[PATCH 2/3] ARM: dts: orion5x: split linkstation lswtgl into common and device parts
Roger Shimizu
rogershimizu at gmail.com
Fri Feb 5 08:33:17 PST 2016
In order to support more linkstation devices, common part of current
.dts file goes into .dtsi file. Some .dtsi are not with "orion5x" prefix
because other kirkwood based linkstation devices are in this shape, and
will be migrated some time later.
- orion5x-linkstation.dtsi
- linkstation-gpio-simple.dtsi
- linkstation-fan.dtsi
while all rest part remains in device specific .dts file:
- orion5x-linkstation-lswtgl.dts
Signed-off-by: Roger Shimizu <rogershimizu at gmail.com>
---
arch/arm/boot/dts/linkstation-fan.dtsi | 72 +++++++
arch/arm/boot/dts/linkstation-gpio-simple.dtsi | 105 ++++++++++
arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts | 243 +++++------------------
arch/arm/boot/dts/orion5x-linkstation.dtsi | 180 +++++++++++++++++
4 files changed, 402 insertions(+), 198 deletions(-)
create mode 100644 arch/arm/boot/dts/linkstation-fan.dtsi
create mode 100644 arch/arm/boot/dts/linkstation-gpio-simple.dtsi
create mode 100644 arch/arm/boot/dts/orion5x-linkstation.dtsi
diff --git a/arch/arm/boot/dts/linkstation-fan.dtsi b/arch/arm/boot/dts/linkstation-fan.dtsi
new file mode 100644
index 000000000000..e211a3c47a76
--- /dev/null
+++ b/arch/arm/boot/dts/linkstation-fan.dtsi
@@ -0,0 +1,72 @@
+/*
+ * Device Tree common file for gpio-fan on Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu at gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ gpio_fan {
+ compatible = "gpio-fan";
+ pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+ pinctrl-names = "default";
+
+ gpio-fan,speed-map =
+ <0 3
+ 1500 2
+ 3250 1
+ 5000 0>;
+ };
+};
+
+&pinctrl {
+ pmx_fan_low: pmx-fan-low {
+ marvell,function = "gpio";
+ };
+
+ pmx_fan_high: pmx-fan-high {
+ marvell,function = "gpio";
+ };
+
+ pmx_fan_lock: pmx-fan-lock {
+ marvell,function = "gpio";
+ };
+};
diff --git a/arch/arm/boot/dts/linkstation-gpio-simple.dtsi b/arch/arm/boot/dts/linkstation-gpio-simple.dtsi
new file mode 100644
index 000000000000..68d75e79a360
--- /dev/null
+++ b/arch/arm/boot/dts/linkstation-gpio-simple.dtsi
@@ -0,0 +1,105 @@
+/*
+ * Device Tree common file for gpio-{keys,leds} on Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu at gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_power_switch>;
+ pinctrl-names = "default";
+
+ power-on-switch {
+ label = "Power-on Switch";
+ linux,code = <KEY_RESERVED>;
+ linux,input-type = <5>;
+ };
+
+ power-auto-switch {
+ label = "Power-auto Switch";
+ linux,code = <KEY_ESC>;
+ linux,input-type = <5>;
+ };
+ };
+
+ gpio_leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info>;
+ pinctrl-names = "default";
+
+ blue-power-led {
+ label = "linkstation:blue:power";
+ default-state = "keep";
+ };
+
+ red-alarm-led {
+ label = "linkstation:red:alarm";
+ };
+
+ amber-info-led {
+ label = "linkstation:amber:info";
+ };
+ };
+};
+
+&pinctrl {
+ pmx_power_switch: pmx-power-switch {
+ marvell,function = "gpio";
+ };
+
+ pmx_led_power: pmx-leds {
+ marvell,function = "gpio";
+ };
+
+ pmx_led_alarm: pmx-leds {
+ marvell,function = "gpio";
+ };
+
+ pmx_led_info: pmx-leds {
+ marvell,function = "gpio";
+ };
+};
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
index aae8a7aceab7..60dbac41c525 100644
--- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
+++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
@@ -45,9 +45,10 @@
/dts-v1/;
+#include "orion5x-linkstation.dtsi"
+#include "linkstation-gpio-simple.dtsi"
+#include "linkstation-fan.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "orion5x-mv88f5182.dtsi"
/ {
model = "Buffalo Linkstation LS-WTGL";
@@ -58,247 +59,93 @@
reg = <0x00000000 0x4000000>;
};
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- linux,stdout-path = &uart0;
- };
-
- soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
- <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
- <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
-
- internal-regs {
- pinctrl: pinctrl at 10000 {
- pinctrl-names = "default";
-
- pmx_led_power: pmx-leds {
- marvell,pins = "mpp0";
- marvell,function = "gpio";
- };
-
- pmx_led_alarm: pmx-leds {
- marvell,pins = "mpp2";
- marvell,function = "gpio";
- };
-
- pmx_led_info: pmx-leds {
- marvell,pins = "mpp3";
- marvell,function = "gpio";
- };
-
- pmx_power_hdd: pmx-power-hdd {
- marvell,pins = "mpp1";
- marvell,function = "gpio";
- };
-
- pmx_usb_power: pmx-usb-power {
- marvell,pins = "mpp9";
- marvell,function = "gpio";
- };
-
- pmx_sata0: pmx-sata0 {
- marvell,pins = "mpp12";
- marvell,function = "sata0";
- };
-
- pmx_sata1: pmx-sata1 {
- marvell,pins = "mpp13";
- marvell,function = "sata1";
- };
-
- pmx_fan_high: pmx-fan-high {
- marvell,pins = "mpp14";
- marvell,function = "gpio";
- };
-
- pmx_fan_low: pmx-fan-low {
- marvell,pins = "mpp17";
- marvell,function = "gpio";
- };
-
- pmx_fan_lock: pmx-fan-lock {
- marvell,pins = "mpp6";
- marvell,function = "gpio";
- };
-
- pmx_power_switch: pmx-power-switch {
- marvell,pins = "mpp8", "mpp10";
- marvell,function = "gpio";
- };
- };
- };
- };
-
gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_power_switch>;
- pinctrl-names = "default";
-
- button at 1 {
- label = "Power-on Switch";
- linux,code = <KEY_RESERVED>;
- linux,input-type = <5>;
+ power-on-switch {
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
- button at 2 {
- label = "Power-auto Switch";
- linux,code = <KEY_ESC>;
- linux,input-type = <5>;
+ power-auto-switch {
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
};
gpio_leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_led_power &pmx_led_alarm
- &pmx_led_info>;
- pinctrl-names = "default";
-
- led at 1 {
- label = "lswtgl:blue:power";
+ blue-power-led {
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- default-state = "keep";
};
- led at 2 {
- label = "lswtgl:red:alarm";
+ red-alarm-led {
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
};
- led at 3 {
- label = "lswtgl:amber:info";
+ amber-info-led {
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
};
};
gpio_fan {
- compatible = "gpio-fan";
- pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
- pinctrl-names = "default";
-
gpios = <&gpio0 14 GPIO_ACTIVE_LOW
&gpio0 17 GPIO_ACTIVE_LOW>;
- gpio-fan,speed-map = <0 3
- 1500 2
- 3250 1
- 5000 0>;
-
alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
+};
- restart_poweroff {
- compatible = "restart-poweroff";
+&pinctrl {
+ pmx_led_power: pmx-leds {
+ marvell,pins = "mpp0";
+ marvell,function = "gpio";
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_power_hdd &pmx_usb_power>;
- pinctrl-names = "default";
-
- usb_power: regulator at 1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
- };
-
- hdd_power: regulator at 2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "HDD Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
- };
+ pmx_power_hdd: pmx-power-hdd {
+ marvell,pins = "mpp1";
+ marvell,function = "gpio";
};
-};
-
-&devbus_bootcs {
- status = "okay";
- devbus,keep-config;
- flash at 0 {
- compatible = "jedec-flash";
- reg = <0 0x40000>;
- bank-width = <1>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- header at 0 {
- reg = <0 0x30000>;
- read-only;
- };
-
- uboot at 30000 {
- reg = <0x30000 0xF000>;
- read-only;
- };
+ pmx_led_alarm: pmx-leds {
+ marvell,pins = "mpp2";
+ marvell,function = "gpio";
+ };
- uboot_env at 3F000 {
- reg = <0x3F000 0x1000>;
- };
- };
+ pmx_led_info: pmx-leds {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
};
-};
-&mdio {
- status = "okay";
+ pmx_fan_lock: pmx-fan-lock {
+ marvell,pins = "mpp6";
+ marvell,function = "gpio";
+ };
- ethphy: ethernet-phy {
- reg = <8>;
+ pmx_power_switch: pmx-power-switch {
+ marvell,pins = "mpp8", "mpp10";
+ marvell,function = "gpio";
};
-};
-ð {
- status = "okay";
+ pmx_power_usb: pmx-power-usb {
+ marvell,pins = "mpp9";
+ marvell,function = "gpio";
+ };
- ethernet-port at 0 {
- phy-handle = <ðphy>;
+ pmx_fan_high: pmx-fan-high {
+ marvell,pins = "mpp14";
+ marvell,function = "gpio";
};
-};
-&ehci0 {
- status = "okay";
+ pmx_fan_low: pmx-fan-low {
+ marvell,pins = "mpp17";
+ marvell,function = "gpio";
+ };
};
-&i2c {
- status = "okay";
-
- rtc {
- compatible = "ricoh,rs5c372a";
- reg = <0x32>;
- };
+&hdd_power {
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
};
-&wdt {
- status = "disabled";
+&usb_power {
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
};
&sata {
- pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
- pinctrl-names = "default";
- status = "okay";
nr-ports = <2>;
};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/orion5x-linkstation.dtsi
new file mode 100644
index 000000000000..ed456ab35fd8
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-linkstation.dtsi
@@ -0,0 +1,180 @@
+/*
+ * Device Tree common file for orion5x based Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu at gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ linux,stdout-path = &uart0;
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+ <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+ <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
+ };
+
+ restart_poweroff {
+ compatible = "restart-poweroff";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_power_usb &pmx_power_hdd>;
+ pinctrl-names = "default";
+
+ usb_power: regulator at 1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ hdd_power: regulator at 2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "HDD Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+};
+
+&pinctrl {
+ pmx_power_hdd: pmx-power-hdd {
+ marvell,function = "gpio";
+ };
+
+ pmx_power_usb: pmx-power-usb {
+ marvell,function = "gpio";
+ };
+};
+
+&devbus_bootcs {
+ status = "okay";
+ devbus,keep-config;
+
+ flash at 0 {
+ compatible = "jedec-flash";
+ reg = <0 0x40000>;
+ bank-width = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ header at 0 {
+ reg = <0 0x30000>;
+ read-only;
+ };
+
+ uboot at 30000 {
+ reg = <0x30000 0xF000>;
+ read-only;
+ };
+
+ uboot_env at 3F000 {
+ reg = <0x3F000 0x1000>;
+ };
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy: ethernet-phy {
+ reg = <8>;
+ };
+};
+
+ð {
+ status = "okay";
+
+ ethernet-port at 0 {
+ phy-handle = <ðphy>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c {
+ status = "okay";
+
+ rtc {
+ compatible = "ricoh,rs5c372a";
+ reg = <0x32>;
+ };
+};
+
+&wdt {
+ status = "disabled";
+};
+
+&sata {
+ status = "okay";
+ nr-ports = <1>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
--
2.1.4
More information about the linux-arm-kernel
mailing list