[RFC PATCH] irq/mbigen:Fix the problem of IO remap for duplicated physical address in mbigen driver

[MaJun]

From: Ma Jun <majun258 at huawei.com>

For mbigen module, there is a special case that more than one mbigen 
device nodes use the same reg definition in DTS when these devices
exist in the same mbigen hardware module. 

mbigen_dev1:intc_dev1 {
	...
	reg = <0x0 0xc0080000 0x0 0x10000>;
	...
};

mbigen_dev2:intc_dev2 {
	...
	reg = <0x0 0xc0080000 0x0 0x10000>;
	...
};

On this case, devm_ioremap_resource() returns fail with info
"can't request region for resource" because of memory region check.

Because we only need to program 1 into corresponding bit into status 
register of mbigen to clear the interrupt status during runtime,
I think we can replace devm_ioremap_resource() by devm_ioremap().

Signed-off-by: Ma Jun <majun258 at huawei.com>
---
 drivers/irqchip/irq-mbigen.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c
index 4dd3eb8..b19e528 100644
--- a/drivers/irqchip/irq-mbigen.c
+++ b/drivers/irqchip/irq-mbigen.c
@@ -250,7 +250,7 @@ static int mbigen_device_probe(struct platform_device *pdev)
 	mgn_chip->pdev = pdev;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	mgn_chip->base = devm_ioremap_resource(&pdev->dev, res);
+	mgn_chip->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
 	if (IS_ERR(mgn_chip->base))
 		return PTR_ERR(mgn_chip->base);
 
-- 
1.7.1