[PATCH v2 02/21] arm64: Allow the arch timer to use the HYP timer
Marc Zyngier
marc.zyngier at arm.com
Mon Feb 1 05:42:34 PST 2016
On 01/02/16 12:29, Christoffer Dall wrote:
> On Mon, Jan 25, 2016 at 03:53:36PM +0000, Marc Zyngier wrote:
>> With the ARMv8.1 VHE, the kernel can run in HYP mode, and thus
>> use the HYP timer instead of the normal guest timer in a mostly
>> transparent way, except for the interrupt line.
>>
>> This patch reworks the arch timer code to allow the selection of
>> the HYP PPI, possibly falling back to the guest timer if not
>> available.
>>
>> Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
>> ---
>> drivers/clocksource/arm_arch_timer.c | 96 ++++++++++++++++++++++--------------
>> 1 file changed, 59 insertions(+), 37 deletions(-)
>>
>> diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
>> index c64d543..ffe9d1c 100644
>> --- a/drivers/clocksource/arm_arch_timer.c
>> +++ b/drivers/clocksource/arm_arch_timer.c
>> @@ -67,7 +67,7 @@ static int arch_timer_ppi[MAX_TIMER_PPI];
>>
>> static struct clock_event_device __percpu *arch_timer_evt;
>>
>> -static bool arch_timer_use_virtual = true;
>> +static enum ppi_nr arch_timer_uses_ppi = VIRT_PPI;
>> static bool arch_timer_c3stop;
>> static bool arch_timer_mem_use_virtual;
>>
>> @@ -263,14 +263,20 @@ static void __arch_timer_setup(unsigned type,
>> clk->name = "arch_sys_timer";
>> clk->rating = 450;
>> clk->cpumask = cpumask_of(smp_processor_id());
>> - if (arch_timer_use_virtual) {
>> - clk->irq = arch_timer_ppi[VIRT_PPI];
>> + clk->irq = arch_timer_ppi[arch_timer_uses_ppi];
>> + switch (arch_timer_uses_ppi) {
>> + case VIRT_PPI:
>> clk->set_state_shutdown = arch_timer_shutdown_virt;
>> clk->set_next_event = arch_timer_set_next_event_virt;
>> - } else {
>> - clk->irq = arch_timer_ppi[PHYS_SECURE_PPI];
>> + break;
>> + case PHYS_SECURE_PPI:
>> + case PHYS_NONSECURE_PPI:
>> + case HYP_PPI:
>> clk->set_state_shutdown = arch_timer_shutdown_phys;
>> clk->set_next_event = arch_timer_set_next_event_phys;
>> + break;
>> + default:
>> + BUG();
>> }
>> } else {
>> clk->features |= CLOCK_EVT_FEAT_DYNIRQ;
>> @@ -338,17 +344,20 @@ static void arch_counter_set_user_access(void)
>> arch_timer_set_cntkctl(cntkctl);
>> }
>>
>> +static bool arch_timer_has_nonsecure_ppi(void)
>> +{
>> + return (arch_timer_uses_ppi == PHYS_SECURE_PPI &&
>> + arch_timer_ppi[PHYS_NONSECURE_PPI]);
>> +}
>> +
>> static int arch_timer_setup(struct clock_event_device *clk)
>> {
>> __arch_timer_setup(ARCH_CP15_TIMER, clk);
>>
>> - if (arch_timer_use_virtual)
>> - enable_percpu_irq(arch_timer_ppi[VIRT_PPI], 0);
>> - else {
>> - enable_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI], 0);
>> - if (arch_timer_ppi[PHYS_NONSECURE_PPI])
>> - enable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI], 0);
>> - }
>> + enable_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi], 0);
>> +
>> + if (arch_timer_has_nonsecure_ppi())
>> + enable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI], 0);
>>
>> arch_counter_set_user_access();
>> if (IS_ENABLED(CONFIG_ARM_ARCH_TIMER_EVTSTREAM))
>> @@ -390,7 +399,7 @@ static void arch_timer_banner(unsigned type)
>> (unsigned long)arch_timer_rate / 1000000,
>> (unsigned long)(arch_timer_rate / 10000) % 100,
>> type & ARCH_CP15_TIMER ?
>> - arch_timer_use_virtual ? "virt" : "phys" :
>> + (arch_timer_uses_ppi == VIRT_PPI) ? "virt" : "phys" :
>> "",
>> type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? "/" : "",
>> type & ARCH_MEM_TIMER ?
>> @@ -460,7 +469,7 @@ static void __init arch_counter_register(unsigned type)
>>
>> /* Register the CP15 based counter if we have one */
>> if (type & ARCH_CP15_TIMER) {
>> - if (IS_ENABLED(CONFIG_ARM64) || arch_timer_use_virtual)
>> + if (IS_ENABLED(CONFIG_ARM64) || arch_timer_uses_ppi == VIRT_PPI)
>> arch_timer_read_counter = arch_counter_get_cntvct;
>> else
>> arch_timer_read_counter = arch_counter_get_cntpct;
>> @@ -490,13 +499,9 @@ static void arch_timer_stop(struct clock_event_device *clk)
>> pr_debug("arch_timer_teardown disable IRQ%d cpu #%d\n",
>> clk->irq, smp_processor_id());
>>
>> - if (arch_timer_use_virtual)
>> - disable_percpu_irq(arch_timer_ppi[VIRT_PPI]);
>> - else {
>> - disable_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI]);
>> - if (arch_timer_ppi[PHYS_NONSECURE_PPI])
>> - disable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI]);
>> - }
>> + disable_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi]);
>> + if (arch_timer_has_nonsecure_ppi())
>> + disable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI]);
>>
>> clk->set_state_shutdown(clk);
>> }
>> @@ -562,12 +567,14 @@ static int __init arch_timer_register(void)
>> goto out;
>> }
>>
>> - if (arch_timer_use_virtual) {
>> - ppi = arch_timer_ppi[VIRT_PPI];
>> + ppi = arch_timer_ppi[arch_timer_uses_ppi];
>> + switch (arch_timer_uses_ppi) {
>> + case VIRT_PPI:
>> err = request_percpu_irq(ppi, arch_timer_handler_virt,
>> "arch_timer", arch_timer_evt);
>> - } else {
>> - ppi = arch_timer_ppi[PHYS_SECURE_PPI];
>> + break;
>> + case PHYS_SECURE_PPI:
>> + case PHYS_NONSECURE_PPI:
>> err = request_percpu_irq(ppi, arch_timer_handler_phys,
>> "arch_timer", arch_timer_evt);
>> if (!err && arch_timer_ppi[PHYS_NONSECURE_PPI]) {
>> @@ -578,6 +585,13 @@ static int __init arch_timer_register(void)
>> free_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI],
>> arch_timer_evt);
>> }
>> + break;
>> + case HYP_PPI:
>> + err = request_percpu_irq(ppi, arch_timer_handler_phys,
>> + "arch_timer", arch_timer_evt);
>> + break;
>> + default:
>> + BUG();
>> }
>>
>> if (err) {
>> @@ -602,15 +616,10 @@ static int __init arch_timer_register(void)
>> out_unreg_notify:
>> unregister_cpu_notifier(&arch_timer_cpu_nb);
>> out_free_irq:
>> - if (arch_timer_use_virtual)
>> - free_percpu_irq(arch_timer_ppi[VIRT_PPI], arch_timer_evt);
>> - else {
>> - free_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI],
>> + free_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi], arch_timer_evt);
>> + if (arch_timer_has_nonsecure_ppi())
>> + free_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI],
>> arch_timer_evt);
>> - if (arch_timer_ppi[PHYS_NONSECURE_PPI])
>> - free_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI],
>> - arch_timer_evt);
>> - }
>>
>> out_free:
>> free_percpu(arch_timer_evt);
>> @@ -697,12 +706,25 @@ static void __init arch_timer_init(void)
>> *
>> * If no interrupt provided for virtual timer, we'll have to
>> * stick to the physical timer. It'd better be accessible...
>> + *
>> + * On ARMv8.1 with VH extensions, the kernel runs in HYP. VHE
>> + * accesses to CNTP_*_EL1 registers are silently redirected to
>> + * their CNTHP_*_EL2 counterparts, and use a different PPI
>> + * number.
>> */
>> if (is_hyp_mode_available() || !arch_timer_ppi[VIRT_PPI]) {
>> - arch_timer_use_virtual = false;
>> + bool has_ppi;
>> +
>> + if (is_kernel_in_hyp_mode()) {
>> + arch_timer_uses_ppi = HYP_PPI;
>> + has_ppi = !!arch_timer_ppi[HYP_PPI];
>> + } else {
>> + arch_timer_uses_ppi = PHYS_SECURE_PPI;
>> + has_ppi = (!!arch_timer_ppi[PHYS_SECURE_PPI] ||
>> + !!arch_timer_ppi[PHYS_NONSECURE_PPI]);
>
> shouldn't this simply test the PHYS_SECURE_PPI since otherwise you could
> potentially have the PHYS_NONSECURE_PPI but not PHYS_SECURE_PPI and
> you'll try to request IRQ 0 for this later... ?
I don't really see how you could have the non-secure PPI, but not the
secure one, as the binding doesn't give you opportunity to do so (the
first interrupt is the secure one, then the non-secure one...).
Thanks,
M.
--
Jazz is not dead. It just smells funny...
More information about the linux-arm-kernel
mailing list