[PATCH 3/4] ARM64: dts: TM2: comply to the samsung pinctrl naming convention
Andi Shyti
andi.shyti at samsung.com
Thu Dec 29 00:42:10 PST 2016
Change the PIN() macro definition so that it can use the macros
from pinctrl/samsung.h header file.
Signed-off-by: Andi Shyti <andi.shyti at samsung.com>
---
arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 12 +-
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 254 ++++++++++-----------
2 files changed, 133 insertions(+), 133 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
index 36da7dce409a..9afed9fcf7e1 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
@@ -27,12 +27,12 @@
#define PIN_OUT 1
#define PIN_FUNC1 2
-#define PIN(_func, _pin, _pull, _drv) \
- _pin { \
- samsung,pins = #_pin; \
- samsung,pin-function = <PIN_ ##_func>; \
- samsung,pin-pud = <PIN_PULL_ ##_pull>; \
- samsung,pin-drv = <PIN_DRV_ ##_drv>; \
+#define PIN(_func, _pin, _pull, _drv) \
+ _pin { \
+ samsung,pins = #_pin; \
+ samsung,pin-function = <EXYNOS_PIN_FUNC_ ##_func>; \
+ samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>; \
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_ ##_drv>; \
}
&pinctrl_alive {
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index f21bdc2ff834..a2bc8e48eca4 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -742,77 +742,77 @@
pinctrl-0 = <&initial_alive>;
initial_alive: initial-state {
- PIN(IN, gpa0-0, DOWN, LV1);
- PIN(IN, gpa0-1, NONE, LV1);
- PIN(IN, gpa0-2, DOWN, LV1);
- PIN(IN, gpa0-3, NONE, LV1);
- PIN(IN, gpa0-4, NONE, LV1);
- PIN(IN, gpa0-5, DOWN, LV1);
- PIN(IN, gpa0-6, NONE, LV1);
- PIN(IN, gpa0-7, NONE, LV1);
-
- PIN(IN, gpa1-0, UP, LV1);
- PIN(IN, gpa1-1, NONE, LV1);
- PIN(IN, gpa1-2, NONE, LV1);
- PIN(IN, gpa1-3, DOWN, LV1);
- PIN(IN, gpa1-4, DOWN, LV1);
- PIN(IN, gpa1-5, NONE, LV1);
- PIN(IN, gpa1-6, NONE, LV1);
- PIN(IN, gpa1-7, NONE, LV1);
-
- PIN(IN, gpa2-0, NONE, LV1);
- PIN(IN, gpa2-1, NONE, LV1);
- PIN(IN, gpa2-2, NONE, LV1);
- PIN(IN, gpa2-3, DOWN, LV1);
- PIN(IN, gpa2-4, NONE, LV1);
- PIN(IN, gpa2-5, DOWN, LV1);
- PIN(IN, gpa2-6, DOWN, LV1);
- PIN(IN, gpa2-7, NONE, LV1);
-
- PIN(IN, gpa3-0, DOWN, LV1);
- PIN(IN, gpa3-1, DOWN, LV1);
- PIN(IN, gpa3-2, NONE, LV1);
- PIN(IN, gpa3-3, DOWN, LV1);
- PIN(IN, gpa3-4, NONE, LV1);
- PIN(IN, gpa3-5, DOWN, LV1);
- PIN(IN, gpa3-6, DOWN, LV1);
- PIN(IN, gpa3-7, DOWN, LV1);
-
- PIN(IN, gpf1-0, NONE, LV1);
- PIN(IN, gpf1-1, NONE, LV1);
- PIN(IN, gpf1-2, DOWN, LV1);
- PIN(IN, gpf1-4, UP, LV1);
- PIN(OUT, gpf1-5, NONE, LV1);
- PIN(IN, gpf1-6, DOWN, LV1);
- PIN(IN, gpf1-7, DOWN, LV1);
-
- PIN(IN, gpf2-0, DOWN, LV1);
- PIN(IN, gpf2-1, DOWN, LV1);
- PIN(IN, gpf2-2, DOWN, LV1);
- PIN(IN, gpf2-3, DOWN, LV1);
-
- PIN(IN, gpf3-0, DOWN, LV1);
- PIN(IN, gpf3-1, DOWN, LV1);
- PIN(IN, gpf3-2, NONE, LV1);
- PIN(IN, gpf3-3, DOWN, LV1);
-
- PIN(IN, gpf4-0, DOWN, LV1);
- PIN(IN, gpf4-1, DOWN, LV1);
- PIN(IN, gpf4-2, DOWN, LV1);
- PIN(IN, gpf4-3, DOWN, LV1);
- PIN(IN, gpf4-4, DOWN, LV1);
- PIN(IN, gpf4-5, DOWN, LV1);
- PIN(IN, gpf4-6, DOWN, LV1);
- PIN(IN, gpf4-7, DOWN, LV1);
-
- PIN(IN, gpf5-0, DOWN, LV1);
- PIN(IN, gpf5-1, DOWN, LV1);
- PIN(IN, gpf5-2, DOWN, LV1);
- PIN(IN, gpf5-3, DOWN, LV1);
- PIN(OUT, gpf5-4, NONE, LV1);
- PIN(IN, gpf5-5, DOWN, LV1);
- PIN(IN, gpf5-6, DOWN, LV1);
- PIN(IN, gpf5-7, DOWN, LV1);
+ PIN(INPUT, gpa0-0, DOWN, LV1);
+ PIN(INPUT, gpa0-1, NONE, LV1);
+ PIN(INPUT, gpa0-2, DOWN, LV1);
+ PIN(INPUT, gpa0-3, NONE, LV1);
+ PIN(INPUT, gpa0-4, NONE, LV1);
+ PIN(INPUT, gpa0-5, DOWN, LV1);
+ PIN(INPUT, gpa0-6, NONE, LV1);
+ PIN(INPUT, gpa0-7, NONE, LV1);
+
+ PIN(INPUT, gpa1-0, UP, LV1);
+ PIN(INPUT, gpa1-1, NONE, LV1);
+ PIN(INPUT, gpa1-2, NONE, LV1);
+ PIN(INPUT, gpa1-3, DOWN, LV1);
+ PIN(INPUT, gpa1-4, DOWN, LV1);
+ PIN(INPUT, gpa1-5, NONE, LV1);
+ PIN(INPUT, gpa1-6, NONE, LV1);
+ PIN(INPUT, gpa1-7, NONE, LV1);
+
+ PIN(INPUT, gpa2-0, NONE, LV1);
+ PIN(INPUT, gpa2-1, NONE, LV1);
+ PIN(INPUT, gpa2-2, NONE, LV1);
+ PIN(INPUT, gpa2-3, DOWN, LV1);
+ PIN(INPUT, gpa2-4, NONE, LV1);
+ PIN(INPUT, gpa2-5, DOWN, LV1);
+ PIN(INPUT, gpa2-6, DOWN, LV1);
+ PIN(INPUT, gpa2-7, NONE, LV1);
+
+ PIN(INPUT, gpa3-0, DOWN, LV1);
+ PIN(INPUT, gpa3-1, DOWN, LV1);
+ PIN(INPUT, gpa3-2, NONE, LV1);
+ PIN(INPUT, gpa3-3, DOWN, LV1);
+ PIN(INPUT, gpa3-4, NONE, LV1);
+ PIN(INPUT, gpa3-5, DOWN, LV1);
+ PIN(INPUT, gpa3-6, DOWN, LV1);
+ PIN(INPUT, gpa3-7, DOWN, LV1);
+
+ PIN(INPUT, gpf1-0, NONE, LV1);
+ PIN(INPUT, gpf1-1, NONE, LV1);
+ PIN(INPUT, gpf1-2, DOWN, LV1);
+ PIN(INPUT, gpf1-4, UP, LV1);
+ PIN(OUTPUT, gpf1-5, NONE, LV1);
+ PIN(INPUT, gpf1-6, DOWN, LV1);
+ PIN(INPUT, gpf1-7, DOWN, LV1);
+
+ PIN(INPUT, gpf2-0, DOWN, LV1);
+ PIN(INPUT, gpf2-1, DOWN, LV1);
+ PIN(INPUT, gpf2-2, DOWN, LV1);
+ PIN(INPUT, gpf2-3, DOWN, LV1);
+
+ PIN(INPUT, gpf3-0, DOWN, LV1);
+ PIN(INPUT, gpf3-1, DOWN, LV1);
+ PIN(INPUT, gpf3-2, NONE, LV1);
+ PIN(INPUT, gpf3-3, DOWN, LV1);
+
+ PIN(INPUT, gpf4-0, DOWN, LV1);
+ PIN(INPUT, gpf4-1, DOWN, LV1);
+ PIN(INPUT, gpf4-2, DOWN, LV1);
+ PIN(INPUT, gpf4-3, DOWN, LV1);
+ PIN(INPUT, gpf4-4, DOWN, LV1);
+ PIN(INPUT, gpf4-5, DOWN, LV1);
+ PIN(INPUT, gpf4-6, DOWN, LV1);
+ PIN(INPUT, gpf4-7, DOWN, LV1);
+
+ PIN(INPUT, gpf5-0, DOWN, LV1);
+ PIN(INPUT, gpf5-1, DOWN, LV1);
+ PIN(INPUT, gpf5-2, DOWN, LV1);
+ PIN(INPUT, gpf5-3, DOWN, LV1);
+ PIN(OUTPUT, gpf5-4, NONE, LV1);
+ PIN(INPUT, gpf5-5, DOWN, LV1);
+ PIN(INPUT, gpf5-6, DOWN, LV1);
+ PIN(INPUT, gpf5-7, DOWN, LV1);
};
te_irq: te_irq {
@@ -826,8 +826,8 @@
pinctrl-0 = <&initial_cpif>;
initial_cpif: initial-state {
- PIN(IN, gpv6-0, DOWN, LV1);
- PIN(IN, gpv6-1, DOWN, LV1);
+ PIN(INPUT, gpv6-0, DOWN, LV1);
+ PIN(INPUT, gpv6-1, DOWN, LV1);
};
};
@@ -836,9 +836,9 @@
pinctrl-0 = <&initial_ese>;
initial_ese: initial-state {
- PIN(IN, gpj2-0, DOWN, LV1);
- PIN(IN, gpj2-1, DOWN, LV1);
- PIN(IN, gpj2-2, DOWN, LV1);
+ PIN(INPUT, gpj2-0, DOWN, LV1);
+ PIN(INPUT, gpj2-1, DOWN, LV1);
+ PIN(INPUT, gpj2-2, DOWN, LV1);
};
};
@@ -847,11 +847,11 @@
pinctrl-0 = <&initial_fsys>;
initial_fsys: initial-state {
- PIN(IN, gpr3-0, NONE, LV1);
- PIN(IN, gpr3-1, DOWN, LV1);
- PIN(IN, gpr3-2, DOWN, LV1);
- PIN(IN, gpr3-3, DOWN, LV1);
- PIN(IN, gpr3-7, NONE, LV1);
+ PIN(INPUT, gpr3-0, NONE, LV1);
+ PIN(INPUT, gpr3-1, DOWN, LV1);
+ PIN(INPUT, gpr3-2, DOWN, LV1);
+ PIN(INPUT, gpr3-3, DOWN, LV1);
+ PIN(INPUT, gpr3-7, NONE, LV1);
};
};
@@ -860,14 +860,14 @@
pinctrl-0 = <&initial_imem>;
initial_imem: initial-state {
- PIN(IN, gpf0-0, UP, LV1);
- PIN(IN, gpf0-1, UP, LV1);
- PIN(IN, gpf0-2, DOWN, LV1);
- PIN(IN, gpf0-3, UP, LV1);
- PIN(IN, gpf0-4, DOWN, LV1);
- PIN(IN, gpf0-5, NONE, LV1);
- PIN(IN, gpf0-6, DOWN, LV1);
- PIN(IN, gpf0-7, UP, LV1);
+ PIN(INPUT, gpf0-0, UP, LV1);
+ PIN(INPUT, gpf0-1, UP, LV1);
+ PIN(INPUT, gpf0-2, DOWN, LV1);
+ PIN(INPUT, gpf0-3, UP, LV1);
+ PIN(INPUT, gpf0-4, DOWN, LV1);
+ PIN(INPUT, gpf0-5, NONE, LV1);
+ PIN(INPUT, gpf0-6, DOWN, LV1);
+ PIN(INPUT, gpf0-7, UP, LV1);
};
};
@@ -876,7 +876,7 @@
pinctrl-0 = <&initial_nfc>;
initial_nfc: initial-state {
- PIN(IN, gpj0-2, DOWN, LV1);
+ PIN(INPUT, gpj0-2, DOWN, LV1);
};
};
@@ -885,54 +885,54 @@
pinctrl-0 = <&initial_peric>;
initial_peric: initial-state {
- PIN(IN, gpv7-0, DOWN, LV1);
- PIN(IN, gpv7-1, DOWN, LV1);
- PIN(IN, gpv7-2, NONE, LV1);
- PIN(IN, gpv7-3, DOWN, LV1);
- PIN(IN, gpv7-4, DOWN, LV1);
- PIN(IN, gpv7-5, DOWN, LV1);
+ PIN(INPUT, gpv7-0, DOWN, LV1);
+ PIN(INPUT, gpv7-1, DOWN, LV1);
+ PIN(INPUT, gpv7-2, NONE, LV1);
+ PIN(INPUT, gpv7-3, DOWN, LV1);
+ PIN(INPUT, gpv7-4, DOWN, LV1);
+ PIN(INPUT, gpv7-5, DOWN, LV1);
- PIN(IN, gpb0-4, DOWN, LV1);
+ PIN(INPUT, gpb0-4, DOWN, LV1);
- PIN(IN, gpc0-2, DOWN, LV1);
- PIN(IN, gpc0-5, DOWN, LV1);
- PIN(IN, gpc0-7, DOWN, LV1);
+ PIN(INPUT, gpc0-2, DOWN, LV1);
+ PIN(INPUT, gpc0-5, DOWN, LV1);
+ PIN(INPUT, gpc0-7, DOWN, LV1);
- PIN(IN, gpc1-1, DOWN, LV1);
+ PIN(INPUT, gpc1-1, DOWN, LV1);
- PIN(IN, gpc3-4, NONE, LV1);
- PIN(IN, gpc3-5, NONE, LV1);
- PIN(IN, gpc3-6, NONE, LV1);
- PIN(IN, gpc3-7, NONE, LV1);
+ PIN(INPUT, gpc3-4, NONE, LV1);
+ PIN(INPUT, gpc3-5, NONE, LV1);
+ PIN(INPUT, gpc3-6, NONE, LV1);
+ PIN(INPUT, gpc3-7, NONE, LV1);
- PIN(OUT, gpg0-0, NONE, LV1);
- PIN(FUNC1, gpg0-1, DOWN, LV1);
+ PIN(OUTPUT, gpg0-0, NONE, LV1);
+ PIN(2, gpg0-1, DOWN, LV1);
- PIN(IN, gpd2-5, DOWN, LV1);
+ PIN(INPUT, gpd2-5, DOWN, LV1);
- PIN(IN, gpd4-0, NONE, LV1);
- PIN(IN, gpd4-1, DOWN, LV1);
- PIN(IN, gpd4-2, DOWN, LV1);
- PIN(IN, gpd4-3, DOWN, LV1);
- PIN(IN, gpd4-4, DOWN, LV1);
+ PIN(INPUT, gpd4-0, NONE, LV1);
+ PIN(INPUT, gpd4-1, DOWN, LV1);
+ PIN(INPUT, gpd4-2, DOWN, LV1);
+ PIN(INPUT, gpd4-3, DOWN, LV1);
+ PIN(INPUT, gpd4-4, DOWN, LV1);
- PIN(IN, gpd6-3, DOWN, LV1);
+ PIN(INPUT, gpd6-3, DOWN, LV1);
- PIN(IN, gpd8-1, UP, LV1);
+ PIN(INPUT, gpd8-1, UP, LV1);
- PIN(IN, gpg1-0, DOWN, LV1);
- PIN(IN, gpg1-1, DOWN, LV1);
- PIN(IN, gpg1-2, DOWN, LV1);
- PIN(IN, gpg1-3, DOWN, LV1);
- PIN(IN, gpg1-4, DOWN, LV1);
+ PIN(INPUT, gpg1-0, DOWN, LV1);
+ PIN(INPUT, gpg1-1, DOWN, LV1);
+ PIN(INPUT, gpg1-2, DOWN, LV1);
+ PIN(INPUT, gpg1-3, DOWN, LV1);
+ PIN(INPUT, gpg1-4, DOWN, LV1);
- PIN(IN, gpg2-0, DOWN, LV1);
- PIN(IN, gpg2-1, DOWN, LV1);
+ PIN(INPUT, gpg2-0, DOWN, LV1);
+ PIN(INPUT, gpg2-1, DOWN, LV1);
- PIN(IN, gpg3-0, DOWN, LV1);
- PIN(IN, gpg3-1, DOWN, LV1);
- PIN(IN, gpg3-5, DOWN, LV1);
- PIN(IN, gpg3-7, DOWN, LV1);
+ PIN(INPUT, gpg3-0, DOWN, LV1);
+ PIN(INPUT, gpg3-1, DOWN, LV1);
+ PIN(INPUT, gpg3-5, DOWN, LV1);
+ PIN(INPUT, gpg3-7, DOWN, LV1);
};
};
@@ -941,7 +941,7 @@
pinctrl-0 = <&initial_touch>;
initial_touch: initial-state {
- PIN(IN, gpj1-2, DOWN, LV1);
+ PIN(INPUT, gpj1-2, DOWN, LV1);
};
};
--
2.11.0
More information about the linux-arm-kernel
mailing list