>;
-		offset = <0x330C>; /* PS_HOLD_CONTROL */
-		mask = <0x5200>; /* reset value */
-	};
-
-	reboot: syscon-reboot {
-		compatible = "syscon-reboot";
-		regmap = <&pmu_system_controller>;
-		offset = <0x0400>; /* SWRESET */
-		mask = <0x1>;
-	};
-
 	dsi_0: dsi at 11C80000 {
 		compatible = "samsung,exynos4210-mipi-dsi";
 		reg = <0x11C80000 0x10000>;
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index b61d1f637510..92313cac035e 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -14,6 +14,7 @@
  */
 
 #include "skeleton.dtsi"
+#include "exynos-syscon-restart.dtsi"
 
 / {
 	interrupt-parent = <&gic>;
@@ -93,20 +94,6 @@
 		status = "disabled";
 	};
 
-	poweroff: syscon-poweroff {
-		compatible = "syscon-poweroff";
-		regmap = <&pmu_system_controller>;
-		offset = <0x330C>; /* PS_HOLD_CONTROL */
-		mask = <0x5200>; /* reset value */
-	};
-
-	reboot: syscon-reboot {
-		compatible = "syscon-reboot";
-		regmap = <&pmu_system_controller>;
-		offset = <0x0400>; /* SWRESET */
-		mask = <0x1>;
-	};
-
 	fimd: fimd at 14400000 {
 		compatible = "samsung,exynos5250-fimd";
 		interrupt-parent = <&combiner>;
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index f3490f567344..fa558674ac76 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -14,6 +14,7 @@
  */
 
 #include "skeleton.dtsi"
+#include "exynos-syscon-restart.dtsi"
 #include <dt-bindings/clock/exynos5410.h>
 
 / {
@@ -117,20 +118,6 @@
 			reg = <0x10040000 0x5000>;
 		};
 
-		poweroff: syscon-poweroff {
-			compatible = "syscon-poweroff";
-			regmap = <&pmu_system_controller>;
-			offset = <0x330C>; /* PS_HOLD_CONTROL */
-			mask = <0x5200>; /* reset value */
-		};
-
-		reboot: syscon-reboot {
-			compatible = "syscon-reboot";
-			regmap = <&pmu_system_controller>;
-			offset = <0x0400>; /* SWRESET */
-			mask = <0x1>;
-		};
-
 		mct: mct at 101C0000 {
 			compatible = "samsung,exynos4210-mct";
 			reg = <0x101C0000 0xB00>;
-- 
2.5.0




More information about the linux-arm-kernel mailing list