[PATCH 3/3] ARM: dts: orion5x: add device tree for buffalo linkstation ls-gl

[Andrew Lunn]

On Sat, Feb 06, 2016 at 01:33:18AM +0900, Roger Shimizu wrote:
> Add dts file to support Buffalo Linkstation LS-GL
> (a.k.a Buffalo Linkstation Pro/Live), which is marvell orion5x based
> 3.5" HDD NAS.
> 
> Product info:
>   - (JPN) http://buffalo.jp/products/catalog/item/l/ls-gl/
>   - (ENG) http://www.buffalotech.com/products/network-storage/linkstation/linkstation-pro
> 
> This device tree is based on the board file:
>   arch/arm/mach-orion5x/kurobox_pro-setup.c
> However, that board file also support Kurobox Pro, which is not supported by
> device tree yet. So the board file is not removed.
> 
> Signed-off-by: Roger Shimizu <rogershimizu at gmail.com>

Reviewed-by: Andrew Lunn <andrew at lunn.ch>

Thanks
	Andrew

> ---
>  arch/arm/boot/dts/Makefile                     |  1 +
>  arch/arm/boot/dts/orion5x-linkstation-lsgl.dts | 87 ++++++++++++++++++++++++++
>  2 files changed, 88 insertions(+)
>  create mode 100644 arch/arm/boot/dts/orion5x-linkstation-lsgl.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 68625754f398..15a52c1be78a 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -496,6 +496,7 @@ dtb-$(CONFIG_SOC_DRA7XX) += \
>  dtb-$(CONFIG_ARCH_ORION5X) += \
>  	orion5x-lacie-d2-network.dtb \
>  	orion5x-lacie-ethernet-disk-mini-v2.dtb \
> +	orion5x-linkstation-lsgl.dtb \
>  	orion5x-linkstation-lswtgl.dtb \
>  	orion5x-lswsgl.dtb \
>  	orion5x-maxtor-shared-storage-2.dtb \
> diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts
> new file mode 100644
> index 000000000000..1cf644bfd7ea
> --- /dev/null
> +++ b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts
> @@ -0,0 +1,87 @@
> +/*
> + * Device Tree file for Buffalo Linkstation LS-GL
> + *       (also known as Buffalo Linkstation Pro/Live)
> + *
> + * Copyright (C) 2016
> + * Roger Shimizu <rogershimizu at gmail.com>
> + *
> + * Based on the board file arch/arm/mach-orion5x/kurobox_pro-setup.c
> + * Copyright (C) Ronen Shitrit <rshitrit at marvell.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "orion5x-linkstation.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +	model = "Buffalo Linkstation Pro/Live";
> +	compatible = "buffalo,lsgl", "marvell,orion5x-88f5182", "marvell,orion5x";
> +
> +	memory { /* 128 MB */
> +		device_type = "memory";
> +		reg = <0x00000000 0x8000000>;
> +	};
> +};
> +
> +&pinctrl {
> +	pmx_power_hdd: pmx-power-hdd {
> +		marvell,pins = "mpp1";
> +		marvell,function = "gpio";
> +	};
> +
> +	pmx_power_usb: pmx-power-usb {
> +		marvell,pins = "mpp9";
> +		marvell,function = "gpio";
> +	};
> +};
> +
> +&hdd_power {
> +	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&usb_power {
> +	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&ehci1 {
> +	status = "okay";
> +};
> -- 
> 2.1.4
>