[PATCH v2 05/21] arm64: KVM: VHE: Turn VTCR_EL2 setup into a reusable macro

[Christoffer Dall]

On Mon, Jan 25, 2016 at 03:53:39PM +0000, Marc Zyngier wrote:
> On a VHE-capable system, there is no point in setting VTCR_EL2
> at KVM init time. We can perfectly set it up when the kernel
> boots, removing the need for a more complicated configuration.

what's the complicated configuration which is avoided?

> 
> In order to allow this, turn VTCR_EL2 setup into a macro that
> we'll be able to reuse at boot time.
> 
> Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
> ---
>  arch/arm64/include/asm/kvm_mmu.h | 23 +++++++++++++++++++++++
>  arch/arm64/kvm/hyp-init.S        | 18 +-----------------
>  2 files changed, 24 insertions(+), 17 deletions(-)
> 
> diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
> index 7364339..d3e6d7b 100644
> --- a/arch/arm64/include/asm/kvm_mmu.h
> +++ b/arch/arm64/include/asm/kvm_mmu.h
> @@ -56,6 +56,29 @@
>  
>  #ifdef __ASSEMBLY__
>  
> +#include <asm/kvm_arm.h>
> +
> +.macro setup_vtcr tmp1, tmp2
> +	mov	\tmp1, #(VTCR_EL2_FLAGS & 0xffff)
> +	movk	\tmp1, #(VTCR_EL2_FLAGS >> 16), lsl #16
> +	/*
> +	 * Read the PARange bits from ID_AA64MMFR0_EL1 and set the PS bits in
> +	 * VTCR_EL2.
> +	 */
> +	mrs	\tmp2, id_aa64mmfr0_el1
> +	bfi	\tmp1, \tmp2, #16, #3
> +	/*
> +	 * Read the VMIDBits bits from ID_AA64MMFR1_EL1 and set the VS bit in
> +	 * VTCR_EL2.
> +	 */
> +	mrs	\tmp2, ID_AA64MMFR1_EL1
> +	ubfx	\tmp2, \tmp2, #5, #1
> +	lsl	\tmp2, \tmp2, #VTCR_EL2_VS
> +	orr	\tmp1, \tmp1, \tmp2
> +
> +	msr	vtcr_el2, \tmp1
> +	isb
> +.endm

this feels like an awful lot of code in a header file.

Is it crazy to imagine wanting to have different T0SZ for different VMs
in the future?  In that case, the T0SZ stuff should stay in KVM...

Thanks,
-Christoffer

>  /*
>   * Convert a kernel VA into a HYP VA.
>   * reg: VA to be converted.
> diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S
> index 3e568dc..4143e2c 100644
> --- a/arch/arm64/kvm/hyp-init.S
> +++ b/arch/arm64/kvm/hyp-init.S
> @@ -87,23 +87,7 @@ __do_hyp_init:
>  #endif
>  	msr	tcr_el2, x4
>  
> -	ldr	x4, =VTCR_EL2_FLAGS
> -	/*
> -	 * Read the PARange bits from ID_AA64MMFR0_EL1 and set the PS bits in
> -	 * VTCR_EL2.
> -	 */
> -	mrs	x5, ID_AA64MMFR0_EL1
> -	bfi	x4, x5, #16, #3
> -	/*
> -	 * Read the VMIDBits bits from ID_AA64MMFR1_EL1 and set the VS bit in
> -	 * VTCR_EL2.
> -	 */
> -	mrs	x5, ID_AA64MMFR1_EL1
> -	ubfx	x5, x5, #5, #1
> -	lsl	x5, x5, #VTCR_EL2_VS
> -	orr	x4, x4, x5
> -
> -	msr	vtcr_el2, x4
> +	setup_vtcr x4, x5
>  
>  	mrs	x4, mair_el1
>  	msr	mair_el2, x4
> -- 
> 2.1.4
>