SGTL5000 misc

[Fabio Estevam]

On Fri, Feb 5, 2016 at 1:08 AM, Erik Friesen <friesendrywall at gmail.com> wrote:
> There is another issue here, but when I have this connected to
> external power, it won't start the card on every other boot.
>
> With the code below, it seems to start every time.  If I don't skip,
> it dies on #8, which is the write of 0x7060 to CHIP_ANA_POWER
>
> This embeddedarm board supposedly power cycles the regulators, don't
> know if that is a factor or not.  The board finishes powerup 0x4060,
> but comes back on reboot at the reset value of 0x7060

It would be nice if you could send a patch to alsa-devel mailing list,
so that this can be properly reviewed there.