[PATCH v2] ARM: dts: Add missing CPU frequencies for Exynos5422/5800
Bartlomiej Zolnierkiewicz
b.zolnierkie at samsung.com
Thu Dec 15 03:55:59 PST 2016
Add missing 2000MHz & 1900MHz OPPs (for A15 cores) and 1400MHz OPP
(for A7 cores). Also update common Odroid-XU3 Lite/XU3/XU4 thermal
cooling maps to account for new OPPs.
Since new OPPs are not available on all Exynos5422/5800 boards modify
dts files for Odroid-XU3 Lite (limited to 1.8 GHz / 1.3 GHz) & Peach
Pi (limited to 2.0 GHz / 1.3 GHz) accordingly.
Tested on Odroid-XU3 and XU3 Lite.
Cc: Doug Anderson <dianders at chromium.org>
Cc: Javier Martinez Canillas <javier at osg.samsung.com>
Cc: Andreas Faerber <afaerber at suse.de>
Cc: Thomas Abraham <thomas.ab at samsung.com>
Cc: Ben Gamari <ben at smart-cactus.org>
Cc: Arjun K V <arjun.kv at samsung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie at samsung.com>
---
v2:
- added comments about limitations of SoC revisions used by Odroid-XU3 Lite and
Peach Pi boards (suggested by Javier)
- removed redundant opp_a7_14 label
- added Arjun to Cc:
Javier, could you test it on Peach Pi board?
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 14 ++++++-------
arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 22 +++++++++++++++++++++
arch/arm/boot/dts/exynos5800-peach-pi.dts | 9 ++++++++
arch/arm/boot/dts/exynos5800.dtsi | 15 ++++++++++++++
4 files changed, 53 insertions(+), 7 deletions(-)
Index: b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
===================================================================
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi 2016-12-15 12:43:54.365955950 +0100
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi 2016-12-15 12:43:54.361955949 +0100
@@ -118,7 +118,7 @@
/*
* When reaching cpu_alert3, reduce CPU
* by 2 steps. On Exynos5422/5800 that would
- * be: 1600 MHz and 1100 MHz.
+ * (usually) be: 1800 MHz and 1200 MHz.
*/
map3 {
trip = <&cpu_alert3>;
@@ -131,16 +131,16 @@
/*
* When reaching cpu_alert4, reduce CPU
- * further, down to 600 MHz (11 steps for big,
- * 7 steps for LITTLE).
+ * further, down to 600 MHz (13 steps for big,
+ * 8 steps for LITTLE).
*/
- map5 {
+ cooling_map5: map5 {
trip = <&cpu_alert4>;
- cooling-device = <&cpu0 3 7>;
+ cooling-device = <&cpu0 3 8>;
};
- map6 {
+ cooling_map6: map6 {
trip = <&cpu_alert4>;
- cooling-device = <&cpu4 3 11>;
+ cooling-device = <&cpu4 3 13>;
};
};
};
Index: b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
===================================================================
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts 2016-12-15 12:43:54.365955950 +0100
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts 2016-12-15 12:43:54.361955949 +0100
@@ -21,6 +21,28 @@
compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
};
+/*
+ * Odroid XU3-Lite board uses SoC revision with lower maximum frequencies
+ * than Odroid XU3/XU4 boards: 1.8 GHz for A15 cores & 1.3 GHz for A7 cores.
+ * Therefore we need to update OPPs tables and thermal maps accordingly.
+ */
+&cluster_a15_opp_table {
+ /delete-node/opp at 2000000000;
+ /delete-node/opp at 1900000000;
+};
+
+&cluster_a7_opp_table {
+ /delete-node/opp at 1400000000;
+};
+
+&cooling_map5 {
+ cooling-device = <&cpu0 3 7>;
+};
+
+&cooling_map6 {
+ cooling-device = <&cpu4 3 11>;
+};
+
&pwm {
/*
* PWM 0 -- fan
Index: b/arch/arm/boot/dts/exynos5800-peach-pi.dts
===================================================================
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts 2016-12-15 12:43:54.365955950 +0100
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts 2016-12-15 12:43:54.361955949 +0100
@@ -146,6 +146,15 @@
vdd-supply = <&ldo9_reg>;
};
+/*
+ * Peach Pi board uses SoC revision with lower maximum frequency for A7 cores
+ * (1.3 GHz instead of 1.4 GHz) than Odroid XU3/XU4 boards. Thus we need to
+ * update A7 OPPs table accordingly.
+ */
+&cluster_a7_opp_table {
+ /delete-property/opp at 1400000000;
+};
+
&cpu0 {
cpu-supply = <&buck2_reg>;
};
Index: b/arch/arm/boot/dts/exynos5800.dtsi
===================================================================
--- a/arch/arm/boot/dts/exynos5800.dtsi 2016-12-15 12:43:54.365955950 +0100
+++ b/arch/arm/boot/dts/exynos5800.dtsi 2016-12-15 12:43:54.361955949 +0100
@@ -24,6 +24,16 @@
};
&cluster_a15_opp_table {
+ opp at 2000000000 {
+ opp-hz = /bits/ 64 <2000000000>;
+ opp-microvolt = <1250000>;
+ clock-latency-ns = <140000>;
+ };
+ opp at 1900000000 {
+ opp-hz = /bits/ 64 <1900000000>;
+ opp-microvolt = <1250000>;
+ clock-latency-ns = <140000>;
+ };
opp at 1700000000 {
opp-microvolt = <1250000>;
};
@@ -85,6 +95,11 @@
};
&cluster_a7_opp_table {
+ opp at 1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-microvolt = <1250000>;
+ clock-latency-ns = <140000>;
+ };
opp at 1300000000 {
opp-microvolt = <1250000>;
};
More information about the linux-arm-kernel
mailing list