[PATCH v4] clk: sunxi: Refactor A31 PLL6 so that it can be reused
Maxime Ripard
maxime.ripard at free-electrons.com
Mon Feb 1 12:20:00 PST 2016
Remove the fixed dividers from the PLL6 driver to be able to have a
reusable driver that can be used across several SoCs that share the same
controller, but don't have the same set of dividers for this clock, and to
also be reused multiple times in the same SoC, since we're droping the
clock name.
Acked-by: Chen-Yu Tsai <wens at csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
Changes from v3:
- Fixed the documentation
- Added pll6d2 back
Changes from v2:
- Rebased and converted over to the new factors refactoring. Fixed the
retrieved rate
Documentation/devicetree/bindings/clock/sunxi.txt | 2 +-
arch/arm/boot/dts/sun6i-a31.dtsi | 36 +++++++++++-----------
arch/arm/boot/dts/sun8i-a23-a33.dtsi | 25 ++++++++++-----
arch/arm/boot/dts/sun8i-a23.dtsi | 2 +-
arch/arm/boot/dts/sun8i-a33.dtsi | 4 +--
arch/arm/boot/dts/sun8i-h3.dtsi | 37 ++++++++++++++---------
drivers/clk/sunxi/clk-sunxi.c | 32 ++++++++++----------
7 files changed, 78 insertions(+), 60 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index e59f57b24777..f82850c0f6a5 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -86,7 +86,7 @@ Required properties for all clocks:
- #clock-cells : from common clock binding; shall be set to 0 except for
the following compatibles where it shall be set to 1:
"allwinner,*-gates-clk", "allwinner,sun4i-pll5-clk",
- "allwinner,sun4i-pll6-clk", "allwinner,sun6i-a31-pll6-clk",
+ "allwinner,sun4i-pll6-clk",
"allwinner,*-usb-clk", "allwinner,*-mmc-clk",
"allwinner,*-mmc-config-clk"
- clock-output-names : shall be the corresponding names of the outputs.
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index b6ad7850fac6..05fe3d1aa328 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -65,7 +65,7 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
- clocks = <&pll6 0>;
+ clocks = <&pll6>;
status = "disabled";
};
@@ -73,7 +73,7 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
- clocks = <&pll6 0>;
+ clocks = <&pll6>;
status = "disabled";
};
};
@@ -201,11 +201,11 @@
};
pll6: clk at 01c20028 {
- #clock-cells = <1>;
+ #clock-cells = <0>;
compatible = "allwinner,sun6i-a31-pll6-clk";
reg = <0x01c20028 0x4>;
clocks = <&osc24M>;
- clock-output-names = "pll6", "pll6x2";
+ clock-output-names = "pll6";
};
cpu: cpu at 01c20050 {
@@ -235,7 +235,7 @@
#clock-cells = <0>;
compatible = "allwinner,sun6i-a31-ahb1-clk";
reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
+ clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
clock-output-names = "ahb1";
/*
@@ -244,7 +244,7 @@
* controller requires AHB1 clocked from PLL6.
*/
assigned-clocks = <&ahb1>;
- assigned-clock-parents = <&pll6 0>;
+ assigned-clock-parents = <&pll6>;
};
ahb1_gates: clk at 01c20060 {
@@ -307,7 +307,7 @@
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-apb1-clk";
reg = <0x01c20058 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
+ clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
clock-output-names = "apb2";
};
@@ -331,7 +331,7 @@
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
+ clocks = <&osc24M>, <&pll6>;
clock-output-names = "mmc0",
"mmc0_output",
"mmc0_sample";
@@ -341,7 +341,7 @@
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
+ clocks = <&osc24M>, <&pll6>;
clock-output-names = "mmc1",
"mmc1_output",
"mmc1_sample";
@@ -351,7 +351,7 @@
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
+ clocks = <&osc24M>, <&pll6>;
clock-output-names = "mmc2",
"mmc2_output",
"mmc2_sample";
@@ -361,7 +361,7 @@
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c20094 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
+ clocks = <&osc24M>, <&pll6>;
clock-output-names = "mmc3",
"mmc3_output",
"mmc3_sample";
@@ -371,7 +371,7 @@
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
+ clocks = <&osc24M>, <&pll6>;
clock-output-names = "ss";
};
@@ -379,7 +379,7 @@
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
+ clocks = <&osc24M>, <&pll6>;
clock-output-names = "spi0";
};
@@ -387,7 +387,7 @@
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
+ clocks = <&osc24M>, <&pll6>;
clock-output-names = "spi1";
};
@@ -395,7 +395,7 @@
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
+ clocks = <&osc24M>, <&pll6>;
clock-output-names = "spi2";
};
@@ -403,7 +403,7 @@
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200ac 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
+ clocks = <&osc24M>, <&pll6>;
clock-output-names = "spi3";
};
@@ -1042,8 +1042,8 @@
ar100: ar100_clk {
compatible = "allwinner,sun6i-a31-ar100-clk";
#clock-cells = <0>;
- clocks = <&osc32k>, <&osc24M>, <&pll6 0>,
- <&pll6 0>;
+ clocks = <&osc32k>, <&osc24M>, <&pll6>,
+ <&pll6>;
clock-output-names = "ar100";
};
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 6f88fb0ddbc7..edc85eeaf365 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -60,7 +60,7 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
- clocks = <&pll6 0>;
+ clocks = <&pll6>;
status = "disabled";
};
};
@@ -129,11 +129,20 @@
};
pll6: clk at 01c20028 {
- #clock-cells = <1>;
+ #clock-cells = <0>;
compatible = "allwinner,sun6i-a31-pll6-clk";
reg = <0x01c20028 0x4>;
clocks = <&osc24M>;
- clock-output-names = "pll6", "pll6x2";
+ clock-output-names = "pll6";
+ };
+
+ pll6x2: pll6x2_clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <2>;
+ clocks = <&pll6>;
+ clock-output-names = "pll6-2x";
};
cpu: cpu_clk at 01c20050 {
@@ -163,7 +172,7 @@
#clock-cells = <0>;
compatible = "allwinner,sun6i-a31-ahb1-clk";
reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
+ clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
clock-output-names = "ahb1";
};
@@ -190,7 +199,7 @@
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-apb1-clk";
reg = <0x01c20058 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
+ clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
clock-output-names = "apb2";
};
@@ -213,7 +222,7 @@
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
+ clocks = <&osc24M>, <&pll6>;
clock-output-names = "mmc0",
"mmc0_output",
"mmc0_sample";
@@ -223,7 +232,7 @@
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
+ clocks = <&osc24M>, <&pll6>;
clock-output-names = "mmc1",
"mmc1_output",
"mmc1_sample";
@@ -233,7 +242,7 @@
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
+ clocks = <&osc24M>, <&pll6>;
clock-output-names = "mmc2",
"mmc2_output",
"mmc2_sample";
diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi
index 92e6616979ea..5e589c1ddda9 100644
--- a/arch/arm/boot/dts/sun8i-a23.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23.dtsi
@@ -79,7 +79,7 @@
#clock-cells = <0>;
compatible = "allwinner,sun8i-a23-mbus-clk";
reg = <0x01c2015c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5>;
+ clocks = <&osc24M>, <&pll6x2>, <&pll5>;
clock-output-names = "mbus";
};
};
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 001d8402ca18..f3eb618bcfa7 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -103,7 +103,7 @@
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
+ clocks = <&osc24M>, <&pll6>;
clock-output-names = "ss";
};
@@ -111,7 +111,7 @@
#clock-cells = <0>;
compatible = "allwinner,sun8i-a23-mbus-clk";
reg = <0x01c2015c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5>, <&pll11>;
+ clocks = <&osc24M>, <&pll6x2>, <&pll5>, <&pll11>;
clock-output-names = "mbus";
};
};
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 1524130e43c9..6f6b4e469ac9 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -121,11 +121,11 @@
};
pll6: clk at 01c20028 {
- #clock-cells = <1>;
+ #clock-cells = <0>;
compatible = "allwinner,sun6i-a31-pll6-clk";
reg = <0x01c20028 0x4>;
clocks = <&osc24M>;
- clock-output-names = "pll6", "pll6x2";
+ clock-output-names = "pll6";
};
pll6d2: pll6d2_clk {
@@ -133,15 +133,24 @@
compatible = "fixed-factor-clock";
clock-div = <2>;
clock-mult = <1>;
- clocks = <&pll6 0>;
- clock-output-names = "pll6d2";
+ clocks = <&pll6>;
+ clock-output-names = "pll6-d2";
};
- /* dummy clock until pll6 can be reused */
- pll8: pll8_clk {
+ pll6x2: pll6x2_clk {
#clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <1>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <2>;
+ clocks = <&pll6>;
+ clock-output-names = "pll6-2x";
+ };
+
+ pll8: clk at 01c20044 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun6i-a31-pll6-clk";
+ reg = <0x01c20044 0x4>;
+ clocks = <&osc24M>;
clock-output-names = "pll8";
};
@@ -165,7 +174,7 @@
#clock-cells = <0>;
compatible = "allwinner,sun6i-a31-ahb1-clk";
reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
+ clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
clock-output-names = "ahb1";
};
@@ -189,7 +198,7 @@
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-apb1-clk";
reg = <0x01c20058 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
+ clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
clock-output-names = "apb2";
};
@@ -243,7 +252,7 @@
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 0>, <&pll8>;
+ clocks = <&osc24M>, <&pll6>, <&pll8>;
clock-output-names = "mmc0",
"mmc0_output",
"mmc0_sample";
@@ -253,7 +262,7 @@
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 0>, <&pll8>;
+ clocks = <&osc24M>, <&pll6>, <&pll8>;
clock-output-names = "mmc1",
"mmc1_output",
"mmc1_sample";
@@ -263,7 +272,7 @@
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 0>, <&pll8>;
+ clocks = <&osc24M>, <&pll6>, <&pll8>;
clock-output-names = "mmc2",
"mmc2_output",
"mmc2_sample";
@@ -273,7 +282,7 @@
#clock-cells = <0>;
compatible = "allwinner,sun8i-a23-mbus-clk";
reg = <0x01c2015c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5>;
+ clocks = <&osc24M>, <&pll6x2>, <&pll5>;
clock-output-names = "mbus";
};
};
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index da15f2b12ab2..4de800e379d3 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -227,9 +227,9 @@ static void sun4i_get_pll5_factors(struct factors_request *req)
}
/**
- * sun6i_a31_get_pll6_factors() - calculates n, k factors for A31 PLL6x2
- * PLL6x2 rate is calculated as follows
- * rate = parent_rate * (n + 1) * (k + 1)
+ * sun6i_a31_get_pll6_factors() - calculates n, k factors for A31 PLL6
+ * PLL6 rate is calculated as follows
+ * rate = parent_rate * (n + 1) * (k + 1) / 2
* parent_rate is always 24Mhz
*/
@@ -238,8 +238,8 @@ static void sun6i_a31_get_pll6_factors(struct factors_request *req)
u8 div;
/* Normalize value to a parent_rate multiple (24M) */
- div = req->rate / req->parent_rate;
- req->rate = req->parent_rate * div;
+ div = req->rate / (req->parent_rate / 2);
+ req->rate = (req->parent_rate / 2) * div;
req->k = div / 32;
if (req->k > 3)
@@ -248,6 +248,15 @@ static void sun6i_a31_get_pll6_factors(struct factors_request *req)
req->n = DIV_ROUND_UP(div, (req->k + 1)) - 1;
}
+static void sun6i_a31_pll6_recalc(struct factors_request *req)
+{
+ req->rate = req->parent_rate;
+
+ req->rate *= req->n + 1;
+ req->rate *= req->k + 1;
+ req->rate /= 2;
+}
+
/**
* sun5i_a13_get_ahb_factors() - calculates m, p factors for AHB
* AHB rate is calculated as follows
@@ -537,7 +546,7 @@ static const struct factors_data sun6i_a31_pll6_data __initconst = {
.enable = 31,
.table = &sun6i_a31_pll6_config,
.getter = sun6i_a31_get_pll6_factors,
- .name = "pll6x2",
+ .recalc = sun6i_a31_pll6_recalc,
};
static const struct factors_data sun5i_a13_ahb_data __initconst = {
@@ -788,15 +797,6 @@ static const struct divs_data pll6_divs_data __initconst = {
}
};
-static const struct divs_data sun6i_a31_pll6_divs_data __initconst = {
- .factors = &sun6i_a31_pll6_data,
- .ndivs = 2,
- .div = {
- { .fixed = 2 }, /* normal output */
- { .self = 1 }, /* base factor clock, 2x */
- }
-};
-
/**
* sunxi_divs_clk_setup() - Setup function for leaf divisors on clocks
*
@@ -938,6 +938,7 @@ free_clkdata:
static const struct of_device_id clk_factors_match[] __initconst = {
{.compatible = "allwinner,sun4i-a10-pll1-clk", .data = &sun4i_pll1_data,},
{.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,},
+ {.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_data,},
{.compatible = "allwinner,sun8i-a23-pll1-clk", .data = &sun8i_a23_pll1_data,},
{.compatible = "allwinner,sun7i-a20-pll4-clk", .data = &sun7i_a20_pll4_data,},
{.compatible = "allwinner,sun5i-a13-ahb-clk", .data = &sun5i_a13_ahb_data,},
@@ -959,7 +960,6 @@ static const struct of_device_id clk_div_match[] __initconst = {
static const struct of_device_id clk_divs_match[] __initconst = {
{.compatible = "allwinner,sun4i-a10-pll5-clk", .data = &pll5_divs_data,},
{.compatible = "allwinner,sun4i-a10-pll6-clk", .data = &pll6_divs_data,},
- {.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_divs_data,},
{}
};
--
2.6.4
More information about the linux-arm-kernel
mailing list