[PATCH v4 5/5] mfd: dt: Add bindings for the Aspeed SoC Display Controller (GFX)
Andrew Jeffery
andrew at aj.id.au
Mon Dec 19 23:15:35 PST 2016
The Aspeed SoC Display Controller is presented as a syscon device to
arbitrate access by display and pinmux drivers. Video pinmux
configuration on fifth generation SoCs depends on bits in both the
System Control Unit and the Display Controller.
Signed-off-by: Andrew Jeffery <andrew at aj.id.au>
Acked-by: Rob Herring <robh at kernel.org>
---
Documentation/devicetree/bindings/mfd/aspeed-gfx.txt | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt b/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
new file mode 100644
index 000000000000..aea5370efd97
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
@@ -0,0 +1,17 @@
+* Device tree bindings for Aspeed SoC Display Controller (GFX)
+
+The Aspeed SoC Display Controller primarily does as its name suggests, but also
+participates in pinmux requests on the g5 SoCs. It is therefore considered a
+syscon device.
+
+Required properties:
+- compatible: "aspeed,ast2500-gfx", "syscon"
+- reg: contains offset/length value of the GFX memory
+ region.
+
+Example:
+
+gfx: display at 1e6e6000 {
+ compatible = "aspeed,ast2500-gfx", "syscon";
+ reg = <0x1e6e6000 0x1000>;
+};
--
2.9.3
More information about the linux-arm-kernel
mailing list