[PATCH v2] ARM: dts: qcom: apq8064: Add missing scm clock

[Bjorn Andersson]

As per the device tree binding the apq8064 scm node requires the core
clock to be specified, so add this.

Signed-off-by: Bjorn Andersson <bjorn.andersson at linaro.org>
---

Changes since v1:
- Changed clock to Daytona Fabric

 arch/arm/boot/dts/qcom-apq8064.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 1dbe697b2e90..a27cc96ac069 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -4,6 +4,7 @@
 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
 #include <dt-bindings/reset/qcom,gcc-msm8960.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -303,6 +304,9 @@
 	firmware {
 		scm {
 			compatible = "qcom,scm-apq8064";
+
+			clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
+			clock-names = "core";
 		};
 	};
 
-- 
2.11.0