[PATCH v5 0/6] arm64: arch_timer: Add workaround for hisilicon-161601 erratum
Ding Tianhong
dingtianhong at huawei.com
Thu Dec 22 23:04:23 PST 2016
Erratum Hisilicon-161601 says that the ARM generic timer counter "has the
potential to contain an erroneous value when the timer value changes".
Accesses to TVAL (both read and write) are also affected due to the implicit counter
read. Accesses to CVAL are not affected.
The workaround is to reread the system count registers until the value of the second
read is larger than the first one by less than 32, the system counter can be guaranteed
not to return wrong value twice by back-to-back read and the error value is always larger
than the correct one by 32. Writes to TVAL are replaced with an equivalent write to CVAL.
v2: Introducing a new generic erratum handling mechanism for fsl,a008585 and hisilicon,161601.
Significant rework based on feedback, including seperate the fsl erratum a008585
to another patch, update the erratum name and remove unwanted code.
v3: Introducing the erratum_workaround_set_sne generic function for fsl erratum a008585
and make the #define __fsl_a008585_read_reg to be private to the .c file instead of
being globally visible. After discussion with Marc and Will, a consensus decision was
made to remove the commandline parameter for enabling fsl,erratum-a008585 erratum,
and make some generic name more specific, export timer_unstable_counter_workaround
for module access.
Significant rework based on feedback, including fix some alignment problem, make the
#define __hisi_161601_read_reg to be private to the .c file instead of being globally
visible, add more accurate annotation and modify a bit of logical format to enable
arch_timer_read_ool_enabled, remove the kernel commandline parameter
clocksource.arm_arch_timer.hisilicon-161601.
Introduce a generic aquick framework for erratum in ACPI mode.
v4: rename the quirk handler parameter to make it more generic, and
avoid break loop when handling the quirk becasue it need to
support multi quirks handler.
update some data structures for acpi mode.
v5: Adapt the new kernel-parameters.txt for latest kernel version.
Set the retries of reread system counter to 50, because it is possible
that some interrupts may lead to more than twice read errors and break the loop,
it will trigger the warning, so we set the number of retries far beyond the number of
iterations the loop has been observed to take.
Ding Tianhong (4):
arm64: arch_timer: Add device tree binding for hisilicon-161601
erratum
arm64: arch_timer: Introduce a generic erratum handing mechanism for
fsl-a008585
arm64: arch_timer: Work around Erratum Hisilicon-161601
arm64: arch timer: Add timer erratum property for Hip05-d02 and
Hip06-d03
Hanjun Guo (2):
arm64: arch_timer: apci: Introduce a generic aquirk framework for
erratum
arm64: arch_timer: acpi: add hisi timer errata data
Documentation/arm64/silicon-errata.txt | 1 +
.../devicetree/bindings/arm/arch_timer.txt | 8 +
Documentation/kernel-parameters.txt | 9 -
arch/arm64/boot/dts/hisilicon/hip05.dtsi | 1 +
arch/arm64/boot/dts/hisilicon/hip06.dtsi | 1 +
arch/arm64/include/asm/arch_timer.h | 38 ++--
drivers/clocksource/Kconfig | 9 +
drivers/clocksource/arm_arch_timer.c | 197 +++++++++++++++++----
8 files changed, 194 insertions(+), 70 deletions(-)
--
1.9.0
More information about the linux-arm-kernel
mailing list