[PATCH 3/3] ARM: da850: Add ti, da830-uart compatible for serial ports
David Lechner
david at lechnology.com
Tue Dec 20 12:23:04 PST 2016
TI DA8xx/OMAPL13x/AM17xx/AM18xx SoCs have extra UART registers beyond
the standard 8250 registers, so we need a new compatible string to
indicate this. Also, at least one of these registers uses the full 32
bits, so we need to specify reg-io-width in addition to reg-shift.
"ns16550a" is left in the compatible specification since it does work
as long as the bootloader configures the SoC UART power management
registers.
Signed-off-by: David Lechner <david at lechnology.com>
---
arch/arm/boot/dts/da850.dtsi | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 104155d..f6cd212 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -266,22 +266,25 @@
interrupt-names = "edm3_tcerrint";
};
serial0: serial at 42000 {
- compatible = "ns16550a";
+ compatible = "ti,da830-uart", "ns16550a";
reg = <0x42000 0x100>;
+ reg-io-width = <4>;
reg-shift = <2>;
interrupts = <25>;
status = "disabled";
};
serial1: serial at 10c000 {
- compatible = "ns16550a";
+ compatible = "ti,da830-uart", "ns16550a";
reg = <0x10c000 0x100>;
+ reg-io-width = <4>;
reg-shift = <2>;
interrupts = <53>;
status = "disabled";
};
serial2: serial at 10d000 {
- compatible = "ns16550a";
+ compatible = "ti,da830-uart", "ns16550a";
reg = <0x10d000 0x100>;
+ reg-io-width = <4>;
reg-shift = <2>;
interrupts = <61>;
status = "disabled";
--
2.7.4
More information about the linux-arm-kernel
mailing list