[PATCH v2 2/3] Input: rotary-encoder - move configuration data to driver data
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Tue Feb 2 02:24:37 PST 2016
This is a preparation for the next patche. There is no change in
behaviour intended.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
drivers/input/misc/rotary_encoder.c | 166 ++++++++++++++++++++----------------
1 file changed, 94 insertions(+), 72 deletions(-)
diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c
index 386bdb5314e6..0582e851993f 100644
--- a/drivers/input/misc/rotary_encoder.c
+++ b/drivers/input/misc/rotary_encoder.c
@@ -32,58 +32,65 @@
struct rotary_encoder {
struct input_dev *input;
- const struct rotary_encoder_platform_data *pdata;
+ /* configuration */
+ unsigned int steps;
unsigned int axis;
- unsigned int pos;
+ unsigned int gpio_a;
+ unsigned int gpio_b;
+ unsigned int inverted_a;
+ unsigned int inverted_b;
+ unsigned int steps_per_period;
+ bool relative_axis;
+ bool rollover;
+ bool wakeup_source;
unsigned int irq_a;
unsigned int irq_b;
+ /* state */
+ unsigned int pos;
bool armed;
unsigned char dir; /* 0 - clockwise, 1 - CCW */
-
char last_stable;
};
-static int rotary_encoder_get_state(const struct rotary_encoder_platform_data *pdata)
+static int rotary_encoder_get_state(const struct rotary_encoder *encoder)
{
- int a = !!gpio_get_value(pdata->gpio_a);
- int b = !!gpio_get_value(pdata->gpio_b);
+ int a = !!gpio_get_value(encoder->gpio_a);
+ int b = !!gpio_get_value(encoder->gpio_b);
- a ^= pdata->inverted_a;
- b ^= pdata->inverted_b;
+ a ^= encoder->inverted_a;
+ b ^= encoder->inverted_b;
return ((a << 1) | b);
}
static void rotary_encoder_report_event(struct rotary_encoder *encoder)
{
- const struct rotary_encoder_platform_data *pdata = encoder->pdata;
-
- if (pdata->relative_axis) {
+ if (encoder->relative_axis) {
input_report_rel(encoder->input,
- pdata->axis, encoder->dir ? -1 : 1);
+ encoder->axis, encoder->dir ? -1 : 1);
} else {
unsigned int pos = encoder->pos;
if (encoder->dir) {
/* turning counter-clockwise */
- if (pdata->rollover)
- pos += pdata->steps;
+ if (encoder->rollover)
+ pos += encoder->steps;
if (pos)
pos--;
} else {
/* turning clockwise */
- if (pdata->rollover || pos < pdata->steps)
+ if (encoder->rollover || pos < encoder->steps)
pos++;
}
- if (pdata->rollover)
- pos %= pdata->steps;
+ if (encoder->rollover)
+ pos %= encoder->steps;
encoder->pos = pos;
- input_report_abs(encoder->input, pdata->axis, encoder->pos);
+ input_report_abs(encoder->input, encoder->axis, encoder->pos);
}
input_sync(encoder->input);
@@ -94,7 +101,7 @@ static irqreturn_t rotary_encoder_irq(int irq, void *dev_id)
struct rotary_encoder *encoder = dev_id;
int state;
- state = rotary_encoder_get_state(encoder->pdata);
+ state = rotary_encoder_get_state(encoder);
switch (state) {
case 0x0:
@@ -123,7 +130,7 @@ static irqreturn_t rotary_encoder_half_period_irq(int irq, void *dev_id)
struct rotary_encoder *encoder = dev_id;
int state;
- state = rotary_encoder_get_state(encoder->pdata);
+ state = rotary_encoder_get_state(encoder);
switch (state) {
case 0x00:
@@ -149,7 +156,7 @@ static irqreturn_t rotary_encoder_quarter_period_irq(int irq, void *dev_id)
unsigned char sum;
int state;
- state = rotary_encoder_get_state(encoder->pdata);
+ state = rotary_encoder_get_state(encoder);
/*
* We encode the previous and the current state using a byte.
@@ -199,38 +206,34 @@ static const struct of_device_id rotary_encoder_of_match[] = {
};
MODULE_DEVICE_TABLE(of, rotary_encoder_of_match);
-static struct rotary_encoder_platform_data *rotary_encoder_parse_dt(struct device *dev)
+static int rotary_encoder_parse_dt(struct device *dev,
+ struct rotary_encoder *encoder)
{
const struct of_device_id *of_id =
of_match_device(rotary_encoder_of_match, dev);
struct device_node *np = dev->of_node;
- struct rotary_encoder_platform_data *pdata;
enum of_gpio_flags flags;
int error;
if (!of_id || !np)
- return NULL;
-
- pdata = devm_kzalloc(dev, sizeof(struct rotary_encoder_platform_data),
- GFP_KERNEL);
- if (!pdata)
- return ERR_PTR(-ENOMEM);
+ return 1;
- of_property_read_u32(np, "rotary-encoder,steps", &pdata->steps);
- of_property_read_u32(np, "linux,axis", &pdata->axis);
+ of_property_read_u32(np, "rotary-encoder,steps", &encoder->steps);
+ of_property_read_u32(np, "linux,axis", &encoder->axis);
- pdata->gpio_a = of_get_gpio_flags(np, 0, &flags);
- pdata->inverted_a = flags & OF_GPIO_ACTIVE_LOW;
+ encoder->gpio_a = of_get_gpio_flags(np, 0, &flags);
+ encoder->inverted_a = flags & OF_GPIO_ACTIVE_LOW;
- pdata->gpio_b = of_get_gpio_flags(np, 1, &flags);
- pdata->inverted_b = flags & OF_GPIO_ACTIVE_LOW;
+ encoder->gpio_b = of_get_gpio_flags(np, 1, &flags);
+ encoder->inverted_b = flags & OF_GPIO_ACTIVE_LOW;
- pdata->relative_axis =
+ encoder->relative_axis =
of_property_read_bool(np, "rotary-encoder,relative-axis");
- pdata->rollover = of_property_read_bool(np, "rotary-encoder,rollover");
+ encoder->rollover =
+ of_property_read_bool(np, "rotary-encoder,rollover");
error = of_property_read_u32(np, "rotary-encoder,steps-per-period",
- &pdata->steps_per_period);
+ &encoder->steps_per_period);
if (error) {
/*
* The 'half-period' property has been deprecated, you must use
@@ -238,45 +241,57 @@ static struct rotary_encoder_platform_data *rotary_encoder_parse_dt(struct devic
* need to parse it to maintain compatibility.
*/
if (of_property_read_bool(np, "rotary-encoder,half-period")) {
- pdata->steps_per_period = 2;
+ encoder->steps_per_period = 2;
} else {
/* Fallback to one step per period behavior */
- pdata->steps_per_period = 1;
+ encoder->steps_per_period = 1;
}
}
- pdata->wakeup_source = of_property_read_bool(np, "wakeup-source");
+ encoder->wakeup_source = of_property_read_bool(np, "wakeup-source");
- return pdata;
+ return 0;
}
#else
-static inline struct rotary_encoder_platform_data *
-rotary_encoder_parse_dt(struct device *dev)
+static inline int rotary_encoder_parse_dt(struct device *dev,
+ struct rotary_encoder *encoder)
{
- return NULL;
+ return 1;
}
#endif
+static int rotary_encoder_parse_pdata(struct device *dev,
+ struct rotary_encoder *encoder)
+{
+ const struct rotary_encoder_platform_data *pdata;
+
+ pdata = dev_get_platdata(dev);
+ if (!pdata) {
+ dev_err(dev, "missing platform data\n");
+ return -EINVAL;
+ }
+
+ encoder->steps = pdata->steps;
+ encoder->axis = pdata->axis;
+ encoder->gpio_a = pdata->gpio_a;
+ encoder->gpio_b = pdata->gpio_b;
+ encoder->inverted_a = pdata->inverted_a;
+ encoder->inverted_b = pdata->inverted_b;
+ encoder->steps_per_period = pdata->steps_per_period;
+ encoder->relative_axis = pdata->relative_axis;
+ encoder->rollover = pdata->rollover;
+
+ return 0;
+}
+
static int rotary_encoder_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- const struct rotary_encoder_platform_data *pdata = dev_get_platdata(dev);
struct rotary_encoder *encoder;
struct input_dev *input;
irq_handler_t handler;
int err;
- if (!pdata) {
- pdata = rotary_encoder_parse_dt(dev);
- if (IS_ERR(pdata))
- return PTR_ERR(pdata);
-
- if (!pdata) {
- dev_err(dev, "missing platform data\n");
- return -EINVAL;
- }
- }
-
encoder = devm_kzalloc(dev, sizeof(struct rotary_encoder), GFP_KERNEL);
input = devm_input_allocate_device(&pdev->dev);
if (!encoder || !input) {
@@ -284,55 +299,62 @@ static int rotary_encoder_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ err = rotary_encoder_parse_dt(dev, encoder);
+ if (err > 0)
+ /* not instatiated by dt */
+ err = rotary_encoder_parse_pdata(dev, encoder);
+
+ if (err < 0)
+ return err;
+
encoder->input = input;
- encoder->pdata = pdata;
input->name = pdev->name;
input->id.bustype = BUS_HOST;
input->dev.parent = dev;
- if (pdata->relative_axis) {
+ if (encoder->relative_axis) {
input->evbit[0] = BIT_MASK(EV_REL);
- input->relbit[0] = BIT_MASK(pdata->axis);
+ input->relbit[0] = BIT_MASK(encoder->axis);
} else {
input->evbit[0] = BIT_MASK(EV_ABS);
input_set_abs_params(encoder->input,
- pdata->axis, 0, pdata->steps, 0, 1);
+ encoder->axis, 0, encoder->steps, 0, 1);
}
/* request the GPIOs */
- err = devm_gpio_request_one(dev, pdata->gpio_a,
+ err = devm_gpio_request_one(dev, encoder->gpio_a,
GPIOF_IN, dev_name(dev));
if (err) {
- dev_err(dev, "unable to request GPIO %d\n", pdata->gpio_a);
+ dev_err(dev, "unable to request GPIO %d\n", encoder->gpio_a);
return err;
}
- err = devm_gpio_request_one(dev, pdata->gpio_b,
+ err = devm_gpio_request_one(dev, encoder->gpio_b,
GPIOF_IN, dev_name(dev));
if (err) {
- dev_err(dev, "unable to request GPIO %d\n", pdata->gpio_b);
+ dev_err(dev, "unable to request GPIO %d\n", encoder->gpio_b);
return err;
}
- encoder->irq_a = gpio_to_irq(pdata->gpio_a);
- encoder->irq_b = gpio_to_irq(pdata->gpio_b);
+ encoder->irq_a = gpio_to_irq(encoder->gpio_a);
+ encoder->irq_b = gpio_to_irq(encoder->gpio_b);
- switch (pdata->steps_per_period) {
+ switch (encoder->steps_per_period) {
case 4:
handler = &rotary_encoder_quarter_period_irq;
- encoder->last_stable = rotary_encoder_get_state(pdata);
+ encoder->last_stable = rotary_encoder_get_state(encoder);
break;
case 2:
handler = &rotary_encoder_half_period_irq;
- encoder->last_stable = rotary_encoder_get_state(pdata);
+ encoder->last_stable = rotary_encoder_get_state(encoder);
break;
case 1:
handler = &rotary_encoder_irq;
break;
default:
dev_err(dev, "'%d' is not a valid steps-per-period value\n",
- pdata->steps_per_period);
+ encoder->steps_per_period);
return -EINVAL;
}
@@ -358,7 +380,7 @@ static int rotary_encoder_probe(struct platform_device *pdev)
return err;
}
- device_init_wakeup(&pdev->dev, pdata->wakeup_source);
+ device_init_wakeup(&pdev->dev, encoder->wakeup_source);
platform_set_drvdata(pdev, encoder);
--
2.7.0.rc3
More information about the linux-arm-kernel
mailing list