[PATCH 04/70] ARM: dts: r8a7793: Add I2C master nodes to DT
Simon Horman
horms+renesas at verge.net.au
Thu Feb 4 06:28:58 PST 2016
From: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
Instantiate all the 9 I2C controllers in the disabled state.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 135 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 132 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index aef9e69d6c26..f9d92de4f65b 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -19,6 +19,15 @@
#size-cells = <2>;
aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
spi0 = &qspi;
};
@@ -230,6 +239,120 @@
power-domains = <&cpg_clocks>;
};
+ /* The memory map in the User's Manual maps the cores to bus numbers */
+ i2c0: i2c at e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C0>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c1: i2c at e6518000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6518000 0 0x40>;
+ interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C1>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c2: i2c at e6530000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6530000 0 0x40>;
+ interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C2>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c at e6540000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6540000 0 0x40>;
+ interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C3>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c4: i2c at e6520000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6520000 0 0x40>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C4>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c5: i2c at e6528000 {
+ /* doesn't need pinmux */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6528000 0 0x40>;
+ interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C5>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c6: i2c at e60b0000 {
+ /* doesn't need pinmux */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
+ interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>;
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ i2c7: i2c at e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+ reg = <0 0xe6500000 0 0x425>;
+ interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7793_CLK_IIC0>;
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ i2c8: i2c at e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+ reg = <0 0xe6510000 0 0x425>;
+ interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7793_CLK_IIC1>;
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
pfc: pfc at e6060000 {
compatible = "renesas,pfc-r8a7793";
reg = <0 0xe6060000 0 0x250>;
@@ -820,19 +943,25 @@
reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
<&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
- <&cpg_clocks R8A7793_CLK_QSPI>;
+ <&cpg_clocks R8A7793_CLK_QSPI>, <&hp_clk>,
+ <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
+ <&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
clock-indices = <
R8A7793_CLK_GPIO7 R8A7793_CLK_GPIO6
R8A7793_CLK_GPIO5 R8A7793_CLK_GPIO4
R8A7793_CLK_GPIO3 R8A7793_CLK_GPIO2
R8A7793_CLK_GPIO1 R8A7793_CLK_GPIO0
- R8A7793_CLK_QSPI_MOD
+ R8A7793_CLK_QSPI_MOD R8A7793_CLK_I2C5
+ R8A7793_CLK_IICDVFS R8A7793_CLK_I2C4
+ R8A7793_CLK_I2C3 R8A7793_CLK_I2C2
+ R8A7793_CLK_I2C1 R8A7793_CLK_I2C0
>;
clock-output-names =
"gpio7", "gpio6", "gpio5", "gpio4",
"gpio3", "gpio2", "gpio1", "gpio0",
- "qspi_mod";
+ "qspi_mod", "i2c5", "i2c6", "i2c4",
+ "i2c3", "i2c2", "i2c1", "i2c0";
};
mstp11_clks: mstp11_clks at e615099c {
compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
--
2.7.0.rc3.207.g0ac5344
More information about the linux-arm-kernel
mailing list