[PATCH v3 5/5] pinctrl: sunxi: Use pin number when calling sunxi_pmx_set

[Maxime Ripard]

On Thu, Feb 04, 2016 at 12:33:50AM +0100, Krzysztof Adamski wrote:
> sunxi_pmx_set accepts pin number and then calculates offset by
> subtracting pin_base from it. sunxi_pinctrl_gpio_get, on the other hand,
> gets offset so we have to convert it to pin number so we won't get
> negative value in sunxi_pmx_set.
> 
> This was only used on A10 so far, where there is only one GPIO chip with
> pin_base set to 0 so it didn't matter. However H3 also requires this
> workaround but have two pinmux sections, triggering problem for PL port.
> 
> Signed-off-by: Krzysztof Adamski <k at japko.eu>

Acked-by: Maxime Ripard <maxime.ripard at free-electrons.com>

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160205/c800d063/attachment.sig>