[PATCH RESEND RFC] mach:-s3c64xx:Output trace information with WARN_ON if calls for setting up gpio board configuration fail in s3c64xx_i2s_cfg_gpio

[Nicholas Krause]

This fixes the function s3c64xx_i2c_cfg_gpio to log output to the
kernel log buff with WARN_ON if any of the calls to either
s3c_gpio_cfgpin_range or s3c_gpio_cfgpin fail as we cannot exit
from s3c64xx_i2s_cfg_gpio if any of these calls fail due to
other intended function work being required to complete. Further more
if a failure occurs allow the other users/devolopers of this driver
to properly check the kernel log buffers for a kernel trace for
when these calls failing to execute successfully arise.

Signed-off-by: Nicholas Krause <xerofoify at gmail.com>
---
v3:Fix more wording issues and uncaught build failure with
previous build test
v2:Fix Patch Wording as it was clearly confusing and incorrect
 arch/arm/mach-s3c64xx/dev-audio.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
index ff780a8..796ac75 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -36,10 +36,10 @@ static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev)
 		base = S3C64XX_GPE(0);
 		break;
 	case 2:
-		s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin_range(S3C64XX_GPH(6), 4, S3C_GPIO_SFN(5));
+		WARN_ON(s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C_GPIO_SFN(5)));
+		WARN_ON(s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C_GPIO_SFN(5)));
+		WARN_ON(s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C_GPIO_SFN(5)));
+		WARN_ON(s3c_gpio_cfgpin_range(S3C64XX_GPH(6), 4, S3C_GPIO_SFN(5)));
 		return 0;
 	default:
 		printk(KERN_DEBUG "Invalid I2S Controller number: %d\n",
@@ -47,7 +47,7 @@ static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3));
+	WARN_ON(s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3)));
 
 	return 0;
 }
-- 
2.1.4