[PATCH v5 3/3] pci, pci-thunder-ecam: Add driver for ThunderX-pass1 on-chip devices

David Daney ddaney at caviumnetworks.com
Mon Feb 8 15:31:54 PST 2016


On 02/08/2016 03:24 PM, Bjorn Helgaas wrote:
> On Mon, Feb 08, 2016 at 02:41:41PM -0800, David Daney wrote:
>> On 02/08/2016 02:12 PM, Bjorn Helgaas wrote:
>>> On Mon, Feb 08, 2016 at 01:39:21PM -0800, David Daney wrote:
>>>> On 02/08/2016 01:12 PM, Rob Herring wrote:
>>>>> On Mon, Feb 8, 2016 at 2:47 PM, David Daney <ddaney at caviumnetworks.com> wrote:
>>>>>> On 02/08/2016 11:56 AM, Rob Herring wrote:
>>>>>>> On Fri, Feb 05, 2016 at 03:41:15PM -0800, David Daney wrote:
>>>>>>>> From: David Daney <david.daney at cavium.com>
>>>>>>>> +Properties of the host controller node that differ from
>>>>>>>> +host-generic-pci.txt:
>>>>>>>> +
>>>>>>>> +- compatible     : Must be "cavium,pci-host-thunder-ecam"
>>>>>>>> +
>>>>>>>> +Example:
>>>>>>>> +
>>>>>>>> +       pci at 84b0,00000000 {
>> ...
>>>>>>> and the node name should be "pcie".
>>>>>>
>>>>>> Why pcie?
>>>>>>
>>>>>> There are no PCIe devices or buses reachable from this type of root complex.
>>>>>> There are however many PCI devices.
>> ...
>
>>>> Really, it is a bit of a gray area here as we don't have any bridges
>>>> to PCIe buses and there are multiple devices residing on each bus,
>>>> so from that point of view it cannot be PCIe.  There are, however,
>>>> devices that implement the PCI Express Capability structure, so does
>>>> that make it PCIe?  It is not clear what the specifications demand
>>>> here.
>>>
>>> The PCI core doesn't care about the node name in the device tree.  But
>>> it *does* care about some details of PCI/PCIe topology.  We consider
>>> anything with a PCIe capability to be PCIe.  For example,
>>>
>>>    - pci_cfg_space_size() thinks PCIe devices have 4K of config space
>>>
>>>    - only_one_child() thinks a PCIe bus, i.e., a link, only has a
>>>      single device on it
>>>
>>>    - a PCIe device should have a PCIe Root Port or PCIe Downstream Port
>>>      upstream from it (we did remove some of these restrictions with
>>>      b35b1df5e6c2 ("PCI: Tolerate hierarchies with no Root Port"), but
>>>      it's possible we didn't get them all)
>>>
>>> I assume your system conforms to expectations like these; I'm just
>>> pointing them out because you mentioned buses with multiple devices on
>>> them, which is definitely something one doesn't expect in PCIe.
>>
>> The topology we have is currently working with the kernel's core PCI
>> code.  I don't really want to get into discussing what the
>> definition of PCIe is.  We have multiple devices (more than 32) on a
>> single bus, and they have PCI Express and ARI Capabilities.  Is that
>> PCIe?  I don't know.
>
> I don't need to know the details of your topology.  As long as it
> conforms to the PCIe spec, it should be fine.  If it *doesn't* conform
> to the spec, but things currently seem to work, that's less fine,
> because a future Linux change is liable to break something for you.
>
> I was a little concerned about your statement that "there are multiple
> devices residing on each bus, so from that point of view it cannot be
> PCIe."  That made it sound like you're doing something outside the
> spec.  If you're just using regular multi-function devices or ARI,
> then I don't see any issue (or any reason to say it can't be PCIe).

OK, I will make it "pcie at ...."

Really, ARI is the only reason.  But since ARI is defined in the PCI 
Express specification, pcie it is.

I will send revised patches today.


David Daney

>
> Bjorn
>




More information about the linux-arm-kernel mailing list