[PATCH v3] ARM: dts: Add dts for Uniwest evi

Joshua Clayton stillcompiling at gmail.com
Wed Feb 3 09:37:45 PST 2016


Uniwest evi is a portable electrical eddy current non-destructive
testing device.

Signed-off-by: Joshua Clayton <stillcompiling at gmail.com>
---

Changes since v2:
- removed fsl,data-mapping and fsl,data-width from lvds0 per Phillip Zabel
- removed MX6QDL_PAD_GPIO_19__GPIO4_IO05 from hoggrp. This pin is
  used in a not yet upstreamed input driver.

 arch/arm/boot/dts/Makefile      |   1 +
 arch/arm/boot/dts/imx6q-evi.dts | 502 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 503 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6q-evi.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c4f42a78..4a4ef29 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -326,6 +326,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-cubox-i.dtb \
 	imx6q-dfi-fs700-m60.dtb \
 	imx6q-dmo-edmqmx6.dtb \
+	imx6q-evi.dtb \
 	imx6q-gk802.dtb \
 	imx6q-gw51xx.dtb \
 	imx6q-gw52xx.dtb \
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
new file mode 100644
index 0000000..4fa5601
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@@ -0,0 +1,502 @@
+/*
+ * Copyright 2016 United Western Technologies.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Uniwest Evi";
+	compatible = "uniwest,imx6q-evi", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_usbh1_vbus: regulator-usbhubreset {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		startup-delay-us = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_hubreset>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgvbus>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	panel {
+		compatible = "sharp,lq101k1ly04";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>;
+	status = "okay";
+};
+
+&ecspi3 {
+	fsl,spi-num-chipselects = <3>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>,
+		<&gpio4 25 GPIO_ACTIVE_LOW>,
+		<&gpio4 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3cs>;
+	status = "okay";
+};
+
+&ecspi5 {
+	fsl,spi-num-chipselects = <4>;
+	cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>,
+		<&gpio1 13 GPIO_ACTIVE_LOW>,
+		<&gpio1 12 GPIO_ACTIVE_LOW>,
+		<&gpio2 9 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5 &pinctrl_ecspi5cs>;
+	status = "okay";
+
+	eeprom: m95m02 at 1 {
+		compatible = "st,m95m02", "atmel,at25";
+		size = <262144>;
+		pagesize = <256>;
+		address-width = <24>;
+		spi-max-frequency = <5000000>;
+		reg = <1>;
+	};
+
+	pb_rtc: rtc at 3 {
+		compatible = "nxp,rtc-pcf2123";
+		spi-max-frequency = <2450000>;
+		spi-cs-high;
+		reg = <3>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 0>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpminand>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	clock-frequency = <100000>;
+	scl-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	battery: sbs-battery at b {
+		compatible = "sbs,sbs-battery";
+		reg = <0x0b>;
+		sbs,poll-retry-count = <100>;
+		sbs,i2c-retry-count = <100>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel at 0 {
+		status = "okay";
+
+		port at 4 {
+			reg = <4>;
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	non-removable;
+	status = "okay";
+};
+
+&weim {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x08000000 0x08000000>;
+	fsl,weim-cs-gpr = <&gpr>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weimfpga &pinctrl_weimcs>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* pwr mcu alert irq */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
+			/* remainder ???? */
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+		>;
+	};
+
+	pinctrl_ecspi1cs: ecspi1csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x10068
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x10068
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x1f068
+		>;
+	};
+
+	pinctrl_ecspi3cs: ecspi3csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b0
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi5: ecspi5grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CLK__ECSPI5_SCLK 0x100b1
+			MX6QDL_PAD_SD2_CMD__ECSPI5_MOSI 0x100b1
+			MX6QDL_PAD_SD2_DAT0__ECSPI5_MISO 0x100b1
+		>;
+	};
+
+	pinctrl_ecspi5cs: ecspi5csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
+			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x4001b0a8
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpminand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b8b1
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001b8b1
+		>;
+	};
+
+	pinctrl_weimcs: weimcsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1
+			MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0b1
+		>;
+	};
+
+	pinctrl_weimfpga: weimfpgagrp {
+		fsl,pins = <
+			/* weim misc */
+			MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1
+			MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1
+			MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
+			MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0xb0b1
+			MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0xb0b1
+			MX6QDL_PAD_EIM_EB0__EIM_EB0_B 0xb0b1
+			MX6QDL_PAD_EIM_EB1__EIM_EB1_B 0xb0b1
+			MX6QDL_PAD_EIM_EB2__EIM_EB2_B 0xb0b1
+			MX6QDL_PAD_EIM_EB3__EIM_EB3_B 0xb0b1
+			/* weim data */
+			MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0
+			MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0
+			MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0
+			MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0
+			MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0
+			MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0
+			MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0
+			MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0
+			MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0
+			MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0
+			MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0
+			MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0
+			MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0
+			MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0
+			MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0
+			MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0
+			MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0
+			/* weim address */
+			MX6QDL_PAD_EIM_A25__EIM_ADDR25 0xb0b1
+			MX6QDL_PAD_EIM_A24__EIM_ADDR24 0xb0b1
+			MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1
+			MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1
+			MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1
+			MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1
+			MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1
+			MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1
+			MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1
+			MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1
+			MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_CLK__UART2_RTS_B 0x1b0b1
+			MX6QDL_PAD_SD3_CMD__UART2_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0
+			/* usbh1_b OC */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
+		>;
+	};
+
+	pinctrl_usbh1_hubreset: usbh1hubresetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotgvbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+		>;
+	};
+};
-- 
2.5.0




More information about the linux-arm-kernel mailing list