[PATCH 4/6] ARM: dts: imx6: change TX6 module names due to new HW revision
Shawn Guo
shawnguo at kernel.org
Mon Feb 1 22:36:48 PST 2016
On Wed, Jan 20, 2016 at 01:57:04PM +0100, Lothar Waßmann wrote:
> The second last digit of the Ka-Ro electronics TX-module names denotes
> the HW revision of the module. HW rev 1 and 3 of the TX6 modules can
> use the same DTB. Change this digit to 'x' to indicate that the DTB
> file can be used for both HW revisions.
This is simply a unnecessary churn of the source tree. I wouldn't take
it.
Shawn
>
> Signed-off-by: Lothar Waßmann <LW at KARO-electronics.de>
> ---
> arch/arm/boot/dts/Makefile | 10 +-
> arch/arm/boot/dts/imx6dl-tx6u-801x.dts | 177 -------------------
> arch/arm/boot/dts/imx6dl-tx6u-80xx.dts | 185 ++++++++++++++++++++
> arch/arm/boot/dts/imx6dl-tx6u-811x.dts | 150 ----------------
> arch/arm/boot/dts/imx6dl-tx6u-81xx.dts | 156 +++++++++++++++++
> arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts | 103 -----------
> arch/arm/boot/dts/imx6q-tx6q-1010.dts | 177 -------------------
> arch/arm/boot/dts/imx6q-tx6q-10x0-comtft.dts | 119 +++++++++++++
> arch/arm/boot/dts/imx6q-tx6q-10x0.dts | 191 ++++++++++++++++++++
> arch/arm/boot/dts/imx6q-tx6q-1110.dts | 154 -----------------
> arch/arm/boot/dts/imx6q-tx6q-11x0.dts | 249 +++++++++++++++++++++++++++
> 11 files changed, 905 insertions(+), 766 deletions(-)
> delete mode 100644 arch/arm/boot/dts/imx6dl-tx6u-801x.dts
> create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-80xx.dts
> delete mode 100644 arch/arm/boot/dts/imx6dl-tx6u-811x.dts
> create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-81xx.dts
> delete mode 100644 arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
> delete mode 100644 arch/arm/boot/dts/imx6q-tx6q-1010.dts
> create mode 100644 arch/arm/boot/dts/imx6q-tx6q-10x0-comtft.dts
> create mode 100644 arch/arm/boot/dts/imx6q-tx6q-10x0.dts
> delete mode 100644 arch/arm/boot/dts/imx6q-tx6q-1110.dts
> create mode 100644 arch/arm/boot/dts/imx6q-tx6q-11x0.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index a4a6d70..5759aac 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -312,8 +312,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
> imx6dl-sabrelite.dtb \
> imx6dl-sabresd.dtb \
> imx6dl-tx6dl-comtft.dtb \
> - imx6dl-tx6u-801x.dtb \
> - imx6dl-tx6u-811x.dtb \
> + imx6dl-tx6u-80xx.dtb \
> + imx6dl-tx6u-81xx.dtb \
> imx6dl-udoo.dtb \
> imx6dl-wandboard.dtb \
> imx6dl-wandboard-revb1.dtb \
> @@ -342,11 +342,11 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
> imx6q-sabresd.dtb \
> imx6q-sbc6x.dtb \
> imx6q-tbs2910.dtb \
> - imx6q-tx6q-1010.dtb \
> - imx6q-tx6q-1010-comtft.dtb \
> imx6q-tx6q-1020.dtb \
> imx6q-tx6q-1020-comtft.dtb \
> - imx6q-tx6q-1110.dtb \
> + imx6q-tx6q-10x0-comtft.dtb \
> + imx6q-tx6q-10x0.dtb \
> + imx6q-tx6q-11x0.dtb \
> imx6q-udoo.dtb \
> imx6q-wandboard.dtb \
> imx6q-wandboard-revb1.dtb
> diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
> deleted file mode 100644
> index 5fe465c..0000000
> --- a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
> +++ /dev/null
> @@ -1,177 +0,0 @@
> -/*
> - * Copyright 2014 Lothar Waßmann <LW at KARO-electronics.de>
> - *
> - * The code contained herein is licensed under the GNU General Public
> - * License. You may obtain a copy of the GNU General Public License
> - * Version 2 at the following locations:
> - *
> - * http://www.opensource.org/licenses/gpl-license.html
> - * http://www.gnu.org/copyleft/gpl.html
> - */
> -
> -/dts-v1/;
> -#include "imx6dl.dtsi"
> -#include "imx6qdl-tx6.dtsi"
> -
> -/ {
> - model = "Ka-Ro electronics TX6U-801x Module";
> - compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
> -
> - aliases {
> - display = &display;
> - };
> -
> - backlight: backlight {
> - compatible = "pwm-backlight";
> - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
> - power-supply = <®_3v3>;
> - /*
> - * a poor man's way to create a 1:1 relationship between
> - * the PWM value and the actual duty cycle
> - */
> - brightness-levels = < 0 1 2 3 4 5 6 7 8 9
> - 10 11 12 13 14 15 16 17 18 19
> - 20 21 22 23 24 25 26 27 28 29
> - 30 31 32 33 34 35 36 37 38 39
> - 40 41 42 43 44 45 46 47 48 49
> - 50 51 52 53 54 55 56 57 58 59
> - 60 61 62 63 64 65 66 67 68 69
> - 70 71 72 73 74 75 76 77 78 79
> - 80 81 82 83 84 85 86 87 88 89
> - 90 91 92 93 94 95 96 97 98 99
> - 100>;
> - default-brightness-level = <50>;
> - };
> -
> - display: display at di0 {
> - compatible = "fsl,imx-parallel-display";
> - interface-pix-fmt = "rgb24";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_disp0_1>;
> - status = "okay";
> -
> - port {
> - display0_in: endpoint {
> - remote-endpoint = <&ipu1_di0_disp0>;
> - };
> - };
> -
> - display-timings {
> - VGA {
> - clock-frequency = <25200000>;
> - hactive = <640>;
> - vactive = <480>;
> - hback-porch = <48>;
> - hsync-len = <96>;
> - hfront-porch = <16>;
> - vback-porch = <31>;
> - vsync-len = <2>;
> - vfront-porch = <12>;
> - hsync-active = <0>;
> - vsync-active = <0>;
> - de-active = <1>;
> - pixelclk-active = <0>;
> - };
> -
> - ETV570 {
> - clock-frequency = <25200000>;
> - hactive = <640>;
> - vactive = <480>;
> - hback-porch = <114>;
> - hsync-len = <30>;
> - hfront-porch = <16>;
> - vback-porch = <32>;
> - vsync-len = <3>;
> - vfront-porch = <10>;
> - hsync-active = <0>;
> - vsync-active = <0>;
> - de-active = <1>;
> - pixelclk-active = <0>;
> - };
> -
> - ET0350 {
> - clock-frequency = <6413760>;
> - hactive = <320>;
> - vactive = <240>;
> - hback-porch = <34>;
> - hsync-len = <34>;
> - hfront-porch = <20>;
> - vback-porch = <15>;
> - vsync-len = <3>;
> - vfront-porch = <4>;
> - hsync-active = <0>;
> - vsync-active = <0>;
> - de-active = <1>;
> - pixelclk-active = <0>;
> - };
> -
> - ET0430 {
> - clock-frequency = <9009000>;
> - hactive = <480>;
> - vactive = <272>;
> - hback-porch = <2>;
> - hsync-len = <41>;
> - hfront-porch = <2>;
> - vback-porch = <2>;
> - vsync-len = <10>;
> - vfront-porch = <2>;
> - hsync-active = <0>;
> - vsync-active = <0>;
> - de-active = <1>;
> - pixelclk-active = <1>;
> - };
> -
> - ET0500 {
> - clock-frequency = <33264000>;
> - hactive = <800>;
> - vactive = <480>;
> - hback-porch = <88>;
> - hsync-len = <128>;
> - hfront-porch = <40>;
> - vback-porch = <33>;
> - vsync-len = <2>;
> - vfront-porch = <10>;
> - hsync-active = <0>;
> - vsync-active = <0>;
> - de-active = <1>;
> - pixelclk-active = <0>;
> - };
> -
> - ET0700 { /* same as ET0500 */
> - clock-frequency = <33264000>;
> - hactive = <800>;
> - vactive = <480>;
> - hback-porch = <88>;
> - hsync-len = <128>;
> - hfront-porch = <40>;
> - vback-porch = <33>;
> - vsync-len = <2>;
> - vfront-porch = <10>;
> - hsync-active = <0>;
> - vsync-active = <0>;
> - de-active = <1>;
> - pixelclk-active = <0>;
> - };
> -
> - ETQ570 {
> - clock-frequency = <6596040>;
> - hactive = <320>;
> - vactive = <240>;
> - hback-porch = <38>;
> - hsync-len = <30>;
> - hfront-porch = <30>;
> - vback-porch = <16>;
> - vsync-len = <3>;
> - vfront-porch = <4>;
> - hsync-active = <0>;
> - vsync-active = <0>;
> - de-active = <1>;
> - pixelclk-active = <0>;
> - };
> - };
> - };
> -};
> -
> -&ipu1_di0_disp0 {
> - remote-endpoint = <&display0_in>;
> -};
> diff --git a/arch/arm/boot/dts/imx6dl-tx6u-80xx.dts b/arch/arm/boot/dts/imx6dl-tx6u-80xx.dts
> new file mode 100644
> index 0000000..f6621d6
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-tx6u-80xx.dts
> @@ -0,0 +1,185 @@
> +/*
> + * Copyright 2014 Lothar Waßmann <LW at KARO-electronics.de>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +#include "imx6dl.dtsi"
> +#include "imx6qdl-tx6.dtsi"
> +
> +/ {
> + model = "Ka-Ro electronics TX6U-801x/-803x Module";
> + compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
> +
> + aliases {
> + display = &display;
> + };
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
> + power-supply = <®_3v3>;
> + /*
> + * a poor man's way to create a 1:1 relationship between
> + * the PWM value and the actual duty cycle
> + */
> + brightness-levels = < 0 1 2 3 4 5 6 7 8 9
> + 10 11 12 13 14 15 16 17 18 19
> + 20 21 22 23 24 25 26 27 28 29
> + 30 31 32 33 34 35 36 37 38 39
> + 40 41 42 43 44 45 46 47 48 49
> + 50 51 52 53 54 55 56 57 58 59
> + 60 61 62 63 64 65 66 67 68 69
> + 70 71 72 73 74 75 76 77 78 79
> + 80 81 82 83 84 85 86 87 88 89
> + 90 91 92 93 94 95 96 97 98 99
> + 100>;
> + default-brightness-level = <50>;
> + };
> +
> + display: display at di0 {
> + compatible = "fsl,imx-parallel-display";
> + interface-pix-fmt = "rgb24";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_disp0_1>;
> + status = "okay";
> +
> + port {
> + display0_in: endpoint {
> + remote-endpoint = <&ipu1_di0_disp0>;
> + };
> + };
> +
> + display-timings {
> + VGA {
> + clock-frequency = <25200000>;
> + hactive = <640>;
> + vactive = <480>;
> + hback-porch = <48>;
> + hsync-len = <96>;
> + hfront-porch = <16>;
> + vback-porch = <31>;
> + vsync-len = <2>;
> + vfront-porch = <12>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> +
> + ETV570 {
> + clock-frequency = <25200000>;
> + hactive = <640>;
> + vactive = <480>;
> + hback-porch = <114>;
> + hsync-len = <30>;
> + hfront-porch = <16>;
> + vback-porch = <32>;
> + vsync-len = <3>;
> + vfront-porch = <10>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> +
> + ET0350 {
> + clock-frequency = <6413760>;
> + hactive = <320>;
> + vactive = <240>;
> + hback-porch = <34>;
> + hsync-len = <34>;
> + hfront-porch = <20>;
> + vback-porch = <15>;
> + vsync-len = <3>;
> + vfront-porch = <4>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> +
> + ET0430 {
> + clock-frequency = <9009000>;
> + hactive = <480>;
> + vactive = <272>;
> + hback-porch = <2>;
> + hsync-len = <41>;
> + hfront-porch = <2>;
> + vback-porch = <2>;
> + vsync-len = <10>;
> + vfront-porch = <2>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <1>;
> + };
> +
> + ET0500 {
> + clock-frequency = <33264000>;
> + hactive = <800>;
> + vactive = <480>;
> + hback-porch = <88>;
> + hsync-len = <128>;
> + hfront-porch = <40>;
> + vback-porch = <33>;
> + vsync-len = <2>;
> + vfront-porch = <10>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> +
> + ET0700 { /* same as ET0500 */
> + clock-frequency = <33264000>;
> + hactive = <800>;
> + vactive = <480>;
> + hback-porch = <88>;
> + hsync-len = <128>;
> + hfront-porch = <40>;
> + vback-porch = <33>;
> + vsync-len = <2>;
> + vfront-porch = <10>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> +
> + ETQ570 {
> + clock-frequency = <6596040>;
> + hactive = <320>;
> + vactive = <240>;
> + hback-porch = <38>;
> + hsync-len = <30>;
> + hfront-porch = <30>;
> + vback-porch = <16>;
> + vsync-len = <3>;
> + vfront-porch = <4>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> + };
> + };
> +};
> +
> +&ipu1_di0_disp0 {
> + remote-endpoint = <&display0_in>;
> +};
> +
> +®_lcd0_pwr {
> + status = "okay";
> +};
> +
> +®_lcd1_pwr {
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
> deleted file mode 100644
> index c275eec..0000000
> --- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
> +++ /dev/null
> @@ -1,150 +0,0 @@
> -/*
> - * Copyright 2014 Lothar Waßmann <LW at KARO-electronics.de>
> - *
> - * The code contained herein is licensed under the GNU General Public
> - * License. You may obtain a copy of the GNU General Public License
> - * Version 2 at the following locations:
> - *
> - * http://www.opensource.org/licenses/gpl-license.html
> - * http://www.gnu.org/copyleft/gpl.html
> - */
> -
> -/dts-v1/;
> -#include "imx6dl.dtsi"
> -#include "imx6qdl-tx6.dtsi"
> -
> -/ {
> - model = "Ka-Ro electronics TX6U-811x Module";
> - compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
> -
> - aliases {
> - display = &lvds0;
> - lvds0 = &lvds0;
> - lvds1 = &lvds1;
> - };
> -
> - backlight0: backlight0 {
> - compatible = "pwm-backlight";
> - pwms = <&pwm2 0 500000 0>;
> - power-supply = <®_lcd0_pwr>;
> - /*
> - * a poor man's way to create a 1:1 relationship between
> - * the PWM value and the actual duty cycle
> - */
> - brightness-levels = < 0 1 2 3 4 5 6 7 8 9
> - 10 11 12 13 14 15 16 17 18 19
> - 20 21 22 23 24 25 26 27 28 29
> - 30 31 32 33 34 35 36 37 38 39
> - 40 41 42 43 44 45 46 47 48 49
> - 50 51 52 53 54 55 56 57 58 59
> - 60 61 62 63 64 65 66 67 68 69
> - 70 71 72 73 74 75 76 77 78 79
> - 80 81 82 83 84 85 86 87 88 89
> - 90 91 92 93 94 95 96 97 98 99
> - 100>;
> - default-brightness-level = <50>;
> - };
> -
> - backlight1: backlight1 {
> - compatible = "pwm-backlight";
> - pwms = <&pwm1 0 500000 0>;
> - power-supply = <®_lcd1_pwr>;
> - /*
> - * a poor man's way to create a 1:1 relationship between
> - * the PWM value and the actual duty cycle
> - */
> - brightness-levels = < 0 1 2 3 4 5 6 7 8 9
> - 10 11 12 13 14 15 16 17 18 19
> - 20 21 22 23 24 25 26 27 28 29
> - 30 31 32 33 34 35 36 37 38 39
> - 40 41 42 43 44 45 46 47 48 49
> - 50 51 52 53 54 55 56 57 58 59
> - 60 61 62 63 64 65 66 67 68 69
> - 70 71 72 73 74 75 76 77 78 79
> - 80 81 82 83 84 85 86 87 88 89
> - 90 91 92 93 94 95 96 97 98 99
> - 100>;
> - default-brightness-level = <50>;
> - };
> -};
> -
> -&i2c3 {
> - polytouch2: eeti at 04 {
> - compatible = "eeti,egalax_ts";
> - reg = <0x04>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_eeti>;
> - interrupt-parent = <&gpio3>;
> - interrupts = <22 0>;
> - wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
> - linux,wakeup;
> - };
> -};
> -
> -&iomuxc {
> - imx6dl-tx6u-811x {
> - pinctrl_eeti: eetigrp {
> - fsl,pins = <
> - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
> - >;
> - };
> - };
> -};
> -
> -&kpp {
> - status = "disabled"; /* pad conflict with backlight1 PWM */
> -};
> -
> -&ldb {
> - status = "okay";
> -
> - lvds0: lvds-channel at 0 {
> - fsl,data-mapping = "spwg";
> - fsl,data-width = <18>;
> - status = "okay";
> -
> - display-timings {
> - native-mode = <&lvds_timing0>;
> - lvds_timing0: hsd100pxn1 {
> - clock-frequency = <65000000>;
> - hactive = <1024>;
> - vactive = <768>;
> - hback-porch = <220>;
> - hfront-porch = <40>;
> - vback-porch = <21>;
> - vfront-porch = <7>;
> - hsync-len = <60>;
> - vsync-len = <10>;
> - de-active = <1>;
> - pixelclk-active = <1>;
> - };
> - };
> - };
> -
> - lvds1: lvds-channel at 1 {
> - fsl,data-mapping = "spwg";
> - fsl,data-width = <18>;
> - status = "disabled";
> -
> - display-timings {
> - native-mode = <&lvds_timing1>;
> - lvds_timing1: hsd100pxn1 {
> - clock-frequency = <65000000>;
> - hactive = <1024>;
> - vactive = <768>;
> - hback-porch = <220>;
> - hfront-porch = <40>;
> - vback-porch = <21>;
> - vfront-porch = <7>;
> - hsync-len = <60>;
> - vsync-len = <10>;
> - de-active = <1>;
> - pixelclk-active = <1>;
> - };
> - };
> - };
> -};
> -
> -&pwm1 {
> - status = "okay";
> -};
> diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx.dts
> new file mode 100644
> index 0000000..5ff8e13
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-tx6u-81xx.dts
> @@ -0,0 +1,156 @@
> +/*
> + * Copyright 2014 Lothar Waßmann <LW at KARO-electronics.de>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +#include "imx6dl.dtsi"
> +#include "imx6qdl-tx6.dtsi"
> +
> +/ {
> + model = "Ka-Ro electronics TX6U-81xx Module";
> + compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
> +
> + aliases {
> + display = &lvds0;
> + lvds0 = &lvds0;
> + lvds1 = &lvds1;
> + };
> +
> + backlight0: backlight0 {
> + compatible = "pwm-backlight";
> + pwms = <&pwm2 0 500000 0>;
> + power-supply = <®_3v3>;
> + /*
> + * a poor man's way to create a 1:1 relationship between
> + * the PWM value and the actual duty cycle
> + */
> + brightness-levels = < 0 1 2 3 4 5 6 7 8 9
> + 10 11 12 13 14 15 16 17 18 19
> + 20 21 22 23 24 25 26 27 28 29
> + 30 31 32 33 34 35 36 37 38 39
> + 40 41 42 43 44 45 46 47 48 49
> + 50 51 52 53 54 55 56 57 58 59
> + 60 61 62 63 64 65 66 67 68 69
> + 70 71 72 73 74 75 76 77 78 79
> + 80 81 82 83 84 85 86 87 88 89
> + 90 91 92 93 94 95 96 97 98 99
> + 100>;
> + default-brightness-level = <50>;
> + };
> +
> + backlight1: backlight1 {
> + compatible = "pwm-backlight";
> + pwms = <&pwm1 0 500000 0>;
> + power-supply = <®_3v3>;
> + /*
> + * a poor man's way to create a 1:1 relationship between
> + * the PWM value and the actual duty cycle
> + */
> + brightness-levels = < 0 1 2 3 4 5 6 7 8 9
> + 10 11 12 13 14 15 16 17 18 19
> + 20 21 22 23 24 25 26 27 28 29
> + 30 31 32 33 34 35 36 37 38 39
> + 40 41 42 43 44 45 46 47 48 49
> + 50 51 52 53 54 55 56 57 58 59
> + 60 61 62 63 64 65 66 67 68 69
> + 70 71 72 73 74 75 76 77 78 79
> + 80 81 82 83 84 85 86 87 88 89
> + 90 91 92 93 94 95 96 97 98 99
> + 100>;
> + default-brightness-level = <50>;
> + };
> +};
> +
> +&i2c3 {
> + polytouch1: eeti at 04 {
> + compatible = "eeti,egalax_ts";
> + reg = <0x04>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_eeti>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <22 0>;
> + wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
> + linux,wakeup;
> + };
> +};
> +
> +&iomuxc {
> + imx6dl-tx6u-81xx {
> + pinctrl_eeti: eetigrp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
> + >;
> + };
> + };
> +};
> +
> +&kpp {
> + status = "disabled"; /* pads partially clash with backlight1 PWM */
> +};
> +
> +&ldb {
> + status = "okay";
> +
> + lvds0: lvds-channel at 0 {
> + fsl,data-mapping = "spwg";
> + fsl,data-width = <18>;
> + status = "okay";
> +
> + display-timings {
> + native-mode = <&lvds0_timing0>;
> +
> + lvds0_timing0: hsd100pxn1 {
> + clock-frequency = <65000000>;
> + hactive = <1024>;
> + vactive = <768>;
> + hback-porch = <220>;
> + hfront-porch = <40>;
> + vback-porch = <21>;
> + vfront-porch = <7>;
> + hsync-len = <60>;
> + vsync-len = <10>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <1>;
> + };
> + };
> + };
> +
> + lvds1: lvds-channel at 1 {
> + fsl,data-mapping = "spwg";
> + fsl,data-width = <18>;
> + status = "disabled";
> +
> + display-timings {
> + native-mode = <&lvds1_timing0>;
> +
> + lvds1_timing0: hsd100pxn1 {
> + clock-frequency = <65000000>;
> + hactive = <1024>;
> + vactive = <768>;
> + hback-porch = <220>;
> + hfront-porch = <40>;
> + vback-porch = <21>;
> + vfront-porch = <7>;
> + hsync-len = <60>;
> + vsync-len = <10>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <1>;
> + };
> + };
> + };
> +};
> +
> +&pwm1 {
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
> deleted file mode 100644
> index b18fae1..0000000
> --- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
> +++ /dev/null
> @@ -1,103 +0,0 @@
> -/*
> - * Copyright 2014 Lothar Waßmann <LW at KARO-electronics.de>
> - *
> - * The code contained herein is licensed under the GNU General Public
> - * License. You may obtain a copy of the GNU General Public License
> - * Version 2 at the following locations:
> - *
> - * http://www.opensource.org/licenses/gpl-license.html
> - * http://www.gnu.org/copyleft/gpl.html
> - */
> -
> -/dts-v1/;
> -#include "imx6q.dtsi"
> -#include "imx6qdl-tx6.dtsi"
> -
> -/ {
> - model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT";
> - compatible = "karo,imx6q-tx6q", "fsl,imx6q";
> -
> - aliases {
> - display = &display;
> - };
> -
> - backlight: backlight {
> - compatible = "pwm-backlight";
> - pwms = <&pwm2 0 500000 0>;
> - power-supply = <®_3v3>;
> - /*
> - * a poor man's way to create a 1:1 relationship between
> - * the PWM value and the actual duty cycle
> - */
> - brightness-levels = < 0 1 2 3 4 5 6 7 8 9
> - 10 11 12 13 14 15 16 17 18 19
> - 20 21 22 23 24 25 26 27 28 29
> - 30 31 32 33 34 35 36 37 38 39
> - 40 41 42 43 44 45 46 47 48 49
> - 50 51 52 53 54 55 56 57 58 59
> - 60 61 62 63 64 65 66 67 68 69
> - 70 71 72 73 74 75 76 77 78 79
> - 80 81 82 83 84 85 86 87 88 89
> - 90 91 92 93 94 95 96 97 98 99
> - 100>;
> - default-brightness-level = <50>;
> - };
> -
> - display: display at di0 {
> - compatible = "fsl,imx-parallel-display";
> - interface-pix-fmt = "rgb24";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_disp0_1>;
> - status = "okay";
> -
> - port {
> - display0_in: endpoint {
> - remote-endpoint = <&ipu1_di0_disp0>;
> - };
> - };
> -
> - display-timings {
> - native-mode = <&ET070001DM6>;
> -
> - ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
> - clock-frequency = <33264000>;
> - hactive = <800>;
> - vactive = <480>;
> - hback-porch = <88>;
> - hsync-len = <128>;
> - hfront-porch = <40>;
> - vback-porch = <33>;
> - vsync-len = <2>;
> - vfront-porch = <10>;
> - hsync-active = <0>;
> - vsync-active = <0>;
> - de-active = <1>;
> - pixelclk-active = <1>;
> - };
> - };
> - };
> -};
> -
> -&can1 {
> - status = "disabled";
> -};
> -
> -&can2 {
> - xceiver-supply = <®_3v3>;
> -};
> -
> -&ipu1_di0_disp0 {
> - remote-endpoint = <&display0_in>;
> -};
> -
> -&kpp {
> - status = "disabled";
> -};
> -
> -®_can_xcvr {
> - status = "disabled";
> -};
> -
> -&touchscreen {
> - status = "disabled";
> -};
> diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
> deleted file mode 100644
> index b58ec9c..0000000
> --- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts
> +++ /dev/null
> @@ -1,177 +0,0 @@
> -/*
> - * Copyright 2014 Lothar Waßmann <LW at KARO-electronics.de>
> - *
> - * The code contained herein is licensed under the GNU General Public
> - * License. You may obtain a copy of the GNU General Public License
> - * Version 2 at the following locations:
> - *
> - * http://www.opensource.org/licenses/gpl-license.html
> - * http://www.gnu.org/copyleft/gpl.html
> - */
> -
> -/dts-v1/;
> -#include "imx6q.dtsi"
> -#include "imx6qdl-tx6.dtsi"
> -
> -/ {
> - model = "Ka-Ro electronics TX6Q-1010 Module";
> - compatible = "karo,imx6q-tx6q", "fsl,imx6q";
> -
> - aliases {
> - display = &display;
> - };
> -
> - backlight: backlight {
> - compatible = "pwm-backlight";
> - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
> - power-supply = <®_3v3>;
> - /*
> - * a poor man's way to create a 1:1 relationship between
> - * the PWM value and the actual duty cycle
> - */
> - brightness-levels = < 0 1 2 3 4 5 6 7 8 9
> - 10 11 12 13 14 15 16 17 18 19
> - 20 21 22 23 24 25 26 27 28 29
> - 30 31 32 33 34 35 36 37 38 39
> - 40 41 42 43 44 45 46 47 48 49
> - 50 51 52 53 54 55 56 57 58 59
> - 60 61 62 63 64 65 66 67 68 69
> - 70 71 72 73 74 75 76 77 78 79
> - 80 81 82 83 84 85 86 87 88 89
> - 90 91 92 93 94 95 96 97 98 99
> - 100>;
> - default-brightness-level = <50>;
> - };
> -
> - display: display at di0 {
> - compatible = "fsl,imx-parallel-display";
> - interface-pix-fmt = "rgb24";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_disp0_1>;
> - status = "okay";
> -
> - port {
> - display0_in: endpoint {
> - remote-endpoint = <&ipu1_di0_disp0>;
> - };
> - };
> -
> - display-timings {
> - VGA {
> - clock-frequency = <25200000>;
> - hactive = <640>;
> - vactive = <480>;
> - hback-porch = <48>;
> - hsync-len = <96>;
> - hfront-porch = <16>;
> - vback-porch = <31>;
> - vsync-len = <2>;
> - vfront-porch = <12>;
> - hsync-active = <0>;
> - vsync-active = <0>;
> - de-active = <1>;
> - pixelclk-active = <0>;
> - };
> -
> - ETV570 {
> - clock-frequency = <25200000>;
> - hactive = <640>;
> - vactive = <480>;
> - hback-porch = <114>;
> - hsync-len = <30>;
> - hfront-porch = <16>;
> - vback-porch = <32>;
> - vsync-len = <3>;
> - vfront-porch = <10>;
> - hsync-active = <0>;
> - vsync-active = <0>;
> - de-active = <1>;
> - pixelclk-active = <0>;
> - };
> -
> - ET0350 {
> - clock-frequency = <6413760>;
> - hactive = <320>;
> - vactive = <240>;
> - hback-porch = <34>;
> - hsync-len = <34>;
> - hfront-porch = <20>;
> - vback-porch = <15>;
> - vsync-len = <3>;
> - vfront-porch = <4>;
> - hsync-active = <0>;
> - vsync-active = <0>;
> - de-active = <1>;
> - pixelclk-active = <0>;
> - };
> -
> - ET0430 {
> - clock-frequency = <9009000>;
> - hactive = <480>;
> - vactive = <272>;
> - hback-porch = <2>;
> - hsync-len = <41>;
> - hfront-porch = <2>;
> - vback-porch = <2>;
> - vsync-len = <10>;
> - vfront-porch = <2>;
> - hsync-active = <0>;
> - vsync-active = <0>;
> - de-active = <1>;
> - pixelclk-active = <1>;
> - };
> -
> - ET0500 {
> - clock-frequency = <33264000>;
> - hactive = <800>;
> - vactive = <480>;
> - hback-porch = <88>;
> - hsync-len = <128>;
> - hfront-porch = <40>;
> - vback-porch = <33>;
> - vsync-len = <2>;
> - vfront-porch = <10>;
> - hsync-active = <0>;
> - vsync-active = <0>;
> - de-active = <1>;
> - pixelclk-active = <0>;
> - };
> -
> - ET0700 { /* same as ET0500 */
> - clock-frequency = <33264000>;
> - hactive = <800>;
> - vactive = <480>;
> - hback-porch = <88>;
> - hsync-len = <128>;
> - hfront-porch = <40>;
> - vback-porch = <33>;
> - vsync-len = <2>;
> - vfront-porch = <10>;
> - hsync-active = <0>;
> - vsync-active = <0>;
> - de-active = <1>;
> - pixelclk-active = <0>;
> - };
> -
> - ETQ570 {
> - clock-frequency = <6596040>;
> - hactive = <320>;
> - vactive = <240>;
> - hback-porch = <38>;
> - hsync-len = <30>;
> - hfront-porch = <30>;
> - vback-porch = <16>;
> - vsync-len = <3>;
> - vfront-porch = <4>;
> - hsync-active = <0>;
> - vsync-active = <0>;
> - de-active = <1>;
> - pixelclk-active = <0>;
> - };
> - };
> - };
> -};
> -
> -&ipu1_di0_disp0 {
> - remote-endpoint = <&display0_in>;
> -};
> diff --git a/arch/arm/boot/dts/imx6q-tx6q-10x0-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-10x0-comtft.dts
> new file mode 100644
> index 0000000..8997553
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-tx6q-10x0-comtft.dts
> @@ -0,0 +1,119 @@
> +/*
> + * Copyright 2014 Lothar Waßmann <LW at KARO-electronics.de>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +#include "imx6q.dtsi"
> +#include "imx6qdl-tx6.dtsi"
> +
> +/ {
> + model = "Ka-Ro electronics TX6Q-1010/-1030 Module on CoMpact TFT";
> + compatible = "karo,imx6q-tx6q", "fsl,imx6q";
> +
> + aliases {
> + display = &mxcfb0;
> + mxcfb0 = &mxcfb0;
> + };
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pwm2 0 500000 0>;
> + power-supply = <®_3v3>;
> + /*
> + * a poor man's way to create a 1:1 relationship between
> + * the PWM value and the actual duty cycle
> + */
> + brightness-levels = < 0 1 2 3 4 5 6 7 8 9
> + 10 11 12 13 14 15 16 17 18 19
> + 20 21 22 23 24 25 26 27 28 29
> + 30 31 32 33 34 35 36 37 38 39
> + 40 41 42 43 44 45 46 47 48 49
> + 50 51 52 53 54 55 56 57 58 59
> + 60 61 62 63 64 65 66 67 68 69
> + 70 71 72 73 74 75 76 77 78 79
> + 80 81 82 83 84 85 86 87 88 89
> + 90 91 92 93 94 95 96 97 98 99
> + 100>;
> + default-brightness-level = <50>;
> + };
> +
> + mxcfb0: fb at 2 {
> + compatible = "fsl,mxc_sdc_fb";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_disp0_2>;
> + disp_dev = "lcd";
> + interface_pix_fmt = "RGB24";
> + mode_str = "";
> + default_bpp = <32>;
> + int_clk = <1>;
> + late_init = <0>;
> + status = "okay";
> +
> + display-timings {
> + native-mode = <&ET070001DM6>;
> +
> + ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
> + clock-frequency = <33264000>;
> + hactive = <800>;
> + vactive = <480>;
> + hback-porch = <88>;
> + hsync-len = <128>;
> + hfront-porch = <40>;
> + vback-porch = <33>;
> + vsync-len = <2>;
> + vfront-porch = <10>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <1>;
> + };
> + };
> + };
> +
> + lcd: lcd at 0 {
> + compatible = "fsl,lcd";
> + ipu_id = <0>;
> + disp_id = <0>;
> + default_ifmt = "RGB24";
> + status = "okay";
> + };
> +};
> +
> +&can1 {
> + status = "disabled";
> +};
> +
> +&can2 {
> + xceiver-supply = <®_3v3>;
> +};
> +
> +&ipu2 {
> + status = "disabled";
> +};
> +
> +&kpp {
> + status = "disabled";
> +};
> +
> +®_can_xcvr {
> + status = "disabled";
> +};
> +
> +®_lcd0_pwr {
> + status = "okay";
> +};
> +
> +®_lcd1_pwr {
> + status = "okay";
> +};
> +
> +&touchscreen {
> + status = "disabled";
> +};
> diff --git a/arch/arm/boot/dts/imx6q-tx6q-10x0.dts b/arch/arm/boot/dts/imx6q-tx6q-10x0.dts
> new file mode 100644
> index 0000000..c3782af
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-tx6q-10x0.dts
> @@ -0,0 +1,191 @@
> +/*
> + * Copyright 2014 Lothar Waßmann <LW at KARO-electronics.de>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +#include "imx6q.dtsi"
> +#include "imx6qdl-tx6.dtsi"
> +
> +/ {
> + model = "Ka-Ro electronics TX6Q-1010/-1030 Module";
> + compatible = "karo,imx6q-tx6q", "fsl,imx6q";
> +
> + aliases {
> + display = &display;
> + ipu1 = &ipu1;
> + ipu2 = &ipu2;
> + };
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
> + power-supply = <®_3v3>;
> + /*
> + * a poor man's way to create a 1:1 relationship between
> + * the PWM value and the actual duty cycle
> + */
> + brightness-levels = < 0 1 2 3 4 5 6 7 8 9
> + 10 11 12 13 14 15 16 17 18 19
> + 20 21 22 23 24 25 26 27 28 29
> + 30 31 32 33 34 35 36 37 38 39
> + 40 41 42 43 44 45 46 47 48 49
> + 50 51 52 53 54 55 56 57 58 59
> + 60 61 62 63 64 65 66 67 68 69
> + 70 71 72 73 74 75 76 77 78 79
> + 80 81 82 83 84 85 86 87 88 89
> + 90 91 92 93 94 95 96 97 98 99
> + 100>;
> + default-brightness-level = <50>;
> + };
> +
> + display: display at di0 {
> + compatible = "fsl,imx-parallel-display";
> + interface-pix-fmt = "rgb24";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_disp0_1>;
> + status = "okay";
> +
> + port {
> + display0_in: endpoint {
> + remote-endpoint = <&ipu1_di0_disp0>;
> + };
> + };
> +
> + display-timings {
> + VGA {
> + clock-frequency = <25200000>;
> + hactive = <640>;
> + vactive = <480>;
> + hback-porch = <48>;
> + hsync-len = <96>;
> + hfront-porch = <16>;
> + vback-porch = <31>;
> + vsync-len = <2>;
> + vfront-porch = <12>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> +
> + ETV570 {
> + clock-frequency = <25200000>;
> + hactive = <640>;
> + vactive = <480>;
> + hback-porch = <114>;
> + hsync-len = <30>;
> + hfront-porch = <16>;
> + vback-porch = <32>;
> + vsync-len = <3>;
> + vfront-porch = <10>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> +
> + ET0350 {
> + clock-frequency = <6413760>;
> + hactive = <320>;
> + vactive = <240>;
> + hback-porch = <34>;
> + hsync-len = <34>;
> + hfront-porch = <20>;
> + vback-porch = <15>;
> + vsync-len = <3>;
> + vfront-porch = <4>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> +
> + ET0430 {
> + clock-frequency = <9009000>;
> + hactive = <480>;
> + vactive = <272>;
> + hback-porch = <2>;
> + hsync-len = <41>;
> + hfront-porch = <2>;
> + vback-porch = <2>;
> + vsync-len = <10>;
> + vfront-porch = <2>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <1>;
> + };
> +
> + ET0500 {
> + clock-frequency = <33264000>;
> + hactive = <800>;
> + vactive = <480>;
> + hback-porch = <88>;
> + hsync-len = <128>;
> + hfront-porch = <40>;
> + vback-porch = <33>;
> + vsync-len = <2>;
> + vfront-porch = <10>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> +
> + ET0700 { /* same as ET0500 */
> + clock-frequency = <33264000>;
> + hactive = <800>;
> + vactive = <480>;
> + hback-porch = <88>;
> + hsync-len = <128>;
> + hfront-porch = <40>;
> + vback-porch = <33>;
> + vsync-len = <2>;
> + vfront-porch = <10>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> +
> + ETQ570 {
> + clock-frequency = <6596040>;
> + hactive = <320>;
> + vactive = <240>;
> + hback-porch = <38>;
> + hsync-len = <30>;
> + hfront-porch = <30>;
> + vback-porch = <16>;
> + vsync-len = <3>;
> + vfront-porch = <4>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> + };
> + };
> +};
> +
> +&ipu1_di0_disp0 {
> + remote-endpoint = <&display0_in>;
> +};
> +
> +&ipu2 {
> + status = "disabled";
> +};
> +
> +®_lcd0_pwr {
> + status = "okay";
> +};
> +
> +®_lcd1_pwr {
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
> deleted file mode 100644
> index 88aa1e4..0000000
> --- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts
> +++ /dev/null
> @@ -1,154 +0,0 @@
> -/*
> - * Copyright 2014 Lothar Waßmann <LW at KARO-electronics.de>
> - *
> - * The code contained herein is licensed under the GNU General Public
> - * License. You may obtain a copy of the GNU General Public License
> - * Version 2 at the following locations:
> - *
> - * http://www.opensource.org/licenses/gpl-license.html
> - * http://www.gnu.org/copyleft/gpl.html
> - */
> -
> -/dts-v1/;
> -#include "imx6q.dtsi"
> -#include "imx6qdl-tx6.dtsi"
> -
> -/ {
> - model = "Ka-Ro electronics TX6Q-1110 Module";
> - compatible = "karo,imx6q-tx6q", "fsl,imx6q";
> -
> - aliases {
> - display = &lvds0;
> - lvds0 = &lvds0;
> - lvds1 = &lvds1;
> - };
> -
> - backlight0: backlight0 {
> - compatible = "pwm-backlight";
> - pwms = <&pwm2 0 500000 0>;
> - power-supply = <®_lcd0_pwr>;
> - /*
> - * a poor man's way to create a 1:1 relationship between
> - * the PWM value and the actual duty cycle
> - */
> - brightness-levels = < 0 1 2 3 4 5 6 7 8 9
> - 10 11 12 13 14 15 16 17 18 19
> - 20 21 22 23 24 25 26 27 28 29
> - 30 31 32 33 34 35 36 37 38 39
> - 40 41 42 43 44 45 46 47 48 49
> - 50 51 52 53 54 55 56 57 58 59
> - 60 61 62 63 64 65 66 67 68 69
> - 70 71 72 73 74 75 76 77 78 79
> - 80 81 82 83 84 85 86 87 88 89
> - 90 91 92 93 94 95 96 97 98 99
> - 100>;
> - default-brightness-level = <50>;
> - };
> -
> - backlight1: backlight1 {
> - compatible = "pwm-backlight";
> - pwms = <&pwm1 0 500000 0>;
> - power-supply = <®_lcd1_pwr>;
> - /*
> - * a poor man's way to create a 1:1 relationship between
> - * the PWM value and the actual duty cycle
> - */
> - brightness-levels = < 0 1 2 3 4 5 6 7 8 9
> - 10 11 12 13 14 15 16 17 18 19
> - 20 21 22 23 24 25 26 27 28 29
> - 30 31 32 33 34 35 36 37 38 39
> - 40 41 42 43 44 45 46 47 48 49
> - 50 51 52 53 54 55 56 57 58 59
> - 60 61 62 63 64 65 66 67 68 69
> - 70 71 72 73 74 75 76 77 78 79
> - 80 81 82 83 84 85 86 87 88 89
> - 90 91 92 93 94 95 96 97 98 99
> - 100>;
> - default-brightness-level = <50>;
> - };
> -};
> -
> -&i2c3 {
> - polytouch1: eeti at 04 {
> - compatible = "eeti,egalax_ts";
> - reg = <0x04>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_eeti>;
> - interrupt-parent = <&gpio3>;
> - interrupts = <22 0>;
> - wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
> - linux,wakeup;
> - };
> -};
> -
> -&iomuxc {
> - imx6q-tx6q-1110 {
> - pinctrl_eeti: eetigrp {
> - fsl,pins = <
> - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
> - >;
> - };
> - };
> -};
> -
> -&kpp {
> - status = "disabled"; /* pad conflict with backlight1 PWM */
> -};
> -
> -&ldb {
> - status = "okay";
> -
> - lvds0: lvds-channel at 0 {
> - fsl,data-mapping = "spwg";
> - fsl,data-width = <18>;
> - status = "okay";
> -
> - display-timings {
> - native-mode = <&lvds_timing0>;
> - lvds_timing0: hsd100pxn1 {
> - clock-frequency = <65000000>;
> - hactive = <1024>;
> - vactive = <768>;
> - hback-porch = <220>;
> - hfront-porch = <40>;
> - vback-porch = <21>;
> - vfront-porch = <7>;
> - hsync-len = <60>;
> - vsync-len = <10>;
> - de-active = <1>;
> - pixelclk-active = <1>;
> - };
> - };
> - };
> -
> - lvds1: lvds-channel at 1 {
> - fsl,data-mapping = "spwg";
> - fsl,data-width = <18>;
> - status = "disabled";
> -
> - display-timings {
> - native-mode = <&lvds_timing1>;
> - lvds_timing1: hsd100pxn1 {
> - clock-frequency = <65000000>;
> - hactive = <1024>;
> - vactive = <768>;
> - hback-porch = <220>;
> - hfront-porch = <40>;
> - vback-porch = <21>;
> - vfront-porch = <7>;
> - hsync-len = <60>;
> - vsync-len = <10>;
> - de-active = <1>;
> - pixelclk-active = <1>;
> - };
> - };
> - };
> -};
> -
> -&pwm1 {
> - status = "okay";
> -};
> -
> -&sata {
> - status = "okay";
> -};
> diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0.dts
> new file mode 100644
> index 0000000..c66524b
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-tx6q-11x0.dts
> @@ -0,0 +1,249 @@
> +/*
> + * Copyright 2014 Lothar Waßmann <LW at KARO-electronics.de>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +#include "imx6q.dtsi"
> +#include "imx6qdl-tx6.dtsi"
> +
> +/ {
> + model = "Ka-Ro electronics TX6Q-1110/-1130 Module";
> + compatible = "karo,imx6q-tx6q", "fsl,imx6q";
> +
> + aliases {
> + display = &lvds0;
> + ipu1 = &ipu2;
> + lvds0 = &lvds0;
> + lvds1 = &lvds1;
> + mxcfb0 = &lvds0;
> + mxcfb1 = &lvds1;
> + };
> +
> + backlight0: backlight0 {
> + compatible = "pwm-backlight";
> + pwms = <&pwm2 0 500000 0>;
> + /*
> + * a poor man's way to create a 1:1 relationship between
> + * the PWM value and the actual duty cycle
> + */
> + brightness-levels = < 0 1 2 3 4 5 6 7 8 9
> + 10 11 12 13 14 15 16 17 18 19
> + 20 21 22 23 24 25 26 27 28 29
> + 30 31 32 33 34 35 36 37 38 39
> + 40 41 42 43 44 45 46 47 48 49
> + 50 51 52 53 54 55 56 57 58 59
> + 60 61 62 63 64 65 66 67 68 69
> + 70 71 72 73 74 75 76 77 78 79
> + 80 81 82 83 84 85 86 87 88 89
> + 90 91 92 93 94 95 96 97 98 99
> + 100>;
> + default-brightness-level = <50>;
> + };
> +
> + backlight1: backlight1 {
> + compatible = "pwm-backlight";
> + pwms = <&pwm1 0 500000 0>;
> + /*
> + * a poor man's way to create a 1:1 relationship between
> + * the PWM value and the actual duty cycle
> + */
> + brightness-levels = < 0 1 2 3 4 5 6 7 8 9
> + 10 11 12 13 14 15 16 17 18 19
> + 20 21 22 23 24 25 26 27 28 29
> + 30 31 32 33 34 35 36 37 38 39
> + 40 41 42 43 44 45 46 47 48 49
> + 50 51 52 53 54 55 56 57 58 59
> + 60 61 62 63 64 65 66 67 68 69
> + 70 71 72 73 74 75 76 77 78 79
> + 80 81 82 83 84 85 86 87 88 89
> + 90 91 92 93 94 95 96 97 98 99
> + 100>;
> + default-brightness-level = <50>;
> + };
> +
> + lvds0: fb at 0 {
> + compatible = "fsl,mxc_sdc_fb";
> + disp_dev = "ldb";
> + interface_pix_fmt = "RGB666";
> + mode_str = "LDB-XGA";
> + default_bpp = <32>;
> + int_clk = <0>;
> + late_init = <0>;
> + fsl,data-mapping = "spwg";
> + fsl,data-width = <18>;
> + status = "okay";
> +
> + display-timings {
> + native-mode = <&lvds0_timing0>;
> +
> + lvds0_timing0: hsd100pxn1 {
> + clock-frequency = <65000000>;
> + hactive = <1024>;
> + vactive = <768>;
> + hback-porch = <220>;
> + hfront-porch = <40>;
> + vback-porch = <21>;
> + vfront-porch = <7>;
> + hsync-len = <60>;
> + vsync-len = <10>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <1>;
> + };
> +
> + lvds0_timing1: VGA {
> + clock-frequency = <25200000>;
> + hactive = <640>;
> + vactive = <480>;
> + hback-porch = <48>;
> + hfront-porch = <16>;
> + vback-porch = <31>;
> + vfront-porch = <12>;
> + hsync-len = <96>;
> + vsync-len = <2>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> +
> + lvds0_timing2: nl12880bc20 {
> + clock-frequency = <71000000>;
> + hactive = <1280>;
> + vactive = <800>;
> + hback-porch = <50>;
> + hfront-porch = <50>;
> + vback-porch = <5>;
> + vfront-porch = <5>;
> + hsync-len = <60>;
> + vsync-len = <13>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> + };
> + };
> +
> + lvds1: fb at 1 {
> + compatible = "fsl,mxc_sdc_fb";
> + disp_dev = "ldb";
> + interface_pix_fmt = "RGB666";
> + mode_str = "LDB-XGA";
> + default_bpp = <32>;
> + int_clk = <0>;
> + late_init = <0>;
> + fsl,data-mapping = "spwg";
> + fsl,data-width = <18>;
> + status = "okay";
> +
> + display-timings {
> + native-mode = <&lvds1_timing0>;
> +
> + lvds1_timing0: hsd100pxn1 {
> + clock-frequency = <65000000>;
> + hactive = <1024>;
> + vactive = <768>;
> + hback-porch = <220>;
> + hfront-porch = <40>;
> + vback-porch = <21>;
> + vfront-porch = <7>;
> + hsync-len = <60>;
> + vsync-len = <10>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> +
> + lvds1_timing1: VGA {
> + clock-frequency = <25200000>;
> + hactive = <640>;
> + vactive = <480>;
> + hback-porch = <48>;
> + hfront-porch = <16>;
> + vback-porch = <31>;
> + vfront-porch = <12>;
> + hsync-len = <96>;
> + vsync-len = <2>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> +
> + lvds1_timing2: nl12880bc20 {
> + clock-frequency = <71000000>;
> + hactive = <1280>;
> + vactive = <800>;
> + hback-porch = <50>;
> + hfront-porch = <50>;
> + vback-porch = <5>;
> + vfront-porch = <5>;
> + hsync-len = <60>;
> + vsync-len = <13>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> + };
> + };
> +};
> +
> +&i2c3 {
> + polytouch1: eeti at 04 {
> + compatible = "eeti,egalax_ts";
> + reg = <0x04>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_eeti>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <22 0>;
> + wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
> + linux,wakeup;
> + };
> +};
> +
> +&iomuxc {
> + imx6q-tx6q-11x0 {
> + pinctrl_eeti: eetigrp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
> + >;
> + };
> + };
> +};
> +
> +&ipu2 {
> + status = "disabled";
> +};
> +
> +&kpp {
> + status = "disabled"; /* pads partially clash with backlight1 PWM */
> +};
> +
> +&ldb {
> + ipu_id = <0>;
> + disp_id = <0>;
> + ext_ref = <0>;
> + mode = "sep0";
> + sec_ipu_id = <0>;
> + sec_disp_id = <1>;
> + status = "okay";
> +};
> +
> +&pwm1 {
> + status = "okay";
> +};
> +
> +&sata {
> + status = "okay";
> +};
> --
> 2.1.4
>
>
More information about the linux-arm-kernel
mailing list