[PATCH 1/6] ARM: mach-mx31_3ds: Remove camera support

[Fabio Estevam]

Hi Magnus,

On Tue, Dec 27, 2016 at 8:05 AM, Magnus Lilja <lilja.magnus at gmail.com> wrote:

> CSI_D5 is marked as "not floating" by default, as opposed to "input,
> pulled up" on many other pins on the i.MX31. That makes me wonder if
> it's best to keep the initialization of CSI_D5 and RI_DTE1 to make
> sure the pins are set to a defined state (that also will set the
> camera off).

After this patch the camera will not be powered by the mc13783 PMIC
anymore, so I think it is safe to remove the code that handles the
camera GPIOs.


> Will test the patch on hardware in a couple of days.

Thanks!