[PATCH 3/3] dmaengine: pl330: Don't require irq-safe runtime PM
Marek Szyprowski
m.szyprowski at samsung.com
Thu Dec 22 04:11:29 PST 2016
This patch replaces irq-safe runtime pm with non-irq-safe version.
Till now non-irq-safe runtime PM implementation was only possible by calling
pm_runtime_get/put functions from alloc/free_chan_resources. All other DMA
engine API functions cannot be called from a context, which allows sleeping.
Such implementation in practice resulted in keeping PL330 DMA controller
device active almost all the time, because most of the slave device drivers
(DMA engine clients) acquired DMA channel in their probe() function and
released it during driver removal.
This patch provides a new approach. The main assumption for it is an
observation that there can be only one slave device using each DMA channel.
Using recently introduced device dependencies (links) infrastructure one can
ensure proper runtime PM state of PL330 DMA controller. In this approach in
pl330_alloc_chan_resources() function a new dependency is being created
between PL330 DMA controller device (as supplier) and given slave device
(as consumer). This way PL330 DMA controller device runtime active counter
is increased when the slave device is resumed and decreased the same time
when given slave device is put to suspend. This way it has been ensured to
keep PL330 DMA controller runtime active if there is an active used of any
of its DMA channels. Slave device pointer is initially stored in per-channel
data in of_dma_xlate callback. This is similar to what has been already
implemented in Exynos IOMMU driver in commit 2f5f44f205cc958b
("iommu/exynos: Use device dependency links to control runtime pm").
If one requests memory-to-memory chanel, runtime active counter is
increased unconditionally. This might be a drawback of this approach, but
PL330 is not really used for memory-to-memory operations due to poor
performance in such operations compared to CPU.
Introducing non-irq-safe runtime power management finally allows to turn
audio power domain off on Exynos5 SoCs.
Removal of irq-safe runtime pm is based on the revert of the following
commits:
1. "dmaengine: pl330: fix runtime pm support" commit <no stable id yet>
2. "dmaengine: pl330: Fix hang on dmaengine_terminate_all on certain boards"
commit 81cc6edc08705ac0146fe6ac14a0982a31ce6f3d
3. "ARM: 8202/1: dmaengine: pl330: Add runtime Power Management support v12"
commit ae43b3289186480f81c78bb63d788a85a3631f47
Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
---
drivers/dma/pl330.c | 133 +++++++++++++++++++++++++++-------------------------
1 file changed, 70 insertions(+), 63 deletions(-)
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 3c80e71..2cffbb4 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -268,9 +268,6 @@ enum pl330_byteswap {
#define NR_DEFAULT_DESC 16
-/* Delay for runtime PM autosuspend, ms */
-#define PL330_AUTOSUSPEND_DELAY 20
-
/* Populated by the PL330 core driver for DMA API driver's info */
struct pl330_config {
u32 periph_id;
@@ -449,7 +446,8 @@ struct dma_pl330_chan {
bool cyclic;
/* for runtime pm tracking */
- bool active;
+ struct device *slave;
+ struct device_link *slave_link;
};
struct pl330_dmac {
@@ -2015,7 +2013,6 @@ static void pl330_tasklet(unsigned long data)
struct dma_pl330_chan *pch = (struct dma_pl330_chan *)data;
struct dma_pl330_desc *desc, *_dt;
unsigned long flags;
- bool power_down = false;
spin_lock_irqsave(&pch->lock, flags);
@@ -2030,18 +2027,10 @@ static void pl330_tasklet(unsigned long data)
/* Try to submit a req imm. next to the last completed cookie */
fill_queue(pch);
- if (list_empty(&pch->work_list)) {
- spin_lock(&pch->thread->dmac->lock);
- _stop(pch->thread);
- spin_unlock(&pch->thread->dmac->lock);
- power_down = true;
- pch->active = false;
- } else {
- /* Make sure the PL330 Channel thread is active */
- spin_lock(&pch->thread->dmac->lock);
- _start(pch->thread);
- spin_unlock(&pch->thread->dmac->lock);
- }
+ /* Make sure the PL330 Channel thread is active */
+ spin_lock(&pch->thread->dmac->lock);
+ _start(pch->thread);
+ spin_unlock(&pch->thread->dmac->lock);
while (!list_empty(&pch->completed_list)) {
struct dmaengine_desc_callback cb;
@@ -2054,13 +2043,6 @@ static void pl330_tasklet(unsigned long data)
if (pch->cyclic) {
desc->status = PREP;
list_move_tail(&desc->node, &pch->work_list);
- if (power_down) {
- pch->active = true;
- spin_lock(&pch->thread->dmac->lock);
- _start(pch->thread);
- spin_unlock(&pch->thread->dmac->lock);
- power_down = false;
- }
} else {
desc->status = FREE;
list_move_tail(&desc->node, &pch->dmac->desc_pool);
@@ -2075,12 +2057,6 @@ static void pl330_tasklet(unsigned long data)
}
}
spin_unlock_irqrestore(&pch->lock, flags);
-
- /* If work list empty, power down */
- if (power_down) {
- pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
- pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
- }
}
bool pl330_filter(struct dma_chan *chan, void *param)
@@ -2113,14 +2089,63 @@ static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec,
if (chan_id >= pl330->num_peripherals)
return NULL;
+ if (!pl330->peripherals[chan_id].slave)
+ pl330->peripherals[chan_id].slave = slave;
+ else if (pl330->peripherals[chan_id].slave != slave) {
+ dev_err(pl330->ddma.dev,
+ "Can't use same channel with multiple slave devices!\n");
+ return NULL;
+ }
+
return dma_get_slave_channel(&pl330->peripherals[chan_id].chan);
}
+static int pl330_add_slave_link(struct pl330_dmac *pl330,
+ struct dma_pl330_chan *pch)
+{
+ struct device_link *link;
+ int i;
+
+ if (pch->slave_link)
+ return 0;
+
+ link = device_link_add(pch->slave, pl330->ddma.dev,
+ DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE);
+ if (!link)
+ return -ENODEV;
+
+ for (i = 0; i < pl330->num_peripherals; i++)
+ if (pl330->peripherals[i].slave == pch->slave)
+ pl330->peripherals[i].slave_link = link;
+ return 0;
+}
+
+static void pl330_del_slave_link(struct pl330_dmac *pl330,
+ struct dma_pl330_chan *pch)
+{
+ struct device_link *link = pch->slave_link;
+ int i, count = 0;
+
+ for (i = 0; i < pl330->num_peripherals; i++)
+ if (pl330->peripherals[i].slave == pch->slave &&
+ pl330->peripherals[i].thread)
+ count++;
+
+ if (count > 0)
+ return;
+
+ device_link_del(link);
+ for (i = 0; i < pl330->num_peripherals; i++)
+ if (pl330->peripherals[i].slave == pch->slave)
+ pch->slave_link = NULL;
+}
+
static int pl330_alloc_chan_resources(struct dma_chan *chan)
{
struct dma_pl330_chan *pch = to_pchan(chan);
struct pl330_dmac *pl330 = pch->dmac;
unsigned long flags;
+ int ret = 0;
spin_lock_irqsave(&pch->lock, flags);
@@ -2137,6 +2162,14 @@ static int pl330_alloc_chan_resources(struct dma_chan *chan)
spin_unlock_irqrestore(&pch->lock, flags);
+ if (pch->slave)
+ ret = pl330_add_slave_link(pl330, pch);
+ else
+ ret = pm_runtime_get_sync(pl330->ddma.dev);
+
+ if (ret < 0)
+ return ret;
+
return 1;
}
@@ -2171,9 +2204,7 @@ static int pl330_terminate_all(struct dma_chan *chan)
unsigned long flags;
struct pl330_dmac *pl330 = pch->dmac;
LIST_HEAD(list);
- bool power_down = false;
- pm_runtime_get_sync(pl330->ddma.dev);
spin_lock_irqsave(&pch->lock, flags);
spin_lock(&pl330->lock);
_stop(pch->thread);
@@ -2182,8 +2213,6 @@ static int pl330_terminate_all(struct dma_chan *chan)
pch->thread->req[0].desc = NULL;
pch->thread->req[1].desc = NULL;
pch->thread->req_running = -1;
- power_down = pch->active;
- pch->active = false;
/* Mark all desc done */
list_for_each_entry(desc, &pch->submitted_list, node) {
@@ -2200,10 +2229,6 @@ static int pl330_terminate_all(struct dma_chan *chan)
list_splice_tail_init(&pch->work_list, &pl330->desc_pool);
list_splice_tail_init(&pch->completed_list, &pl330->desc_pool);
spin_unlock_irqrestore(&pch->lock, flags);
- pm_runtime_mark_last_busy(pl330->ddma.dev);
- if (power_down)
- pm_runtime_put_autosuspend(pl330->ddma.dev);
- pm_runtime_put_autosuspend(pl330->ddma.dev);
return 0;
}
@@ -2221,7 +2246,6 @@ static int pl330_pause(struct dma_chan *chan)
struct pl330_dmac *pl330 = pch->dmac;
unsigned long flags;
- pm_runtime_get_sync(pl330->ddma.dev);
spin_lock_irqsave(&pch->lock, flags);
spin_lock(&pl330->lock);
@@ -2229,8 +2253,6 @@ static int pl330_pause(struct dma_chan *chan)
spin_unlock(&pl330->lock);
spin_unlock_irqrestore(&pch->lock, flags);
- pm_runtime_mark_last_busy(pl330->ddma.dev);
- pm_runtime_put_autosuspend(pl330->ddma.dev);
return 0;
}
@@ -2238,11 +2260,11 @@ static int pl330_pause(struct dma_chan *chan)
static void pl330_free_chan_resources(struct dma_chan *chan)
{
struct dma_pl330_chan *pch = to_pchan(chan);
+ struct pl330_dmac *pl330 = pch->dmac;
unsigned long flags;
tasklet_kill(&pch->task);
- pm_runtime_get_sync(pch->dmac->ddma.dev);
spin_lock_irqsave(&pch->lock, flags);
pl330_release_channel(pch->thread);
@@ -2252,19 +2274,20 @@ static void pl330_free_chan_resources(struct dma_chan *chan)
list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
spin_unlock_irqrestore(&pch->lock, flags);
- pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
- pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
+
+ if (pch->slave)
+ pl330_del_slave_link(pl330, pch);
+ else
+ pm_runtime_put(pl330->ddma.dev);
}
static int pl330_get_current_xferred_count(struct dma_pl330_chan *pch,
struct dma_pl330_desc *desc)
{
struct pl330_thread *thrd = pch->thread;
- struct pl330_dmac *pl330 = pch->dmac;
void __iomem *regs = thrd->dmac->base;
u32 val, addr;
- pm_runtime_get_sync(pl330->ddma.dev);
val = addr = 0;
if (desc->rqcfg.src_inc) {
val = readl(regs + SA(thrd->id));
@@ -2273,8 +2296,6 @@ static int pl330_get_current_xferred_count(struct dma_pl330_chan *pch,
val = readl(regs + DA(thrd->id));
addr = desc->px.dst_addr;
}
- pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
- pm_runtime_put_autosuspend(pl330->ddma.dev);
/* If DMAMOV hasn't finished yet, SAR/DAR can be zero */
if (!val)
@@ -2360,16 +2381,6 @@ static void pl330_issue_pending(struct dma_chan *chan)
unsigned long flags;
spin_lock_irqsave(&pch->lock, flags);
- if (list_empty(&pch->work_list)) {
- /*
- * Warn on nothing pending. Empty submitted_list may
- * break our pm_runtime usage counter as it is
- * updated on work_list emptiness status.
- */
- WARN_ON(list_empty(&pch->submitted_list));
- pch->active = true;
- pm_runtime_get_sync(pch->dmac->ddma.dev);
- }
list_splice_tail_init(&pch->submitted_list, &pch->work_list);
spin_unlock_irqrestore(&pch->lock, flags);
@@ -2987,11 +2998,7 @@ static int __maybe_unused pl330_resume(struct device *dev)
pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan,
pcfg->num_peri, pcfg->num_events);
- pm_runtime_irq_safe(&adev->dev);
- pm_runtime_use_autosuspend(&adev->dev);
- pm_runtime_set_autosuspend_delay(&adev->dev, PL330_AUTOSUSPEND_DELAY);
- pm_runtime_mark_last_busy(&adev->dev);
- pm_runtime_put_autosuspend(&adev->dev);
+ pm_runtime_put(&adev->dev);
return 0;
probe_err3:
--
1.9.1
More information about the linux-arm-kernel
mailing list