[PATCH 1/1] imx25: Fix LCD pixelclock configuration

[Carlos Soto]

2016-01-28 7:32 GMT+01:00 Shawn Guo <shawnguo at kernel.org>:
> On Wed, Dec 23, 2015 at 09:30:10PM +0100, Carlos Soto wrote:
>> Set LCDC base clock (per_7) parent clock to UPLL clock.
>> This is needed to allow finer resolution in pixelclock
>>
>> Signed-off-by: Carlos Soto <csotoalonso at gmail.com>
>> ---
>>  drivers/clk/imx/clk-imx25.c |    6 ++++++
>>  1 file changed, 6 insertions(+)
>>
>> diff --git a/drivers/clk/imx/clk-imx25.c b/drivers/clk/imx/clk-imx25.c
>> index c4c141c..656340e 100644
>> --- a/drivers/clk/imx/clk-imx25.c
>> +++ b/drivers/clk/imx/clk-imx25.c
>> @@ -238,6 +238,12 @@ static int __init __mx25_clocks_init(unsigned long osc_rate,
>>       clk_set_parent(clk[per5_sel], clk[ahb]);
>>
>>       /*
>> +      * set LCDC base clock (per 7) to highest possible frequency (UPLL)
>> +      * to get best resolution for pixel clock
>> +      */
>> +     clk_set_parent(clk[per7_sel], clk[upll]);
>
> This can be done in device tree via assigned-clock-parents without the
> need of touching kernel.
>
> Shawn
>

Sorry, I was not aware of this feature. Already tested and it works fine via DT

Thanks for the help

Carlos