[PATCH v2] mmc: sdhci-of-at91: fix pm runtime unbalanced issue in error path

[Ulf Hansson]

On 2 February 2016 at 12:55, Jisheng Zhang <jszhang at marvell.com> wrote:
> The device power usage counter is increased by pm_runtime_get_noresume
> but isn't decreased in err_add_host error path.
>
> Fix this issue by calling pm_runtime_put_noidle() in the error path to
> restore the device's power usage counter.
>
> Signed-off-by: Jisheng Zhang <jszhang at marvell.com>
> Acked-by: Ludovic Desroches <ludovic.desroches at atmel.com>
> Fixes: f5f17813ae9b ("mmc: sdhci-of-at91: add PM support)

Thanks, applied for fixes!

Kind regards
Uffe

> ---
> Since v1:
>  - Add Ludovic ack
>  - address Ulf's comment
>
>  drivers/mmc/host/sdhci-of-at91.c | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
> index 7db7163..35c02fc 100644
> --- a/drivers/mmc/host/sdhci-of-at91.c
> +++ b/drivers/mmc/host/sdhci-of-at91.c
> @@ -211,6 +211,7 @@ static int sdhci_at91_probe(struct platform_device *pdev)
>  pm_runtime_disable:
>         pm_runtime_disable(&pdev->dev);
>         pm_runtime_set_suspended(&pdev->dev);
> +       pm_runtime_put_noidle(&pdev->dev);
>  clocks_disable_unprepare:
>         clk_disable_unprepare(priv->gck);
>         clk_disable_unprepare(priv->mainck);
> --
> 1.9.1
>