[PATCH 3/4] net: dsa: mv88e6xxx: Add support for ethernet switch 88E6341/88E6141

[Andrew Lunn]

Hi Romain

> diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
> index 76d944e..72ba24b 100644
> --- a/drivers/net/dsa/mv88e6xxx/chip.c
> +++ b/drivers/net/dsa/mv88e6xxx/chip.c
> @@ -4086,6 +4086,20 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
>  		.ops = &mv88e6321_ops,
>  	},
>  
> +	[MV88E6341] = {
> +		.prod_num = PORT_SWITCH_ID_PROD_NUM_6341,
> +		.family = MV88E6XXX_FAMILY_6352,
> +		.name = "Marvell 88E6341",
> +		.num_databases = 4096,
> +		.num_ports = 6,
> +		.port_base_addr = 0x10,
> +		.global1_addr = 0x1b,
> +		.age_time_coeff = 15000,
> +		.tag_protocol = DSA_TAG_PROTO_EDSA,
> +		.flags = MV88E6XXX_FLAGS_FAMILY_6352,
> +		.ops = &mv88e6352_ops,

Even if it i 100% compatible with the 6532, you should still add an
ops structure for it. All chips have their own, even when the are
exactly the same as other in the family.

> --- a/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
> +++ b/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
> @@ -86,6 +86,7 @@
>  #define PORT_SWITCH_ID_PROD_NUM_6097	0x099
>  #define PORT_SWITCH_ID_PROD_NUM_6131	0x106
>  #define PORT_SWITCH_ID_PROD_NUM_6320	0x115
> +#define PORT_SWITCH_ID_PROD_NUM_6341	0x340
>  #define PORT_SWITCH_ID_PROD_NUM_6123	0x121
>  #define PORT_SWITCH_ID_PROD_NUM_6161	0x161

Ah, err..

These should be in numerical order of the macro.
PORT_SWITCH_ID_PROD_NUM_6320 is however in the wrong place.  Please
put the 6341 after the 6321.

Thanks
	Andrew