[PATCH 1/2] soc: ti: Use remoteproc auto_boot feature

[Suman Anna]

Hi Sarang,

On 12/15/2016 06:03 PM, Sarangdhar Joshi wrote:
> The function wkup_m3_rproc_boot_thread waits for asynchronous
> firmware loading to complete successfully before calling
> rproc_boot(). The same can be achieved by just setting
> rproc->auto_boot flag. Change this. As a result this change
> removes wkup_m3_rproc_boot_thread and moves m3_ipc->sync_complete
> initialization to the wkup_m3_ipc_probe().
> 
> Other than the current usage, the firmware_loading_complete is
> only used in rproc_del() where it's no longer needed.  This
> change is in preparation for removing firmware_loading_complete
> completely.

Based on the comments so far, I am assuming that you are dropping this
series.

In any case, this series did break our PM stack. We definitely don't
want to auto-boot the wkup_m3_rproc device, that responsibility will
need to stay with the wkup_m3_ipc driver.

regards
Suman

> 
> CC: Dave Gerlach <d-gerlach at ti.com>
> CC: Suman Anna <s-anna at ti.com>
> CC: Bjorn Andersson <bjorn.andersson at linaro.org>
> Signed-off-by: Sarangdhar Joshi <spjoshi at codeaurora.org>
> ---
> 
> Hi Suman,
> 
> Unfortunately, I don't have a TI device and couldn't test this
> change. Is it possible for you to test this change on TI device?
> 
> Thanks in advance.
> 
> Regards,
> Sarang
> 
>  drivers/remoteproc/wkup_m3_rproc.c |  2 +-
>  drivers/soc/ti/wkup_m3_ipc.c       | 35 ++---------------------------------
>  2 files changed, 3 insertions(+), 34 deletions(-)
> 
> diff --git a/drivers/remoteproc/wkup_m3_rproc.c b/drivers/remoteproc/wkup_m3_rproc.c
> index 18175d0..79ea022 100644
> --- a/drivers/remoteproc/wkup_m3_rproc.c
> +++ b/drivers/remoteproc/wkup_m3_rproc.c
> @@ -167,7 +167,7 @@ static int wkup_m3_rproc_probe(struct platform_device *pdev)
>  		goto err;
>  	}
>  
> -	rproc->auto_boot = false;
> +	rproc->auto_boot = true;
>  
>  	wkupm3 = rproc->priv;
>  	wkupm3->rproc = rproc;
> diff --git a/drivers/soc/ti/wkup_m3_ipc.c b/drivers/soc/ti/wkup_m3_ipc.c
> index 8823cc8..31090d70 100644
> --- a/drivers/soc/ti/wkup_m3_ipc.c
> +++ b/drivers/soc/ti/wkup_m3_ipc.c
> @@ -17,7 +17,6 @@
>  
>  #include <linux/err.h>
>  #include <linux/kernel.h>
> -#include <linux/kthread.h>
>  #include <linux/interrupt.h>
>  #include <linux/irq.h>
>  #include <linux/module.h>
> @@ -365,22 +364,6 @@ void wkup_m3_ipc_put(struct wkup_m3_ipc *m3_ipc)
>  }
>  EXPORT_SYMBOL_GPL(wkup_m3_ipc_put);
>  
> -static void wkup_m3_rproc_boot_thread(struct wkup_m3_ipc *m3_ipc)
> -{
> -	struct device *dev = m3_ipc->dev;
> -	int ret;
> -
> -	wait_for_completion(&m3_ipc->rproc->firmware_loading_complete);
> -
> -	init_completion(&m3_ipc->sync_complete);
> -
> -	ret = rproc_boot(m3_ipc->rproc);
> -	if (ret)
> -		dev_err(dev, "rproc_boot failed\n");
> -
> -	do_exit(0);
> -}
> -
>  static int wkup_m3_ipc_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -388,7 +371,6 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev)
>  	phandle rproc_phandle;
>  	struct rproc *m3_rproc;
>  	struct resource *res;
> -	struct task_struct *task;
>  	struct wkup_m3_ipc *m3_ipc;
>  
>  	m3_ipc = devm_kzalloc(dev, sizeof(*m3_ipc), GFP_KERNEL);
> @@ -402,6 +384,8 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev)
>  		return PTR_ERR(m3_ipc->ipc_mem_base);
>  	}
>  
> +	init_completion(&m3_ipc->sync_complete);
> +
>  	irq = platform_get_irq(pdev, 0);
>  	if (!irq) {
>  		dev_err(&pdev->dev, "no irq resource\n");
> @@ -449,25 +433,10 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev)
>  
>  	m3_ipc->ops = &ipc_ops;
>  
> -	/*
> -	 * Wait for firmware loading completion in a thread so we
> -	 * can boot the wkup_m3 as soon as it's ready without holding
> -	 * up kernel boot
> -	 */
> -	task = kthread_run((void *)wkup_m3_rproc_boot_thread, m3_ipc,
> -			   "wkup_m3_rproc_loader");
> -
> -	if (IS_ERR(task)) {
> -		dev_err(dev, "can't create rproc_boot thread\n");
> -		goto err_put_rproc;
> -	}
> -
>  	m3_ipc_state = m3_ipc;
>  
>  	return 0;
>  
> -err_put_rproc:
> -	rproc_put(m3_rproc);
>  err_free_mbox:
>  	mbox_free_channel(m3_ipc->mbox);
>  	return ret;
>