[linux-sunxi][PATCH 3/3] ARM: dts: sun6i: Add SPDIF to the Mele I7
codekipper at gmail.com
codekipper at gmail.com
Tue Dec 20 02:40:38 PST 2016
From: Marcus Cooper <codekipper at gmail.com>
Enable the S/PDIF transmitter that is present on the Mele I7.
Signed-off-by: Marcus Cooper <codekipper at gmail.com>
---
arch/arm/boot/dts/sun6i-a31-i7.dts | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts
index a2193309a199..2bc57d2dcd80 100644
--- a/arch/arm/boot/dts/sun6i-a31-i7.dts
+++ b/arch/arm/boot/dts/sun6i-a31-i7.dts
@@ -69,6 +69,23 @@
gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
};
};
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "On-board SPDIF";
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ spdif_out: spdif-out {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ };
};
&codec {
@@ -138,6 +155,13 @@
status = "okay";
};
+&spdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_pins_a>;
+ spdif-out = "okay";
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
--
2.11.0
More information about the linux-arm-kernel
mailing list