[PATCHv2 net-next 06/16] net: mvpp2: adjust the allocation/free of BM pools for PPv2.2
Thomas Petazzoni
thomas.petazzoni at free-electrons.com
Wed Dec 28 08:46:22 PST 2016
This commit adjusts the allocation and freeing of BM pools to support
PPv2.2. This involves:
- Checking that the number of buffer pointers is a multiple of 16, as
required by the hardware.
- Adjusting the size of the DMA coherent area allocated for buffer
pointers. Indeed, PPv2.2 needs space for 2 pointers of 64-bits per
buffer, as opposed to 2 pointers of 32-bits per buffer in
PPv2.1. The size in bytes is now stored in a new field of the
mvpp2_bm_pool structure.
- On PPv2.2, the 32 high order bits of the BM pointer area physical
address must be programmed in the MVPP2_BM_HIGH_BASE_REG register.
- On PPv2.2, getting the physical and virtual address of each buffer
requires reading the MVPP2_BM_ADDR_HIGH_ALLOC to get the high order
bits of those addresses. A new utility function
mvpp2_bm_bufs_get_addrs() is introduced to handle this.
- On PPv2.2, releasing a buffer requires writing the high order 32 bits
of the physical address to MVPP2_BM_PHY_VIRT_HIGH_RLS_REG. We no
longer need to write the virtual address to MVPP2_BM_VIRT_RLS_REG.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
drivers/net/ethernet/marvell/mvpp2.c | 97 ++++++++++++++++++++++++++++++------
1 file changed, 82 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c
index 0e00ec0..160b787 100644
--- a/drivers/net/ethernet/marvell/mvpp2.c
+++ b/drivers/net/ethernet/marvell/mvpp2.c
@@ -208,17 +208,28 @@
#define MVPP2_BM_BPPE_FULL_MASK BIT(3)
#define MVPP2_BM_AVAILABLE_BP_LOW_MASK BIT(4)
#define MVPP2_BM_INTR_MASK_REG(pool) (0x6280 + ((pool) * 4))
+#define MVPP2_BM_HIGH_BASE_REG 0x6310
+#define MVPP2_BM_HIGH_BASE_MASK 0xff
#define MVPP2_BM_PHY_ALLOC_REG(pool) (0x6400 + ((pool) * 4))
#define MVPP2_BM_PHY_ALLOC_GRNTD_MASK BIT(0)
#define MVPP2_BM_VIRT_ALLOC_REG 0x6440
+#define MVPP2_BM_ADDR_HIGH_ALLOC 0x6444
+#define MVPP2_BM_ADDR_HIGH_PHYS_MASK 0xff
+#define MVPP2_BM_ADDR_HIGH_VIRT_MASK 0xff00
+#define MVPP2_BM_ADDR_HIGH_VIRT_SHIFT 8
#define MVPP2_BM_PHY_RLS_REG(pool) (0x6480 + ((pool) * 4))
#define MVPP2_BM_PHY_RLS_MC_BUFF_MASK BIT(0)
#define MVPP2_BM_PHY_RLS_PRIO_EN_MASK BIT(1)
#define MVPP2_BM_PHY_RLS_GRNTD_MASK BIT(2)
#define MVPP2_BM_VIRT_RLS_REG 0x64c0
-#define MVPP2_BM_MC_RLS_REG 0x64c4
+#define MVPP21_BM_MC_RLS_REG 0x64c4
#define MVPP2_BM_MC_ID_MASK 0xfff
#define MVPP2_BM_FORCE_RELEASE_MASK BIT(12)
+#define MVPP22_BM_ADDR_HIGH_RLS_REG 0x64c4
+#define MVPP22_BM_ADDR_HIGH_PHYS_RLS_MASK 0xff
+#define MVPP22_BM_ADDR_HIGH_VIRT_RLS_MASK 0xff00
+#define MVPP22_BM_ADDR_HIGH_VIRT_RLS_SHIFT 8
+#define MVPP22_BM_MC_RLS_REG 0x64d4
/* TX Scheduler registers */
#define MVPP2_TXP_SCHED_PORT_INDEX_REG 0x8000
@@ -957,6 +968,8 @@ struct mvpp2_bm_pool {
/* Buffer Pointers Pool External (BPPE) size */
int size;
+ /* BPPE size in bytes */
+ int size_bytes;
/* Number of buffers for this pool */
int buf_num;
/* Pool buffer size */
@@ -3558,11 +3571,23 @@ static int mvpp2_bm_pool_create(struct platform_device *pdev,
struct mvpp2 *priv,
struct mvpp2_bm_pool *bm_pool, int size)
{
- int size_bytes;
u32 val;
- size_bytes = sizeof(u32) * size;
- bm_pool->virt_addr = dma_alloc_coherent(&pdev->dev, size_bytes,
+ /* Number of buffer pointers must be a multiple of 16, as per
+ * hardware constraints
+ */
+ if (!IS_ALIGNED(size, 16))
+ return -EINVAL;
+
+ /* PPv2.1 needs 8 bytes per buffer pointer, PPv2.2 needs 16
+ * bytes per buffer pointer
+ */
+ if (priv->hw_version == MVPP21)
+ bm_pool->size_bytes = 2 * sizeof(u32) * size;
+ else
+ bm_pool->size_bytes = 2 * sizeof(u64) * size;
+
+ bm_pool->virt_addr = dma_alloc_coherent(&pdev->dev, bm_pool->size_bytes,
&bm_pool->phys_addr,
GFP_KERNEL);
if (!bm_pool->virt_addr)
@@ -3570,15 +3595,24 @@ static int mvpp2_bm_pool_create(struct platform_device *pdev,
if (!IS_ALIGNED((unsigned long)bm_pool->virt_addr,
MVPP2_BM_POOL_PTR_ALIGN)) {
- dma_free_coherent(&pdev->dev, size_bytes, bm_pool->virt_addr,
- bm_pool->phys_addr);
+ dma_free_coherent(&pdev->dev, bm_pool->size_bytes,
+ bm_pool->virt_addr, bm_pool->phys_addr);
dev_err(&pdev->dev, "BM pool %d is not %d bytes aligned\n",
bm_pool->id, MVPP2_BM_POOL_PTR_ALIGN);
return -ENOMEM;
}
mvpp2_write(priv, MVPP2_BM_POOL_BASE_REG(bm_pool->id),
- bm_pool->phys_addr);
+ lower_32_bits(bm_pool->phys_addr));
+ /* On PPv2.2, program the high order bits of the base address */
+ if (priv->hw_version == MVPP22) {
+ if (sizeof(dma_addr_t) == 8)
+ val = upper_32_bits(bm_pool->phys_addr) &
+ MVPP2_BM_HIGH_BASE_MASK;
+ else
+ val = 0;
+ mvpp2_write(priv, MVPP2_BM_HIGH_BASE_REG, val);
+ }
mvpp2_write(priv, MVPP2_BM_POOL_SIZE_REG(bm_pool->id), size);
val = mvpp2_read(priv, MVPP2_BM_POOL_CTRL_REG(bm_pool->id));
@@ -3606,6 +3640,27 @@ static void mvpp2_bm_pool_bufsize_set(struct mvpp2 *priv,
mvpp2_write(priv, MVPP2_POOL_BUF_SIZE_REG(bm_pool->id), val);
}
+static void mvpp2_bm_bufs_get_addrs(struct device *dev, struct mvpp2 *priv,
+ struct mvpp2_bm_pool *bm_pool,
+ dma_addr_t *paddr, unsigned long *vaddr)
+{
+ *paddr = mvpp2_read(priv, MVPP2_BM_PHY_ALLOC_REG(bm_pool->id));
+ *vaddr = mvpp2_read(priv, MVPP2_BM_VIRT_ALLOC_REG);
+
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+ if (priv->hw_version == MVPP22) {
+ u32 val;
+ u32 paddr_highbits;
+
+ val = mvpp2_read(priv, MVPP2_BM_ADDR_HIGH_ALLOC);
+ paddr_highbits = (val & MVPP2_BM_ADDR_HIGH_PHYS_MASK);
+
+ *paddr |= (dma_addr_t)paddr_highbits << 32;
+ *vaddr = (unsigned long)phys_to_virt(dma_to_phys(dev, *paddr));
+ }
+#endif
+}
+
/* Free all buffers from the pool */
static void mvpp2_bm_bufs_free(struct device *dev, struct mvpp2 *priv,
struct mvpp2_bm_pool *bm_pool)
@@ -3616,10 +3671,8 @@ static void mvpp2_bm_bufs_free(struct device *dev, struct mvpp2 *priv,
dma_addr_t buf_phys_addr;
unsigned long vaddr;
- /* Get buffer virtual address (indirect access) */
- buf_phys_addr = mvpp2_read(priv,
- MVPP2_BM_PHY_ALLOC_REG(bm_pool->id));
- vaddr = mvpp2_read(priv, MVPP2_BM_VIRT_ALLOC_REG);
+ mvpp2_bm_bufs_get_addrs(dev, priv, bm_pool,
+ &buf_phys_addr, &vaddr);
dma_unmap_single(dev, buf_phys_addr,
bm_pool->buf_size, DMA_FROM_DEVICE);
@@ -3651,7 +3704,7 @@ static int mvpp2_bm_pool_destroy(struct platform_device *pdev,
val |= MVPP2_BM_STOP_MASK;
mvpp2_write(priv, MVPP2_BM_POOL_CTRL_REG(bm_pool->id), val);
- dma_free_coherent(&pdev->dev, sizeof(u32) * bm_pool->size,
+ dma_free_coherent(&pdev->dev, bm_pool->size_bytes,
bm_pool->virt_addr,
bm_pool->phys_addr);
return 0;
@@ -3787,8 +3840,19 @@ static inline void mvpp2_bm_pool_put(struct mvpp2_port *port, int pool,
dma_addr_t buf_phys_addr,
unsigned long buf_virt_addr)
{
- mvpp2_write(port->priv, MVPP2_BM_VIRT_RLS_REG, buf_virt_addr);
- mvpp2_write(port->priv, MVPP2_BM_PHY_RLS_REG(pool), buf_phys_addr);
+#if defined(CONFIG_ARCH_DMA_ADDR_T_64BIT)
+ u32 val;
+
+ val = upper_32_bits(buf_phys_addr) & MVPP22_BM_ADDR_HIGH_PHYS_RLS_MASK;
+ val |= (upper_32_bits(buf_virt_addr) &
+ MVPP22_BM_ADDR_HIGH_VIRT_RLS_MASK)
+ << MVPP22_BM_ADDR_HIGH_VIRT_RLS_SHIFT;
+ mvpp2_write(port->priv, MVPP22_BM_ADDR_HIGH_RLS_REG, val);
+#endif
+ mvpp2_write(port->priv, MVPP2_BM_VIRT_RLS_REG,
+ lower_32_bits(buf_virt_addr));
+ mvpp2_write(port->priv, MVPP2_BM_PHY_RLS_REG(pool),
+ lower_32_bits(buf_phys_addr));
}
/* Release multicast buffer */
@@ -3800,7 +3864,10 @@ static void mvpp2_bm_pool_mc_put(struct mvpp2_port *port, int pool,
u32 val = 0;
val |= (mc_id & MVPP2_BM_MC_ID_MASK);
- mvpp2_write(port->priv, MVPP2_BM_MC_RLS_REG, val);
+ if (port->priv->hw_version == MVPP21)
+ mvpp2_write(port->priv, MVPP21_BM_MC_RLS_REG, val);
+ else
+ mvpp2_write(port->priv, MVPP22_BM_MC_RLS_REG, val);
mvpp2_bm_pool_put(port, pool,
buf_phys_addr | MVPP2_BM_PHY_RLS_MC_BUFF_MASK,
--
2.7.4
More information about the linux-arm-kernel
mailing list