[PATCH v2 05/26] clk: sunxi: Add display and TCON0 clocks driver
Maxime Ripard
maxime.ripard at free-electrons.com
Wed Feb 3 12:18:34 PST 2016
On Sat, Jan 16, 2016 at 11:29:41PM +0800, Chen-Yu Tsai wrote:
> Hi,
>
> On Thu, Jan 14, 2016 at 11:24 PM, Maxime Ripard
> <maxime.ripard at free-electrons.com> wrote:
> > The A10 SoCs and its relatives has a special clock controller to drive the
> > display engines (both frontend and backend), that have a lot in common with
> > the clock to drive the first TCON channel.
> >
> > Add a driver to support both.
> >
> > Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> > ---
> > Documentation/devicetree/bindings/clock/sunxi.txt | 2 +
> > drivers/clk/sunxi/Makefile | 1 +
> > drivers/clk/sunxi/clk-sun4i-display.c | 241 ++++++++++++++++++++++
> > 3 files changed, 244 insertions(+)
> > create mode 100644 drivers/clk/sunxi/clk-sun4i-display.c
> >
> > diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
> > index 8a47b77abfca..5360554a7d3f 100644
> > --- a/Documentation/devicetree/bindings/clock/sunxi.txt
> > +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
> > @@ -55,6 +55,7 @@ Required properties:
> > "allwinner,sun9i-a80-apb1-gates-clk" - for the APB1 gates on A80
> > "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
> > "allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
> > + "allwinner,sun4i-a10-display-clk" - for the display clocks on the A10
> > "allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13
> > "allwinner,sun4i-a10-mmc-clk" - for the MMC clock
> > "allwinner,sun9i-a80-mmc-clk" - for mmc module clocks on A80
> > @@ -64,6 +65,7 @@ Required properties:
> > "allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23
> > "allwinner,sun7i-a20-out-clk" - for the external output clocks
> > "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
> > + "allwinner,sun4i-a10-tcon-ch0-clk" - for the TCON channel 0 clock on the A10
> > "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
> > "allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
> > "allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31
> > diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
> > index cb4c299214ce..a991cd8ca509 100644
> > --- a/drivers/clk/sunxi/Makefile
> > +++ b/drivers/clk/sunxi/Makefile
> > @@ -10,6 +10,7 @@ obj-y += clk-a10-pll2.o
> > obj-y += clk-a20-gmac.o
> > obj-y += clk-mod0.o
> > obj-y += clk-simple-gates.o
> > +obj-y += clk-sun4i-display.o
> > obj-y += clk-sun8i-mbus.o
> > obj-y += clk-sun9i-core.o
> > obj-y += clk-sun9i-mmc.o
> > diff --git a/drivers/clk/sunxi/clk-sun4i-display.c b/drivers/clk/sunxi/clk-sun4i-display.c
> > new file mode 100644
> > index 000000000000..9dc6894f0934
> > --- /dev/null
> > +++ b/drivers/clk/sunxi/clk-sun4i-display.c
> > @@ -0,0 +1,241 @@
> > +/*
> > + * Copyright 2015 Maxime Ripard
> > + *
> > + * Maxime Ripard <maxime.ripard at free-electrons.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/clk-provider.h>
> > +#include <linux/kernel.h>
> > +#include <linux/of_address.h>
> > +#include <linux/reset-controller.h>
> > +#include <linux/slab.h>
> > +#include <linux/spinlock.h>
> > +
> > +struct sun4i_a10_display_clk_data {
> > + bool has_div;
> > + bool has_rst;
> > + u8 parents;
> > +
> > + u8 offset_en;
> > + u8 offset_div;
> > + u8 offset_mux;
> > + u8 offset_rst;
> > +
> > + u8 width_div;
> > + u8 width_mux;
> > +};
> > +
> > +struct reset_data {
> > + void __iomem *reg;
> > + spinlock_t *lock;
> > + struct reset_controller_dev rcdev;
> > + u8 offset;
> > +};
> > +
> > +static DEFINE_SPINLOCK(sun4i_a10_display_lock);
> > +
> > +static inline struct reset_data *rcdev_to_reset_data(struct reset_controller_dev *rcdev)
> > +{
> > + return container_of(rcdev, struct reset_data, rcdev);
> > +};
> > +
> > +static int sun4i_a10_display_assert(struct reset_controller_dev *rcdev,
> > + unsigned long id)
> > +{
> > + struct reset_data *data = rcdev_to_reset_data(rcdev);
> > + unsigned long flags;
> > + u32 reg;
> > +
> > + spin_lock_irqsave(data->lock, flags);
> > +
> > + reg = readl(data->reg);
> > + writel(reg & ~BIT(data->offset), data->reg);
> > +
> > + spin_unlock_irqrestore(data->lock, flags);
> > +
> > + return 0;
> > +}
> > +
> > +static int sun4i_a10_display_deassert(struct reset_controller_dev *rcdev,
> > + unsigned long id)
> > +{
> > + struct reset_data *data = rcdev_to_reset_data(rcdev);
> > + unsigned long flags;
> > + u32 reg;
> > +
> > + spin_lock_irqsave(data->lock, flags);
> > +
> > + reg = readl(data->reg);
> > + writel(reg | BIT(data->offset), data->reg);
> > +
> > + spin_unlock_irqrestore(data->lock, flags);
> > +
> > + return 0;
> > +}
> > +
> > +static int sun4i_a10_display_status(struct reset_controller_dev *rcdev,
> > + unsigned long id)
> > +{
> > + struct reset_data *data = rcdev_to_reset_data(rcdev);
> > +
> > + return !(readl(data->reg) & BIT(data->offset));
> > +}
> > +
> > +static const struct reset_control_ops sun4i_a10_display_reset_ops = {
> > + .assert = sun4i_a10_display_assert,
> > + .deassert = sun4i_a10_display_deassert,
> > + .status = sun4i_a10_display_status,
> > +};
> > +
> > +static int sun4i_a10_display_reset_xlate(struct reset_controller_dev *rcdev,
> > + const struct of_phandle_args *spec)
> > +{
> > + /* We only have a single reset signal */
> > + return 0;
> > +}
> > +
> > +static void __init sun4i_a10_display_init(struct device_node *node,
> > + struct sun4i_a10_display_clk_data *data)
> > +{
> > + const char *parents[data->parents];
> > + const char *clk_name = node->name;
> > + struct reset_data *reset_data;
> > + struct clk_divider *div = NULL;
> > + struct clk_gate *gate;
> > + struct clk_mux *mux;
> > + void __iomem *reg;
> > + struct clk *clk;
> > + int i;
> > +
> > + of_property_read_string(node, "clock-output-names", &clk_name);
> > +
> > + reg = of_io_request_and_map(node, 0, of_node_full_name(node));
> > + if (IS_ERR(reg)) {
> > + pr_err("%s: Could not map the clock registers\n", clk_name);
> > + return;
> > + }
> > +
> > + of_clk_parent_fill(node, parents, data->parents);
>
> What if someone uses an incorrect DT that has less parents described?
Then here be dragons ? :)
I'll fix that.
> > +
> > + mux = kzalloc(sizeof(*mux), GFP_KERNEL);
> > + if (!mux)
> > + return;
> > +
> > + mux->reg = reg;
> > + mux->shift = data->offset_mux;
> > + mux->mask = (1 << data->width_mux) - 1;
> > + mux->lock = &sun4i_a10_display_lock;
> > +
> > + gate = kzalloc(sizeof(*gate), GFP_KERNEL);
> > + if (!gate)
> > + goto free_mux;
> > +
> > + gate->reg = reg;
> > + gate->bit_idx = data->offset_en;
> > + gate->lock = &sun4i_a10_display_lock;
> > +
> > + if (data->has_div) {
> > + div = kzalloc(sizeof(*div), GFP_KERNEL);
> > + if (!div)
> > + goto free_gate;
> > +
> > + div->reg = reg;
> > + div->shift = data->offset_div;
> > + div->width = data->width_div;
> > + div->lock = &sun4i_a10_display_lock;
> > + }
> > +
> > + clk = clk_register_composite(NULL, clk_name,
> > + parents, data->parents,
> > + &mux->hw, &clk_mux_ops,
> > + data->has_div ? &div->hw : NULL,
> > + data->has_div ? &clk_divider_ops : NULL,
> > + &gate->hw, &clk_gate_ops,
> > + 0);
> > + if (IS_ERR(clk)) {
> > + pr_err("%s: Couldn't register the clock\n", clk_name);
> > + goto free_div;
> > + }
> > +
> > + of_clk_add_provider(node, of_clk_src_simple_get, clk);
>
> Check for errors?
Yep.
> > +
> > + if (!data->has_rst)
> > + return;
> > +
> > + reset_data = kzalloc(sizeof(*reset_data), GFP_KERNEL);
> > + if (!reset_data)
> > + goto free_clk;
> > +
> > + reset_data->reg = reg;
> > + reset_data->offset = data->offset_rst;
> > + reset_data->lock = &sun4i_a10_display_lock;
> > + reset_data->rcdev.nr_resets = 1;
> > + reset_data->rcdev.ops = &sun4i_a10_display_reset_ops;
> > + reset_data->rcdev.of_node = node;
> > + reset_data->rcdev.of_reset_n_cells = 0;
> > + reset_data->rcdev.of_xlate = &sun4i_a10_display_reset_xlate;
> > +
> > + if (reset_controller_register(&reset_data->rcdev)) {
> > + pr_err("%s: Couldn't register the reset controller\n",
> > + clk_name);
> > + goto free_reset;
> > + }
> > +
> > + return;
> > +
> > +free_reset:
> > + kfree(reset_data);
> > +free_clk:
> > + clk_unregister(clk);
> > +free_div:
> > + if (data->has_div)
> > + kfree(div);
> > +free_gate:
> > + kfree(gate);
> > +free_mux:
> > + kfree(mux);
>
> Cleanup after of_io_request_and_map()?
Hmm, indeed...
>
> > +}
> > +
> > +static struct sun4i_a10_display_clk_data sun4i_a10_tcon_ch0_data = {
> > + .has_rst = true,
> > + .parents = 4,
> > + .offset_en = 31,
> > + .offset_rst = 29,
>
> My datasheets (A10 v1.5, A20 v1.4), say bit 30 for LCD0 ch0 reset.
>
> A13 and R8 manuals do not list this clock, but A10s does, which has
> bit 30 for LCD reset and bit 29 for TV encoder reset.
>
> I suggest changing has_rst to int, and for sun5i variant, have
> has_rst = 2, reset_cells = 1, for 2 separate reset controls.
> The tcon and tv encoder bits of the DTSI should be updated as
> well.
>
> I assume your tests work because U-boot already de-asserted the
> resets (both if you're using composite output).
You're right, I'll fix it as you suggested.
> > + .offset_mux = 24,
> > + .width_mux = 2,
> > +};
> > +
> > +static void __init sun4i_a10_tcon_ch0_setup(struct device_node *node)
> > +{
> > + sun4i_a10_display_init(node, &sun4i_a10_tcon_ch0_data);
> > +}
> > +CLK_OF_DECLARE(sun4i_a10_tcon_ch0, "allwinner,sun4i-a10-tcon-ch0-clk",
> > + sun4i_a10_tcon_ch0_setup);
> > +
> > +static struct sun4i_a10_display_clk_data sun4i_a10_display_data = {
> > + .has_div = true,
>
> Missing .has_rst = true.
Indeed
> > + .parents = 3,
> > + .offset_en = 31,
> > + .offset_rst = 30,
> > + .offset_mux = 24,
> > + .offset_div = 0,
>
> This is already implied.
Because the structure would already by initialised to 0?
Yeah, true, but I wanted to make that explicit that the div offset is
actually 0, and not something that got forgotten.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160203/f5f4063e/attachment-0001.sig>
More information about the linux-arm-kernel
mailing list